Guide

AIA Professional Service Invoice:Architect Fee Invoices Under B101, the F702 Invoice for Maintenance Work, G702 Pay Applications and Two Filled Pittsburgh Invoices

AIA professional service invoice: architect fee billing under B101, AIA's F702 maintenance invoice, how both differ from G702, with Pittsburgh samples.

By Published Updated

11 min read

An AIA professional service invoice is an architect's bill to an owner under an AIA owner-architect agreement such as B101-2017: fees earned by phase or by time, additional services and reimbursable expenses, on the payment terms the agreement sets. A maintenance contractor working under AIA documents bills on a different form, F702-2023, Invoice for Maintenance Work.

The label leads to a specific mistake. A facility manager asks a maintenance contractor for "an AIA invoice", and the contractor sends a G702 pay application with a schedule of values and retainage, a construction form the owner's maintenance agreement never mentions. Or an architect's office copies a contractor's pay application and bills its fee as if it were construction progress. This guide is one of the invoicing and getting paid guides from FieldRanger. It separates the three AIA billing documents first, then covers the architect's fee invoice under B101 and the payment terms behind it, and the F702 invoice for maintenance work and its fill points. Two filled samples from Pittsburgh, Pennsylvania follow, one for each, then a checklist and the software record.

Four terms carry the guide. AIA Contract Documents are the standard contracts and forms published by the American Institute of Architects. Basic services are the architect's services in the five phases of B101: schematic design, design development, construction documents, procurement and construction. A reimbursable expense is a cost the architect incurs for the project and bills at cost or as the agreement allows. A maintenance agreement in the AIA family is an owner's contract with a contractor for building repair, maintenance or improvement, under the F-series documents published in 2023.

Three AIA billing documents compared

AIA publishes forms for three billing relationships, and each follows a different contract. AIA's facility management FAQ draws the line for maintenance work: maintenance contractors "do not work towards 'substantial completion'" and are paid "through an invoicing system rather than through applications and certifications for payment" (AIA Contract Documents, facility management FAQs, checked November 13, 2026).

AIA billing documents by issuer, basis and governing agreement
DocumentIssuer and basisGoverning agreement
Architect's invoice for professional servicesArchitect; fee by phase percent, milestone or hours, plus additional services and reimbursablesB101-2017 or another owner-architect agreement
G702 application and certificate for paymentConstruction contractor; work completed and stored against a schedule of values, less retainage, certified by the architectOwner-contractor construction contract
F702-2023 invoice for maintenance workMaintenance contractor; maintenance work performed, by line itemF101 with an F201 or F202 work order, F102 or F103

The G702 and its continuation sheet are set out field by field in the AIA progress billing template. The two documents in this guide share one property the G702 lacks: neither is certified by a design professional before payment. Each is checked by the client against the agreement's payment terms.

Architect fee invoice under B101-2017

B101-2017 is AIA's standard owner-architect agreement for building design and construction contract administration. AIA's instructions state that it "may be used with a variety of compensation methods, including percentage of the budget for construction cost and stipulated sum" (AIA, Instructions for B101-2017). Article 11 holds the basis of compensation, and the instructions list the time-based alternatives: multiple of direct salary expense, multiple of direct personnel expense, professional fee plus expenses, and hourly billing rates. Other methods listed are a multiple of consultants' billing, square footage, unit cost and royalty.

The instructions also state that "the AIA makes no recommendations and has no guidelines or schedules that specify the amount of compensation an architect should be paid." The fee split across phases and any multiple are therefore negotiated terms, and the invoice can be checked only against the agreement that states them.

An architect's invoice under a stipulated sum shows, for each phase, the fee allocated, the percent complete, the fee earned to date, the amount previously billed and the amount now due. Additional services appear as separate lines on their own basis, and reimbursable expenses as a third group with receipts. A fee invoice is not a pay application: it carries no schedule of values for construction work, no stored materials and no retainage line unless the agreement adds one.

Payment terms an architect sets in the agreement

AIA's best practice on getting paid places the terms in the contract. The agreement "should define the payment timing/interval and the basis of the invoice", and the basis "might be the percentage of completion of the phase or milestones or an estimate of hours" (AIA Best Practices, Getting paid, excerpted from The Architect's Handbook of Professional Practice, 15th edition). The same paper lists questions to settle at the start: who on the client's side reviews and approves the invoice, the best date to receive it, whether "any special information or format" is required, and how long payment takes after receipt.

For a client who does not pay, the paper lists making deliverables contingent on payment, charging interest, withholding services "when other alternates have been exhausted", and filing a lien, noting that lien "laws vary from state to state" and that a "limited window of opportunity" may apply. Each remedy works only if the agreement provides for it, which is the reason the invoice cites the agreement it bills under.

F702-2023 invoice for maintenance work

F702-2023 is AIA's standard invoice for a maintenance contractor requesting payment for work performed. It requires the contractor to identify the maintenance agreement or work order contract under which payment is requested, contains a chart describing the portions of work and their amounts, a prompt for payment instructions, and a place to list supporting documents "such as receipts or subcontractor invoices" (AIA, Summary of F702-2023). It may be used under F101 with an F201 or F202 work order, and under the stand-alone F102 and F103 agreements.

The F-series covers the work field crews do for building owners. AIA describes as-needed services as discrete repairs and simple improvements, such as "roof repairs, façade painting, parking lot striping, HVAC repairs", and ongoing services as repetitive upkeep, such as "HVAC maintenance, cleaning services, lawn care, and snow removal" (AIA Contract Documents, facility maintenance agreements).

F702-2023 fill points and what each holds, from AIA's instructions
Fill pointWhat it holds
PartiesNames as they appear on the maintenance agreement
Invoice numberSequential in the order invoices are issued during the agreement's term
Date of issuanceThe date the contractor submits the invoice
Payment due dateThe date the client will pay
Agreement or work orderThe date on the cover page of the agreement or work order billed
Invoice descriptionNumbered lines with the work performed, its location and dates, and materials or equipment purchased
Payment instructionsWiring instructions, check payee name and remittance address
OtherOther terms, or a reference to attachments that contain them
SignatureSigned and dated in the manner of the agreement or work order

The fill points come from AIA's published instructions (AIA, Instructions for F702-2023). The form itself is copyrighted, and the instructions state that it "may not be reproduced or excerpted from without the express written permission of the AIA". A contractor asked to bill on F702 obtains the form under an AIA license. Where the agreement permits the contractor's own invoice, the same fill points can be carried on it, and the instructions warn that mixing AIA and non-AIA documents requires care "to achieve consistency of language and intent".

Filled architect fee invoice: Pittsburgh office renovation

The invoice below is a sample for a hypothetical architect on an office renovation in Pittsburgh. The fee, phase split, progress, hours and multiple are sample inputs. The time-based line uses published rates: the median wage for architects in Pittsburgh is $40.12 an hour (O*NET, Pennsylvania wages, BLS 2025 wage data). Wages and salaries were 70.0 percent of private industry compensation in the second quarter of 2026 (BLS series CMU2020000000000P), which gives a direct personnel expense of $57.31 an hour. At a sample multiple of 2.6, the billed rate is $149.01.

Sample architect invoice 5, stipulated sum of $96,000 for basic services (sample fee, phase split and progress)
LineBasisAmount
Schematic design$14,400 allocated, 100 percent complete$14,400.00 earned
Design development$19,200 allocated, 100 percent complete$19,200.00 earned
Construction documents$38,400 allocated, 50 percent complete$19,200.00 earned
Procurement and construction$24,000 allocated, 0 percent complete$0.00 earned
Fee earned to dateSum of the phase lines$52,800.00
Less previous invoicesInvoices 1 to 4−$43,200.00
Basic services dueEarned less billed$9,600.00
Additional services12 hours of owner-requested layout studies × $149.01$1,788.12
Reimbursable mileage140 miles × $0.76, the IRS business rate from July 1, 2026$106.40
Reimbursable printingReceipt attached (sample)$206.00
Total due$11,700.52

The mileage line uses the IRS business rate (IRS standard mileage rates, updated July 28, 2026); whether reimbursables are billed at cost or with a markup is a term of the agreement. The owner checks two figures against the agreement: the phase allocation behind each percent, and the authorization for the 12 additional hours. The percent complete is the architect's statement, so the backup the AIA paper suggests, a fee schedule tied to the project schedule, is what lets the owner accept it.

Filled maintenance invoice: quarterly HVAC visit under F103

The second sample is a hypothetical HVAC maintenance contractor billing a Pittsburgh office building under an F103 agreement for ongoing maintenance. Prices and dates are sample inputs, and the fields follow the F702 fill points above rather than reproducing the form.

Sample maintenance invoice 4 under an F103 agreement dated March 2, 2026 (sample contractor, building and prices)
Fill pointEntry
PartiesClient and contractor as named on the agreement's cover page
Invoice number4, the fourth invoice issued during the term
Date of issuanceOctober 31, 2026
Payment due dateNovember 30, 2026, per the agreement's 30-day term
AgreementF103 dated March 2, 2026
Line 1Quarterly preventive maintenance, three rooftop units, Building A roof, October 14, 2026: $1,450.00
Line 2Filters purchased for the three units, supplier receipt attached: $386.20
Total$1,836.20
Supporting documentsSupplier receipt; service report for the October 14 visit
Payment instructionsRemittance address and check payee name

The invoice is short because the agreement carries the terms. A client paying under F103 matches the invoice number to the term, the line to the agreement's scope and the filter line to the receipt. A sales tax line is added where the state taxes the service or the materials. Work outside the agreement's scope is not added as a third line. It goes through an amendment on F701-2023 or, under a master agreement, a new work order; AIA describes the F701 as the document for changes to "the contractor's compensation and schedule" (AIA Contract Documents). The service invoice guide covers the same contents for residential customers, where no agreement form governs the bill.

AIA invoice checklist for architects and maintenance contractors

  • The agreement identified on the invoice by form number and date.
  • Parties named exactly as on the agreement's cover page.
  • Invoice numbers sequential within the agreement's term.
  • Architect invoices: phase allocation, percent complete, fee earned, previous billing and amount due for each phase.
  • Additional services billed on their own basis, with the owner's authorization referenced.
  • Reimbursables listed with receipts, at cost or at the markup the agreement allows.
  • Maintenance invoices: numbered lines with work performed, location and dates, and materials purchased.
  • Supporting documents listed and attached: receipts, subcontractor invoices, service reports.
  • Payment instructions and due date matching the agreement's payment term.
  • No schedule of values or retainage line unless the agreement calls for one.
  • F702 used under an AIA license, or the contractor's own invoice where the agreement permits.
  • Delivery confirmed, whether sent electronically or through an invoice mailing service.

Invoices from work orders in FieldRanger

FieldRanger produces the maintenance contractor's invoice from the job record. Digital work orders carry the job details and instructions on the technician's phone, custom checklists hold the visit tasks, and before and after photos attach to the work order. The invoice is generated from the completed work order, and invoices can stay in FieldRanger or sync to HubSpot as HubSpot invoices. Invoices and payments sync with QuickBooks, payment in the field goes through Stripe, and recurring job templates hold maintenance contracts and repeat service calls. The contractor invoicing software page shows the invoice built from the work order.

An owner who requires F702 receives it on the licensed form, with the FieldRanger work order and photos attached as backup. Progress billing and retainage are not built, so a G702 pay application is prepared outside FieldRanger. Phase-percent fee billing is a form of progress billing and is outside the product for the same reason. A plain invoice template covers the residential bill.

Frequently asked questions

What is an AIA professional service invoice?

An architect's invoice to an owner under an AIA owner-architect agreement such as B101-2017, billing fees by phase percent, milestone or hours, plus additional services and reimbursable expenses, on the agreement's payment terms.

Does AIA have an invoice form for maintenance contractors?

Yes. F702-2023, Invoice for Maintenance Work, is used with the F101 master agreement and its F201 or F202 work orders, and with the stand-alone F102 and F103 agreements. It identifies the agreement, lists the work by line, gives payment instructions and lists supporting documents.

Is a G702 the same as an AIA invoice?

No. The G702 is an application and certificate for payment under a construction contract, built on a schedule of values with retainage and certified by the architect. Architects bill fees on their own invoice, and maintenance contractors bill on F702 or the invoice their agreement allows.

How do architects bill under B101?

By the compensation method in Article 11: a stipulated sum or percentage of construction cost billed by phase, or a time-based method such as a multiple of direct personnel expense or hourly rates. AIA states that it makes no recommendation on the amount of compensation.

Can an AIA invoice form be copied into a template?

AIA states that its documents may not be reproduced or excerpted without its written permission. A contractor uses the form under an AIA license, or its own invoice carrying the same information where the agreement permits.

Invoice 4 and the cover-page date

Each Pittsburgh invoice is checked against a cover page: invoice 5 against the B101 phase allocation, invoice 4 against the F103 dated March 2, 2026. Neither is a G702. An owner who asks for "an AIA invoice" is asking for whichever of the two the agreement names, and the agreement is the first document to read. The aia progress billing template covers the construction pay application, and the invoicing and getting paid guides cover collection after the invoice is sent. Work-order invoicing can be tried for 14 days without a card from pricing.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo