Feature
GPS Time Tracking App for Field Service Teams on HubSpot
GPS time tracking app for field crews: each clock-in and clock-out records the technician's location and logs hours to the job, on the same records as HubSpot.
A GPS time tracking app records when a field worker starts and stops work, and where the phone was at each of those moments. In FieldRanger, every clock-in and clock-out carries the technician's location and is logged against a specific job, so timesheet hours match the job sites where they were worked.
Time tracking is one of the field service management features that run on the same HubSpot records as the sales pipeline. The job came from a won deal; the hours worked on it, the job status and the completion note all stay attached to that job and that customer. A separate time clock app holds hours by employee and by day, with no tie to the customer who paid for the work.
Location-stamped clock-ins in FieldRanger
The path from a signed deal to a closed timesheet entry runs in six steps.
- A deal is marked won in HubSpot. FieldRanger creates a job from it, with the deal's context carried over.
- The dispatcher assigns the job to a technician by dragging it onto the calendar.
- The technician opens the job in the FieldRanger mobile app and clocks in on arrival. The clock-in stores two facts: the time, and the phone's location at that moment.
- Time accrues against that job. A technician with three visits in a day produces three job time entries, not one block of eight hours.
- At the end of the visit, the technician clocks out. The clock-out stores the time and the location again.
- The job status changes, and the dispatcher sees the change in real time. The completion is logged to the HubSpot timeline.
The result is a time entry with four anchors: start time, start location, end time and end location, all tied to a job with a customer, an address and a deal. A clock-in recorded far from the job address is the exception worth a phone call; a matching one needs no review.
Clock-event location and continuous tracking
A GPS time clock app does not necessarily track a worker all day. Time clock apps capture location in one of three designs, and the difference matters for privacy, battery and evidence.
Clock-event location records the position only at clock-in and clock-out. It answers one question: was the technician at the job when the hours started and stopped. FieldRanger records location this way for time entries.
Continuous tracking, sometimes called breadcrumbs, samples the phone's position at intervals for the whole shift. The route trail it produces includes breaks and drives, which raises the consent questions covered under limits below.
Geofence-triggered clocks fire a reminder or an automatic clock-in when the phone crosses a boundary around the job site. Their accuracy depends on the boundary size and the phone's location fix.
Vehicle position is a separate record from worker position. FieldRanger tracks vehicles on a live map and raises alerts for geofence exits, speeding and idle time; that belongs to fleet, not to the timesheet. Tools, ladders and machines have a third record of their own in the equipment tracking software.
Geofencing: definition, mechanism and accuracy
Geofencing is the use of a virtual boundary around a real location to trigger an action when a device enters, exits or stays inside it. On Android, a geofence is defined by a latitude, a longitude and a radius, which together form a circle; the app can ask for entry events, exit events or a dwell event after a set time inside (Android Developers, geofencing guide, checked November 2026).
The mechanism has three parts. The app registers the boundary with the phone's location service. The operating system estimates the phone's position from GPS, Wi-Fi and cell signals. When the estimate crosses the boundary, the operating system notifies the app, which then records an event or shows a prompt.
Accuracy is set by the position fix, not by the boundary drawn on the map. GPS-enabled smartphones are accurate to within a 4.9 meter (16 foot) radius under open sky, and the accuracy worsens near buildings, bridges and trees (GPS.gov, GPS accuracy, checked November 2026). Android's guidance puts Wi-Fi location accuracy at 20 to 50 meters and recommends a minimum geofence radius of 100 to 150 meters (Android Developers, checked November 2026). The same guide states that geofence alerts can arrive late: the latency is under two minutes in the usual case and up to six minutes for a phone that has been stationary.
Two consequences follow for field crews. A boundary drawn tightly around one house in a dense street will report false exits. A clock-in recorded indoors, in a basement or a plant room, will carry a wider error than one recorded at the van.
Geofencing advertising applies the same mechanism to marketing: an ad network targets phones that have entered a boundary. Time tracking uses the boundary as evidence of presence at work, not as an audience.
Time records in HubSpot
FieldRanger runs on HubSpot, so the job behind each time entry is visible from the CRM. Three things change there as a technician works.
The deal record shows the job status. A sales rep who closed the deal reads the state of the work from the deal itself, without asking the office.
The HubSpot timeline receives job completions, notes and updates, so the contact's history reads in order from first inquiry to completed visit.
Job status changes can trigger HubSpot workflows. A workflow on completion can send a follow-up email, create a task for the office or update a property used in reporting. FieldRanger fields can also be mapped to HubSpot custom properties.
The hours themselves are logged against the job in FieldRanger. For the job side of the same record, the job tracking software page covers status from scheduling to completion.
Hours records and overtime rules
Location-stamped time entries serve a legal record as well as an operational one. The Fair Labor Standards Act requires employers to keep, for each non-exempt worker, the hours worked each day and the total hours worked each workweek; time cards are kept for two years (U.S. Department of Labor, Fact Sheet #21, revised July 2008). Overtime is due at one and a half times the regular rate for hours over 40 in a workweek, and averaging hours across two or more weeks is not permitted (U.S. Department of Labor, Fact Sheet #23, revised October 2019).
Qualified overtime tracking now has a tax consequence too. The federal deduction for qualified overtime compensation covers the pay above the regular rate, up to $12,500 a year or $25,000 for joint filers (IRS, What to know about the No Tax on Overtime deduction, March 2026). The premium portion can only be computed from accurate daily and weekly hours.
Job-level clock records supply those hours. FieldRanger is not a payroll system: pay rates, overtime premiums, tax withholding and wage statements belong to the payroll provider.
Examples by trade
HVAC maintenance. A technician runs four seasonal tune-ups in a day. Each visit has its own clock-in and clock-out at its own address. The service manager sees the time per visit by customer, which is the input for pricing the next maintenance contract.
Electrical contracting. An electrician works a panel upgrade across three days. Each day is its own job, since multi-day jobs are not built, and each carries a located clock-in and clock-out, so the upgrade's labor hours are the sum of three located entries rather than an estimate written at the end.
Lawn care and landscaping. A crew lead moves between a dozen properties on a route. The located clock events show the arrival at each one, and an unusually long visit shows up for review before the next invoice.
Time clock apps and field service software compared
An employee time clock app and field service software solve different problems. A standalone time clock app records hours by person and by day for payroll. Field service software records hours by job, and the job belongs to a customer, an address and a deal.
A dedicated time clock app is the better choice for some businesses. A crew that needs continuous route trails, automatic clock-ins on geofence entry, break rules, paid time off or a direct payroll connection is served better by a tool built only for time. Several of these tools have a free tier: Clockify lists free basic features on clockify.me (checked November 2026). A business with no jobs to tie hours to gains nothing from a job-based clock.
FieldRanger fits the business whose hours need to land on jobs that already live in HubSpot.
Limits of the feature
- Location is recorded with the clock-in and the clock-out. Continuous position on a map is a fleet feature, and it follows the vehicle.
- FieldRanger does not calculate pay. Hours go to the payroll provider, which applies rates and overtime rules.
- A location fix shows where the phone was, not where the person was. A phone left in the van records the van.
- Phone GPS is less accurate indoors and between tall buildings, as described above.
- Employee location tracking is subject to state notice and consent rules. The employer should tell technicians what the app records, and when.
Frequently asked questions
How does geofencing work?
An app registers a boundary, a point and a radius, with the phone's location service. The operating system estimates the phone's position from GPS, Wi-Fi and cell signals and notifies the app when that position crosses the boundary.
What is geofencing?
Geofencing is the use of a virtual boundary around a real place to trigger an action when a device enters, leaves or stays inside it. Time clock apps use it at job sites; fleet tools use it to alert on vehicles leaving an area.
How accurate is geofencing?
As accurate as the phone's position fix. GPS.gov puts smartphone GPS within about 4.9 meters under open sky, and Android's guidance puts Wi-Fi location at 20 to 50 meters and recommends a geofence radius of at least 100 meters. Buildings, trees and indoor use widen the error.
How to set up geofencing?
Define the location as a latitude and longitude, choose a radius large enough for the phone's location error, choose the events to watch (entry, exit or dwell), and grant the app location permission. On Android 10 and later, background geofencing also needs the background location permission.
Which of the following pertains to geofencing?
Location-based services. A geofence is a virtual perimeter around a real location, and the action is triggered when a GPS-, Wi-Fi- or cell-located device crosses it.
How to track hours worked?
Record the start and end time of each work period, then total the hours for each day and each workweek, as federal rules require for non-exempt workers. In FieldRanger, each clock event also records its location and the job the hours belong to.
Which app is best for employee time tracking?
It depends on what the hours are for. A standalone time clock app suits a business that needs hours for payroll only. Field service software such as FieldRanger suits a business that needs hours tied to jobs, customers and deals in HubSpot.
Is there a free time clock app?
Yes. Several time clock apps offer a free tier, such as Clockify's free basic features. FieldRanger offers a 14-day free trial with no card required.
Time tracking within FieldRanger
Hours recorded against jobs feed the rest of the system. The status those hours belong to is covered by the job tracking software, and the field service management features hub maps the whole product. Start free trial for 14 days with no card, or compare the plans on pricing.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo