Industry

Electrical Contractor Software That Runs on HubSpot

Electrical contractor software on HubSpot: FieldRanger books service calls and each project day as its own job, assigns licensed electricians and invoices.

Updated 6 min read

Electrical contractor software schedules, dispatches and records an electrical shop's work, from a dead-circuit service call to a multi-day panel replacement, and turns each completed job into an invoice. FieldRanger does this inside HubSpot: a won deal becomes a job, each day of a longer project is its own job, electricians work from a mobile app, and job status returns to the HubSpot deal.

Electrical is one of the trades in field service software by industry, and an electrical contractor runs two businesses on one calendar. Service work is short and unplanned: a tripping breaker, a dead outlet, a surge after a storm. Project work is long and staged: a service upgrade, an EV charger circuit, a tenant fit-out with rough-in and final inspections. Electrician software has to hold both without one crowding out the other.

The search term also reaches neighboring products. Takeoff software counts devices and wire from a set of plans; electrical design software draws the system. FieldRanger does neither. It handles the work after the estimate is accepted.

Licenses, permits and the code edition on each job

821,000

electrician jobs in the U.S. in 2025Source: BLS Occupational Outlook Handbook, modified August 27, 2026

Electrical work is licensed work. The Bureau of Labor Statistics states that "Most states require electricians to be licensed", that licensing tests cover "the National Electrical Code and state and local electrical codes", and that work schedules "may include evenings and weekends" (BLS Occupational Outlook Handbook, modified August 27, 2026).

The code itself changes by place and date. Texas adopted "the 2026 National Electrical Code as the state electrical code", effective September 1, 2026, with a limited exception for ground-fault protection on certain outdoor outlets (Texas Department of Licensing and Regulation, September 1, 2026). Washington's Department of Labor and Industries states that "The 2026 NEC will replace the current 2023 NEC edition on Dec. 31, 2026" (Washington L&I, checked November 2026). A contractor working across a state line in late 2026 can have two code editions on the same week's schedule.

FieldRanger does not track code editions or pull permits. It holds the job record those obligations attach to. Customer notes carry the permit details every team member can see, job-specific checklists list the inspection steps, and skill-based assignment matches each job to an electrician by license and expertise.

A service upgrade from estimate to paid invoice

Site visit and estimate. A homeowner adding an EV charger needs a larger service. The lead is a HubSpot contact with an open deal. The estimator photographs the existing panel and builds the estimate on the HubSpot deal or in FieldRanger; either way it stays tied to the deal, and PandaDoc can send it for signature.

Won deal to job. The signed deal is marked won, and FieldRanger creates the job with the deal's context carried over. The permit application and the utility disconnect are arranged outside FieldRanger, and their dates go onto the job.

Scheduling. The dispatcher drags the job onto a licensed electrician's calendar. Conflict detection warns of a double-booking, and arrival windows are set for the utility appointment.

Materials. The crew checks the panel, breakers and wire out of a specific warehouse, so stock is counted where it actually sits. Materials used are logged against the job for job costing.

Installation and inspection. On site the electrician works from the digital work order. Photos of the panel before work, at rough-in and at completion attach to the work order. Job status updates show the dispatcher whether the job is waiting on inspection, and a status change can trigger a HubSpot workflow that tells the customer the inspection date.

Sign-off and invoice. The customer signs on site as proof of completion. The invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. The completion and notes are logged to the HubSpot timeline.

Estimates for this kind of job are covered on the electrical estimating software page.

Service calls and project work on one calendar

Multi-technician views show every electrician side by side with availability and current assignments. A service call that arrives mid-morning goes to an electrician whose day has room on that view, and dynamic rerouting adjusts the electrician's route. Each day of project work is its own job on an electrician's calendar, so conflict detection flags a service call dropped onto that day.

Service routes are built automatically. FieldRanger builds each electrician's route for the day and sequences the stops to cut drive time, with turn-by-turn navigation in the app. The electrical dispatch software page covers the board in detail, and the dispatch software page explains the dispatcher's board in general terms.

Electrical tasks and the FieldRanger feature that handles each
Electrical taskFieldRanger feature
Sending a licensed electrician to a service changeSkill-based assignment by certification and expertise
Wire, breakers and devices for the jobWarehouse-specific checkout, low-stock warnings
Proof of the work before drywall closes itBefore and after photos on the work order
Lockout steps and the inspection listJob-specific checklists
Hours on a three-day fit-outClock-ins and clock-outs with location, time logged per job
Margin on panel work against service callsRevenue and margin by customer or service type
Vans on the roadReal-time vehicle location, vehicle assignment

Electrical contractor CRM and the HubSpot record

An electrical contractor crm tracks two kinds of customer: homeowners who call once, and builders, property managers and general contractors who send work all year. HubSpot models the second kind as companies with associated contacts and deals. Contacts and companies sync both ways between FieldRanger and HubSpot, so a builder's account in HubSpot shows the jobs FieldRanger completed for it.

Revenue attribution follows money from lead to completed job in HubSpot reports, by company as well as by contact. A sales rep chasing the next tenant fit-out sees the job status on each open deal and the timeline of completed work, without a FieldRanger login. The HubSpot field service page covers each record a FieldRanger job writes back to HubSpot.

Takeoff, progress billing and project scheduling outside FieldRanger

FieldRanger is not takeoff or design software, and it does not perform load calculations. FieldRanger does not do progress billing or retainage, so a contractor billing commercial projects on schedules of values keeps that process in the accounting system, which receives invoices and payments from FieldRanger through QuickBooks sync. Project work in FieldRanger is scheduled as jobs on the calendar, one job per day; Gantt charts and critical-path schedules are the territory of electrician project management software built for construction.

Electrical guides, templates and sibling pages

Electrical contractor software questions

What is electrical contractor software?

Electrical contractor software schedules service calls and project jobs, assigns electricians, records the work on site and turns completed jobs into invoices. FieldRanger does this inside HubSpot, on the same records as the sales pipeline.

What is the best software for electrical contractors?

The fit depends on the work mix and the CRM. A shop that sells through HubSpot and runs service and small projects is the case FieldRanger is built for; a contractor that needs plan takeoff or progress billing on large commercial projects needs construction software for that part.

Is there an app for electricians in the field?

FieldRanger includes native iOS and Android apps built for technicians in the field, and they keep working without signal. The app shows the work order and checklist, opens directions with one tap, takes photos inside the app and collects the customer's signature.

What is electrical work order software?

Electrical work order software puts job details, customer information, instructions and checklists on the electrician's phone. In FieldRanger the completed work order generates the invoice and logs the completion to the HubSpot timeline.

Can electrician software assign jobs by license?

FieldRanger matches jobs to technicians by certification and expertise, so a service change can be matched to an electrician who holds the license it requires.

How much does electrician software cost?

Plans are listed on the pricing page and priced per technician. The 14-day trial needs no card and is long enough to run a week of service calls and a panel job through to invoices.

Panel work and service calls compete for the same electricians every week, and the electrical dispatch software page shows how one calendar holds both. The full list of trades is under field service software by industry; plans are on pricing, and Start free trial runs 14 days without a card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo