Industry

FieldRanger for Plumbing:Plumbing Software That Runs on HubSpot

Plumbing software on HubSpot: book drain calls and water heater installs, dispatch plumbers, record photos and parts, and bill from the finished work order.

Updated 7 min read

Plumbing software runs a plumbing company's work from the first call to the paid invoice: booking, dispatch, the plumber's work order, photos, parts, hours and billing. FieldRanger is plumbing field service software that runs inside HubSpot, so drain calls, water heater installs and repipes sit on the customer record the sales pipeline already uses.

Plumbing is one of the trades in field service software by industry, and emergencies set its schedule. The Bureau of Labor Statistics counts 510,600 plumbers, pipefitters and steamfitters in 2025 and states that plumbers are often on call for emergencies, so evening and weekend work is common (BLS Occupational Outlook Handbook, plumbers, modified October 29, 2026). The plumber who clears a sewer backup at night may price a repipe the next morning: BLS lists preparing cost estimates for clients among the trade's duties.

Plumbing job types and the records each needs

Plumbing contractor software has to handle work that ranges from a single drain call to a new construction job that runs for weeks. The table pairs each job type with the scheduling it needs and the record the plumber leaves.

Plumbing job types, their scheduling and their records in FieldRanger
Job typeSchedulingRecord on the work order
Emergency call: burst pipe, no water, sewer backupSame day, next available plumber, route rebuilt around itPhotos of the damage, hours, parts used, customer signature
Drain cleaning and hydro-jettingSame day or booked; jetter checked out by QR codeBefore and after photos, equipment use, notes for a follow-up estimate
Water heater replacement, tank or tanklessBooked install from a won HubSpot dealOld and new data plate photos, parts, signature
Sewer camera inspectionBooked; camera checked out by QR codePhotos and findings that feed the repair estimate
Repipe or remodel rough-inEach day booked as its own jobEstimate tied to the deal, materials logged, daily hours
Backflow testRepeat interval set by the local water authority, from a recurring templateChecklist, test result in the notes, signature
New construction: underground, rough-in, top-out, trimPhased visits matched to the builder's schedulePhotos for the inspector, hours per visit

Plumbing and heating software adds boiler service, radiant floors and hydronic repairs to the same calendar. The workflow does not change; skill-based assignment sends a boiler call to a plumber with that expertise.

Plumbing CRM on HubSpot

A plumbing CRM records who called, what was quoted, what was done and what is due next. HubSpot holds the contacts, companies and deals; FieldRanger keeps contacts and companies in two-way sync and adds the field record. A won deal for a water heater replacement becomes a job with its context carried over, and the deal record shows the job's status, so the person who sold the replacement can see whether it is installed without asking the dispatcher.

Revenue can be followed from lead to completed job in HubSpot reports. That answers a question plumbing marketing spend raises: which source produced the repipes, and not only the leads. Photos taken on the job sync to the customer's HubSpot record, and job completions, notes and updates appear on the timeline. The HubSpot field service overview covers the full sync, including custom property mapping and selective sync.

A drain call from first ring to paid invoice

The steps below follow one same-day drain call, the core job of plumbing service software, through FieldRanger and HubSpot.

  1. The call comes in through HubSpot calling or Aircall and is logged on the customer's HubSpot record. The office finds the caller in HubSpot or adds a new contact, which syncs to FieldRanger, and creates the job.
  2. The dispatcher opens the FieldRanger calendar, where every plumber appears side by side with availability and current assignments, and drags the call onto a plumber's day inside an arrival window. Conflict detection warns of a double-booking before it is saved. The plumbing scheduling software page covers dispatch rules for emergency and booked work.
  3. FieldRanger adjusts the plumber's route when the job is added, with live traffic feeding the arrival estimate. Methods that apply across trades are described on the dispatch software page.
  4. The plumber receives a push notification in the FieldRanger mobile app, taps to navigate, and opens the digital work order with the customer's notes, such as the cleanout location or a main shutoff that sticks.
  5. The plumber photographs the line before and after clearing it, logs the parts used, and records hours through clock-ins that store the plumber's location.
  6. The customer signs on the phone as proof of completion, and the job completion is logged to the HubSpot timeline.
  7. The invoice is generated from the completed work order, with the drain clearing priced at its flat rate from the price book, payment is taken on site through Stripe, and invoices and payments sync to QuickBooks. The plumbing billing software page covers invoicing in detail.

Parts, equipment and plumbing job costing

Plumbing job costing software compares what a job earned with what it consumed. In FieldRanger, plumbers check parts and materials out of a specific warehouse, so fittings, PEX, valves and water heaters are counted where they sit, and low-stock warnings prompt a reorder before a size runs out. Materials used on each job are logged for job costing, and time is logged against each job. Revenue reports show revenue and margin by customer or service type, which separates drain work, water heaters and repipes.

Asset tracking software for plumbers covers the expensive tools. A jetter, a sewer camera or a pipe-freezing kit carries a QR code: scanning it checks the tool in or out, the usage history shows who had it last, and maintenance can be scheduled for each machine. Trucks appear on a live map, with reminders for oil changes and inspections and a record of each vehicle's service.

Leak season, frozen pipes and recurring plumbing maintenance

Plumbing demand moves with the calendar. Winter brings frozen and burst pipes to the emergency board. Spring brings the EPA's Fix a Leak Week, held March 16 to 22 in 2026; the EPA estimates that household leaks waste nearly 1 trillion gallons of water a year nationwide, and that the average household's leaks waste more than 9,300 gallons a year (EPA WaterSense, Fix a Leak Week, updated March 13, 2026).

Plumbing maintenance software handles the planned side. Recurring job templates create repeat visits for backflow tests, water heater flushes and commercial drain maintenance, and bulk scheduling assigns a season of visits in one pass. Capacity planning flags a plumber whose day is full before an emergency is added to it, and skill-based assignment sends gas line or backflow work to plumbers holding the matching certification. Territories assign plumbers to service zones, so a cold snap's calls go to the plumber already working that part of town.

Frequently asked questions

What is the best software for a plumbing business?

Software that fits how the business sells and dispatches: emergency service, booked installs, new construction or commercial maintenance. A plumbing company that runs sales and marketing in HubSpot is served by plumbing software on the same records, which is the case FieldRanger covers.

What is plumbing field service software?

Software for the field side of a plumbing company: scheduling and dispatching plumbers, the work order on the plumber's phone, photos, parts, hours, the customer's signature and the invoice.

What is the best small plumbing business software?

A small plumbing business can run on a calendar, an invoice template and an accounting package until calls, plumbers and trucks outgrow them. FieldRanger is priced per technician, and its 14-day trial needs no card.

Do plumbers need a CRM?

A CRM holds the customer history a plumber needs on the next call: past work, equipment, quotes and follow-ups. FieldRanger uses HubSpot as the CRM and adds jobs, job photos and job activity to the same customer records.

Does plumbing software include accounting?

FieldRanger is not accounting software. It syncs invoices and payments with QuickBooks, which keeps the books.

What is plumbing takeoff software?

Software that counts fixtures and measures pipe runs from construction drawings, so a plumbing contractor can bid new work. FieldRanger does not perform takeoff.

Plumbing work outside FieldRanger's scope

FieldRanger does not measure pipe or count fixtures from drawings; plumbing takeoff software does that for new construction bids, and the plumbing estimating software page covers the estimate that follows a site visit. FieldRanger is not plumbing accounting software: QuickBooks holds the books. A plumbing company that does not use HubSpot, and does not plan to, gains less from FieldRanger than from plumbing business software with its own CRM.

Plumbing guides, templates and local pages

Owners building a company can read how to start a plumbing business, which covers licensing, insurance, pricing and a business plan, a guide to starting an independent plumbing business, and how to grow a plumbing business. Marketing has three guides: plumbing marketing, plumber marketing and digital marketing for plumbers. Pricing work starts with the plumbing quote guide, the plumbing free estimate guide and the plumbing invoice template.

A plumbing job in FieldRanger starts on a HubSpot record, and its completion, notes and photos return to that record. Compare plans on pricing, book a demo to dispatch a real drain call, or Start free trial: 14 days, no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo