Comparison

Best Electrical Estimating Software:Labor Units, Assemblies, Price Services and Seat Costs for Seven Tools

Best electrical estimating software compared: McCormick, Accubid Anywhere, Electrical Bid Manager, Estimation MEP, TurboBid and Joist on labor units and price.

By Published Updated

13 min read

The best electrical estimating software is the one whose labor units and price service match the work being bid. McCormick, Trimble Accubid Anywhere and Electrical Bid Manager suit commercial estimators with assembly databases and supplier pricing; Trimble Estimation MEP publishes $1,950 a user a year; TurboBid suits small shops; Joist suits service quotes without takeoff.

A count of 212 duplex receptacles becomes a price only after each one carries a labor unit, an assembly and a material cost. On the sample figures below, moving the labor column from normal to difficult changes the bid by $1,738.40 before any price is touched. A stale price file lets the material lines drift from the supply house quote. Permits, licenses and service calls for electrical firms are covered on the electrical contractor software page; platforms that run the job after the bid are weighed in the field service software comparisons.

The comparison defines takeoff, labor units, assemblies and price services, with a labor calculation on sample figures, then states the criteria and tables seven tools. Entries follow in four groups, each with best fit, published price, strengths and limits: commercial suites, published-price tools for small shops, estimating inside a project platform, and service quotes. The last two sections cost two estimators over three years and run a past bid through a trial. Each vendor's site was read on 13 November 2026, and review scores play no part. Trimble's ConEst IntelliBid address now forwards to a general MEP page that does not list the product, so it is left out. General takeoff tools such as PlanSwift and STACK are compared in the best construction estimating software roundup. FieldRanger, from the publisher of this page, comes last among the entries, and that entry states that it does no takeoff.

Takeoff, labor units, assemblies and price services

Takeoff is the count and the measure: devices, fixtures and panels counted from the drawings, and conduit and wire runs measured along them. A labor unit is the installed hours assigned to one unit of an item, such as one receptacle or 100 feet of conduit. An assembly groups the parts one installed item needs: a receptacle with its box, plaster ring, cover plate and wire. A price service is the subscription that keeps material prices current, from a national database or a supplier's own price file.

Vendors express labor in columns. McCormick offers its own labor units "plus three levels of NECA's labor units"; Electrical Bid Manager gives each item "3 columns of labor units"; Accubid Anywhere supports multiple labor columns with company productivity units or preloaded industry rates. The estimator picks the column per job, as a judgment of how hard the installation will be.

The choice moves the bid. On sample figures, 212 receptacles at 0.40 hours each take 84.8 labor hours, and at 0.50 hours they take 106. At a sample loaded rate of $82 an hour, the difference is $1,738.40 on one line of the bid. The figures are illustrations, not published labor units.

Criteria for electrical estimating software

Each tool was read against eight points, all taken from its own published pages.

  1. Database: electrical items and pre-built assemblies, and whether low voltage and industrial work are covered.
  2. Labor units: how many labor columns, and whether NECA or other standard units are included.
  3. Takeoff: built-in digital takeoff and auto-count, or a separate takeoff tool.
  4. Price service: how material prices are updated, and whether supplier price files import.
  5. Change orders: pricing a change with the original estimate's assemblies and labor.
  6. Output: bid summary, proposal and material list for purchasing.
  7. Deployment: Windows, browser or phone.
  8. Published price, license terms and trial, dated.

Electrical estimating tools at a glance

Takeoff, labor and price data, and published price, from vendor pages checked 13 November 2026
ToolTakeoffLabor units and price dataPublished price
McCormickBuilt-in PDF takeoff, auto-count, Auto Home RunOwn units plus three levels of NECA units; supplier price updatesNot published
Trimble Accubid AnywhereAI-powered takeoff and Auto CountMultiple labor columns; Trade Service pricingNot published
Electrical Bid ManagerTakeoff modules; on-screen optionsThree labor columns; EPIC pricing serviceNot published
Trimble Estimation MEP ProAI-powered 2D takeoffStandard labor units; Trade Service and Luckins prices$1,950 per user/yr, US only
TurboBidOn-screen takeoff listed; PlanSwift bundle offeredLabor units; Trade and Target prices weekly$1,395 one-time on sale ($1,620 regular), or $135/mo
Procore Estimating2D and 3D takeoff, auto-countCustomizable database; adjustable labor unitsQuote
JoistNot namedNot namedPro $14.17/mo billed annually
FieldRangerNone; estimates built on the HubSpot deal or in FieldRangerOwn price book of services, parts and rates; the estimate writes the HubSpot deal's line items and amountPer technician; see [pricing](/pricing)

The price column divides the list. The three commercial suites publish no figure; the two tools that publish one are written for small shops.

Commercial electrical estimating suites

These three are built for estimators who bid from drawings every week. None prints a price, so a demo on a real drawing set is the way to cost them.

McCormick: Auto Home Run and NECA labor levels

Best for: commercial and industrial electrical contractors who bid from plans and want takeoff and pricing in one system. Price: not shown on the site, which asks for a demo request (mccormicksys.com, checked 13 November 2026).

Strengths: the electrical page lists a customizable database of over 55,000 items and 25,000 prebuilt assemblies, auto-count and a patented Auto Home Run feature, takeoff on the same screen as the estimate, price updates from major pricing services or a supply house, and separate databases for the USA and Canada (McCormick electrical estimating, checked 13 November 2026). The home page names labor units "plus three levels of NECA's labor units", a database covering residential, commercial, industrial, low voltage and high voltage work, bid proposals and material lists from the takeoff, and change order management.

Limits: the site states no price, license term or trial. The product covers plumbing and mechanical work too, so an electrical-only buyer confirms which databases a quote includes.

Trimble Accubid Anywhere: one cloud subscription

Best for: electrical and industrial mechanical contractors with estimators in more than one office. Price: not published; the page describes one subscription and offers a demo (Trimble Accubid Anywhere, checked 13 November 2026).

Strengths: cloud-based, spec-driven estimating and takeoff with AI-powered takeoff and Auto Count, and multiple labor columns using company productivity units or preloaded industry labor rates. Material, labor and vendor pricing comes from Trade Service. A change management module prices change orders from the original estimate's assemblies, with list and net pricing, overhead and markup. Supplier Xchange requests bid-time quotes from suppliers, and estimators in different offices share the same items, assemblies and projects.

Limits: no price is published, and the older mep.trimble.com product addresses now forward to a general Trimble MEP page.

Electrical Bid Manager: three labor columns and EPIC pricing

Best for: electrical contractors of any size who want an estimating system with its publisher's own pricing service. Price: not published; an annual software subscription covers activation, support, training, version updates and database updates, and a free trial is offered as a download (Vision InfoSoft software subscription, checked 13 November 2026).

Strengths: thousands of pre-built assemblies with "3 columns of labor units" on each item, takeoff modules for branch circuits, lighting and wiring devices, value engineering of wiring methods, conduit types and wire, and a bid review that adds non-productive labor, subcontracts and job expenses (Electrical Bid Manager, checked 13 November 2026). The EPIC service holds over 2 million electrical items with Trade and Target prices and supplier price-file imports, and states that it updates over 520,000 items and adds over 75,000 each month (EPIC Pricing, checked 13 November 2026). The product page names QuickBooks job costing.

Limits: no price is published, and on-screen takeoff is offered as options chosen with the vendor; the subscription page lists basic support for On-Screen Takeoff and PlanSwift. The product's own domain, electricalbidmanager.com, did not respond on 13 November 2026, so these facts come from its publisher's site.

Published-price estimating for small shops

These two print a price. They suit a shop with one or two estimators that wants the cost settled before a demo.

Trimble Estimation MEP Pro: $1,950 a user a year

Best for: small MEP contractors beginning to estimate in house, on a Mac or a PC. Price: Estimation MEP Pro is $1,950 per user a year in the United States; Canada, the UK and Ireland are quoted by sales (Trimble Estimation MEP, checked 13 November 2026).

Strengths: browser-based estimating with AI-powered 2D graphical takeoff and a managed item library of hundreds of thousands of items, most with list prices from Trade Service and Luckins (Trimble Estimation MEP). It ships thousands of assemblies, an assembly builder, labor factoring and "the included industry standard set of labor units". Supplier Xchange and Luckins supply direct-from-distributor prices, and projects open in Trimble Connect for sharing.

Limits: the published price applies in the United States only, and the page names no change order module.

TurboBid: a $1,395 sale-price license or $135 a month

Best for: small electrical shops on Windows that want to buy the software outright. Price: the electrical one-time purchase is $1,395, shown as a sale price against a regular $1,620 with no end date stated, with six months of updates and support and one month of TurboCloud added free for new customers. The monthly subscription is $135 plus a mandatory one-time setup fee of $350, refunded if the subscription later converts to a purchase. TurboCloud price sync is $99 a month, or averages $89 on six months and $79 on a year. The trial is 14 days, and no refunds are given (TurboBid one-time purchase, monthly subscription, checked 13 November 2026).

Strengths: wizards that calculate company overhead and employee labor burden, an assembly editor, Trade and Target material prices "updated every Monday", vendor price update files, change orders, service work pricing and a bundle with PlanSwift on-screen takeoff (turbobid.com, checked 13 November 2026).

Limits: a Mac needs Parallels at $99.99 and Windows 11 at $139.00, the price of the upgrade and support plan after the first six months was not read, and the pages state no number of users per license.

Estimating inside a project platform: Procore Estimating

Best for: contractors already on Procore who want takeoff and estimates connected to project financials. Price: quoted; Procore charges an annual fee by product based on Annual Construction Volume (procore.com/pricing, checked 13 November 2026).

Strengths: takeoff from 2D or 3D models with auto-mapping, auto-count and plan overlay, a customizable database of parts, assemblies, equipment and services, adjustable material prices, labor units and profit margins, and a customer-facing proposal (Procore Estimating, checked 13 November 2026).

Limits: the page describes a database for trades of all types and names no electrical labor library or price service.

Service quotes without takeoff: Joist

Best for: one or two electricians quoting service calls and small jobs from a phone. Price: Pro is $17 a month or $14.17 billed annually, and Elite $32 or $26.67. Run lists at $100 a month and is offered at $70 under an introductory 30% discount with no end date stated, or $58.33 billed annually. Trials last 14 days and need no card (joist.com/pricing, checked 13 November 2026).

Strengths: estimates with line items and photos that convert to invoices, online payments and homeowner financing, work orders from Pro, and change orders, business reports and license and insurance details on Elite. Run adds job organization and visit scheduling.

Limits: the page names no takeoff, labor units, assemblies or price service, so every line is priced by hand. General construction estimating tools are compared in the best construction estimating software roundup.

Estimates on HubSpot deals: FieldRanger

Best for: electrical firms that quote service calls and small projects after a site visit, with no drawings, and track the sale in HubSpot. Price: per technician, as shown on FieldRanger pricing; Start free trial gives 14 days and takes no card.

Strengths: with FieldRanger's estimating software, an estimate is built on the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and kept tied to the deal it belongs to. Estimates and agreements go out for signature through PandaDoc. A won deal becomes a job with its context carried over, and jobs are matched to electricians by certification and expertise. Job status changes can trigger HubSpot workflows; HubSpot's pricing page lists up to 50 workflows with restricted triggers and actions on Sales Hub Starter and up to 300 on Professional (hubspot.com/pricing/sales, checked November 2026). When the work order is complete, the invoice is generated from it; the HubSpot field service page traces the records.

Limits: FieldRanger does no takeoff from drawings; estimates are priced from its price book of services, parts and rates. Progress billing and retainage are not built. A rough-in spread over four days is four jobs, since multi-day jobs are not built. A contractor bidding from plans needs McCormick, Accubid Anywhere, Electrical Bid Manager, Estimation MEP or TurboBid alongside FieldRanger or instead of it.

Three-year cost for two estimators

The sample is a commercial electrical contractor invented for this calculation, with two estimators who bid from drawings. The three-year figures are sums of published prices, not quotes, and they count one license or subscription per estimator, since the TurboBid pages state no user terms.

Sample 36-month cost for two estimators, computed from vendor prices checked 13 November 2026
Tool and planBasis36 months
Trimble Estimation MEP Pro2 × $1,950 × 3$11,700
TurboBid monthly subscription2 × ($135 × 36 + $350)$10,420
TurboBid one-time purchase2 × $1,395 sale price, before the support plan after six months$2,790
TurboBid one-time purchase with yearly TurboCloud on each copy$2,790 + 2 × $79 × 36$8,478
Joist Elite, billed annually, one account$26.67 × 36; no takeoff$960.12
McCormick, Accubid Anywhere, Electrical Bid Manager, Procore EstimatingQuoteNot published
FieldRangerPer technicianSee [pricing](/pricing)

A TurboBid license bought outright is the lowest published figure for estimating with labor units, and keeping its prices synced through TurboCloud roughly triples that figure over three years. Estimation MEP costs $1,280 more than TurboBid's subscription over the period and adds AI takeoff in a browser, which matters to a shop on Macs. Joist costs less than either and carries no labor units at all.

Past-bid test for electrical estimating software

The test runs a bid already submitted through a trial or a demo account. TurboBid and Joist trials run 14 days, and Electrical Bid Manager offers a downloadable trial.

  1. Choose a submitted bid with its drawings, device counts, labor hours, material total and result.
  2. Take off three device types and one feeder run in the trial, by hand and with any auto-count.
  3. Apply the labor column used on the original bid and compare the hours line by line.
  4. Update material prices from the tool's price service or a supplier price file, and note which items carry no price.
  5. Price one change order from the original estimate's assemblies.
  6. Verify: confirm the trial's labor hours fall within the original bid's tolerance on all three device types, and the material list exports in a form the supply house accepts.

Frequently asked questions

What is the best electrical estimating software for a small contractor?

Trimble Estimation MEP Pro publishes $1,950 a user a year in the United States, with takeoff, standard labor units and managed prices. TurboBid sells an electrical license for $1,395 on sale (regular $1,620, no end date stated), or a $135 monthly subscription with a $350 setup fee. Prices were checked on 13 November 2026.

What is the best electrical estimating software for commercial bids?

McCormick, Trimble Accubid Anywhere and Electrical Bid Manager carry electrical assemblies, several labor columns and supplier pricing, and none publishes a price. McCormick names three levels of NECA labor units and a patented Auto Home Run feature.

What are labor units in electrical estimating?

Installed hours for one unit of an item, such as one receptacle or 100 feet of conduit. Estimating tools offer several columns for different job conditions: Electrical Bid Manager states three per item, and McCormick names three levels of NECA units.

Which electrical estimating software keeps material prices current?

Electrical Bid Manager uses Vision InfoSoft's EPIC service, which states it updates over 520,000 items a month. Accubid Anywhere and Estimation MEP use Trade Service pricing, and TurboBid updates Trade and Target prices every Monday.

Is there free electrical estimating software?

None of the tools checked is free. TurboBid and Joist offer 14-day trials and Electrical Bid Manager a downloadable trial; Joist names no takeoff or labor units.

Which electrical estimating software works with HubSpot?

FieldRanger builds estimates on the HubSpot deal or in FieldRanger tied to the deal, priced from its price book of services, parts and rates; it does no takeoff from drawings. The electrical estimating vendors' pages read on 13 November 2026 name no HubSpot connection.

Electrical estimating vendor pages and check dates

All pages below were checked on 13 November 2026, except HubSpot, checked in November 2026.

Over three years, two estimators cost $2,790 in TurboBid licenses at the sale price, $10,420 on its monthly plan and $11,700 on Estimation MEP, while the three commercial suites are priced by conversation. The best construction estimating software roundup covers general construction estimating, and the field service software comparisons list platforms that run the job once the bid is won. For firms that quote from site visits, FieldRanger offers 14 days free with no card, with plan prices on pricing.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo