Guide

Contractor Invoice Book:Duplicate and Triplicate Forms, Numbering, Required Contents, Retailer Prices and the Move to Digital Invoices

Contractor invoice book guide: duplicate and triplicate forms, numbering, what a field invoice must carry, prices checked November 2026 and going digital.

By Published Updated

11 min read

A contractor invoice book is a bound or padded set of carbonless invoice forms in two or three parts, filled in by hand at the job. The customer takes the original; the copies record the work, labor, materials, tax and total for the office. Quill listed stock books at $7.99 to $14.69 for 50 sets on November 13, 2026.

The invoice book fails in the office, not at the door. A technician writes Olympia's tax rate on a job in Rainier, and the customer is charged $6.56 too much on a $410 bill. A canary copy is left in a truck, and the invoice it records never reaches the accounting system. Stock books numbered only within each book can carry the same printed numbers, so two customers can hold invoice 0412. This guide is one of FieldRanger's invoicing and getting paid guides. It sets out the forms and their parts, retailer prices read on November 13, 2026, and numbering. It then covers what a field invoice must carry in Washington, sales tax by job site, and a sample month of 300 paper invoices in Olympia. A comparison with digital invoices, a checklist and the software record close it.

Four terms carry the page. A carbonless form is a set of sheets coated so that writing on the top sheet marks the sheets beneath without carbon paper. A part is one sheet of the set: a duplicate has two parts and a triplicate three. A stock book is printed with a generic layout and a space for a company stamp. A custom book is printed to order with the company's name, details and its own number series.

Contractor invoice books: forms, parts and copies

The parts of the set decide where each copy goes. A duplicate leaves the white original with the customer and keeps the canary copy in the book for the office. A triplicate adds a pink copy, which stays with the technician's file or goes to a second office function, such as job costing or warranty records.

The choice follows the paperwork after the job. A one-person business that enters every invoice from the book needs two parts. A company where the office bills from one copy and a manager reviews jobs from another needs three. A third copy that nobody files is paper the company pays for and does not use.

The layout differs between general and contractor forms. A general invoice book has a small grid for quantities and prices. A contractor's invoice has a larger description area for the work performed and lines for labor and materials, because a trade invoice explains what was done as well as what was sold. The fields of the invoice itself are set out in the invoice template.

Stock and custom invoice books with retailer prices

Quill, an office supply retailer, listed the books below on November 13, 2026. Staples, Zoro and On Time Supplies refused automated reads that day, so their prices are not included.

Contractor and invoice books listed by Quill (prices checked November 13, 2026)
ProductParts and sizeNumbering stated on the pagePricePer form
[TOPS Carbonless Invoice Book D8740](https://www.quill.com/tops-carbonless-invoice-book-2-part-50-sheets-book-d8740/cbs/55390924.html), 50 sets2 parts, white and canary; 8.38 × 6.69 inch detached form"Consecutively numbered within each book"$7.99$0.160
[Adams Contractor's Invoice Book TC8122](https://www.quill.com/adams-contractors-invoice-book-3-part-50-sets-book-tc8122/cbs/55390931.html), 50 sets3 parts, white, canary and pink; 10.84 × 8.38 inch detached formNot stated$14.69$0.294
[Adams 3-Part Carbonless Contractors Invoice Forms NC3822](https://www.quill.com/adams-3-part-carbonless-contractors-invoice-forms-85w-x-1144l-100-pack-abf-nc3822/cbs/55458738.html), 100 forms3 parts, white top copy with pink and yellow; 8.5 × 11.44 inch"Consecutively Numbered: No"$33.29$0.333
Custom Contractor Invoice, itemized, 500 forms3 parts, 1-color printing, 8.5 × 11 inchNot stated in the listing$499.99$1.00
Custom Contractor Invoice, itemized, 500 forms2 parts, 1-color printing, 8.5 × 11 inchNot stated in the listing$341.99$0.68

The custom forms were read from Quill's search listing for "contractor invoice" on the same day. The per-form figures are the listed price divided by the forms in the book or pack.

A custom form costs two to six times as much as a stock one. The difference buys the registered business name printed on every copy and, where the printer numbers the order, a series that belongs to the company.

Invoice numbering in a paper book

The number is the control a paper book has. It lets the office see that every set was used, voided or is still blank, and it gives the customer and the accounting system one reference for the bill.

Stock books number within themselves. The TOPS page states its sets are "consecutively numbered within each book", which leaves open whether two books share numbers, and the Adams NC3822 pack states it is not consecutively numbered at all. A company using stock books adds its own control:

  1. Each book is assigned to one technician and logged by its first and last number.
  2. A prefix is written on every set, such as the technician's initials, so two books with the same printed numbers produce different invoice numbers.
  3. A spoiled set is marked VOID across all parts and left in the book, not torn out and thrown away.
  4. At month end, the office checks each book's canary copies against the numbers issued, and every gap is either found, voided or written off.

A custom book printed in one continuous series removes the first two steps. The Quill listing does not state numbering for its custom forms, so the series is a question for the order.

Required contents of a field invoice in Washington

What a paper invoice must carry depends on the state. Washington's statutes set four requirements that touch a contractor's field invoice:

  1. The registered name. All "contracts, correspondence, cards, signs, posters, papers, and documents" that show a contractor's name or address "shall show the contractor's name or address as registered" (RCW 18.27.100, read November 13, 2026). An invoice book stamped with an unregistered trade name breaks that rule on every copy.
  2. Tax stated separately. The tax collected by the seller "must be stated separately from the selling price in any sales invoice or other instrument of sale", with listed exceptions (RCW 82.08.050, read November 13, 2026).
  3. Five years of records. Every taxpayer must keep, "for a period of five years, suitable records", and its "books, records, and invoices must be open for examination" by the Department of Revenue (RCW 82.32.070, read November 13, 2026). The canary copies are those records.
  4. The UBI number, when billing another business. The same section requires a business that contracts for work under the contractor registration chapter to "obtain and preserve a record of the unified business identifier account number" of the business doing the work, on penalty of up to $250. A subcontractor's invoice that carries its UBI number gives the general contractor that record.

The registration number itself is required on advertising under RCW 18.27.100(3), not on invoices, but printing it on a custom form costs nothing more. The rest of the invoice's contents, from payment terms to the line detail a general contractor expects, are set out in contractor invoice. A sole trader billing a business for services uses the independent contractor invoice instead.

Sales tax by job site: three Thurston County rates

A paper form leaves the tax rate to the technician, and in Washington the rate belongs to the job site. The Department of Revenue states that "sales of labor and services are coded to where they are performed" (Washington DOR, Determine the location of my sale, read November 13, 2026). Three places in one county carry three rates.

Washington combined sales tax rates for three Thurston County locations, quarter 4 of 2026 (DOR rate table)
LocationLocation codeLocal rateState rateCombined rate
Olympia34033.5%6.5%10.0%
Lacey34023.3%6.5%9.8%
Rainier34041.9%6.5%8.4%

Rates are from the DOR local sales and use tax rate table, effective October 1 through December 31, 2026, read November 13, 2026. DOR's address lookup gives the code for a specific address where a city boundary is in doubt.

On a $410 invoice, Olympia's rate gives $41.00 of tax, Lacey's $40.18 and Rainier's $34.44. A technician who writes 10.0 percent on every job overcharges a Lacey customer by $0.82 and a Rainier customer by $6.56, and the company reports the job under the wrong location code. A book can carry a printed rate card on its inside cover, but the rate changes by quarter and the card does not.

Sample month: 300 paper invoices in Olympia

The company is hypothetical: a six-technician plumbing contractor registered in Washington, based in Olympia, issuing 300 field invoices a month on triplicate books. Invoice counts, minutes per entry and the average invoice are sample inputs, labelled as such. The book price, the wage and the payment fees are sourced.

The office clerk's wage is $22.45 an hour, the median for general office clerks in the Olympia-Lacey-Tumwater metro in BLS 2025 wage data (O\*NET OnLine, Washington wages for 43-9061.00, read November 13, 2026). With 7.65 percent for Social Security and Medicare (IRS, Topic no. 751, read November 13, 2026) and a sample 15 percent for other employment costs, the loaded rate is $27.53.

Sample month of paper invoicing for the Olympia contractor (sourced prices and wage; sample counts and times)
LineBasisAmount
Invoice forms, stock triplicate300 forms ÷ 50 a book = 6 books × $14.69$88.14
Invoice forms, if custom triplicate300 forms × $1.00$299.99
Office entry from the canary copies300 × 4 minutes (sample) = 20.0 h × $27.53$550.60
Month, stock books$88.14 + $550.60$638.74
Month, custom books$299.99 + $550.60$850.59
Invoices at risk if 1 copy in 100 is lost (sample)3 invoices × $410 average (sample)$1,230.00

The forms are the small line. Entry time is six times the cost of stock books, and the risk line, at a loss rate of 1 in 100, is larger than both together. Payment adds its own cost wherever the bill is paid: Stripe lists 2.9% + 30¢ per successful domestic card transaction and 0.8% for ACH Direct Debit with a $5.00 cap (Stripe, Pricing, read November 13, 2026), which is $12.19 or $3.28 on the sample $410 invoice.

Paper invoice books and digital invoices compared

Contractor invoice book compared with a digital invoice generated from the job record
DimensionPaper invoice bookDigital invoice from the job record
Cost per invoice$0.16 to $1.00 a form, from the table aboveNo form cost; the software's subscription instead
Office entryEach copy keyed into accountingCreated in the system, synced to accounting
NumberingPrinted per book; gaps found by a monthly checkAssigned by the system in one series
Registered name and detailsStamped on stock books, printed on custom onesSet once in the template
Tax rate by job siteWritten by the technicianSet by the company's tax settings, if the system has them
Copy to the customerThe torn-out originalSent by email or text, with a payment link where offered
Record for five yearsCanary and pink copies in storageStored in the system and the accounting file
Works without signal or a charged phoneYesDepends on the app

A paper book still has a place. It works in a basement with no signal, it needs no training, and it is the fallback when a phone dies at the last job of the day. A company moving to digital invoices keeps one book per truck for that case, numbered in its own series so the office knows to enter it.

Contractor invoice book checklist

  1. Choose two parts or three by who files each copy after the job.
  2. Print or stamp the name exactly as registered with the state.
  3. Assign each book to one technician and log its first and last number.
  4. Add a prefix to stock book numbers, and void spoiled sets in place.
  5. Give technicians the tax rate for each location the company works in, updated every quarter.
  6. Carry the UBI number on invoices to other businesses.
  7. Keep canary copies for the state's retention period, five years in Washington.
  8. Verify at month end: every number in every book is entered, voided or accounted for, and the tax on each invoice matches the job site's rate.

Digital invoices from completed work orders in FieldRanger

FieldRanger replaces the book with the job record. Invoices from completed work orders generate the invoice from the finished work order, so the work, parts and labor recorded on the job become the bill without being rewritten. Digital work orders put the job details on the technician's phone, Materials tracking logs the parts used on each job, and Job-level time tracking logs the hours. Stripe takes payment in the field, and QuickBooks syncs invoices and payments, which removes the office entry line in the sample. The contractor invoicing software page describes the invoice record.

Recurring work can be charged automatically to a card on file, and progress billing is not built. Plans, and Start free trial for 14 days with no card, are on pricing.

Frequently asked questions

What is a contractor invoice book?

A bound or padded set of carbonless invoice forms, in two or three parts, that a contractor fills in by hand at the job. The original goes to the customer and the copies stay with the office and the file.

What is the difference between duplicate and triplicate invoice books?

A duplicate has two parts, an original for the customer and one copy for the office. A triplicate has three, adding a second copy for the technician's file or another office function.

Are contractor invoice books numbered?

Some are. Quill's listing for the TOPS D8740 book states it is consecutively numbered within each book, while the Adams NC3822 contractor forms are listed as not consecutively numbered. Custom books are printed with the company's own series.

How much does a contractor invoice book cost?

On November 13, 2026, Quill listed the TOPS 2-part D8740 at $7.99 for 50 sets and the Adams 3-part Contractor's Invoice Book TC8122 at $14.69 for 50 sets. Custom 3-part contractor invoices were $499.99 for 500.

What must a contractor invoice include in Washington?

The contractor's name as registered, sales tax stated separately from the price at the job site's rate, and, when billing another business, the UBI number that business must keep. Invoices are kept for five years.

Should a contractor switch from an invoice book to digital invoices?

The case rests on office entry time and lost copies, not on the cost of the forms. In the Olympia sample, keying 300 paper invoices takes 20 hours a month, against $88.14 of stock books.

Twenty hours of keying at $27.53 an hour cost the Olympia contractor $550.60 a month against $88.14 of paper, so the clerk's time, not the price of the books, decides the move to digital invoices.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo