Guide
Contractor Risk Management Software:Prequalification Scoring, OSHA Injury Logs, TRC and DART Rates, Experience Mods and Tool Prices
Contractor risk management software from the contractor's side: what prequalification platforms score, OSHA 300 logs, TRC and DART rates, EMR and tool prices.
Contractor risk management software is the category of platforms that hiring firms use to score contractors before work starts: Highwire, Avetta, ISNetworld and Veriforce rate safety, insurance, finance and capability. For the contractor being scored, the useful software is whatever keeps the records those platforms ask for: injury logs, hours worked, insurance and training.
The failure arrives as a questionnaire. A hospital or university facilities office sends a prequalification form asking for three years of OSHA 300 logs and an experience modification letter on the insurer's letterhead. The contractor has no logs, because nobody kept them, and has never seen its mod. One finger laceration from last spring turns into a recordable rate that looks alarming beside a large firm's. The form is marked incomplete, and the work goes to the next bidder. FieldRanger publishes this guide among its guides for service business owners. It starts with the two sides of the category and the items a platform scores. The OSHA records, the rate formulas and the experience modification come next. A sample three-year record for a Worcester electrical contractor, the contractor-side tools and prices, a checklist and the job record follow.
Four terms recur. A recordable case is a work-related injury or illness that meets OSHA's recording criteria, such as one treated with sutures rather than first aid. The TRC rate (total recordable case rate) is recordable cases per 200,000 hours worked. The DART rate counts only cases with days away from work, restricted work or job transfer, on the same base. The experience modification, or EMR, is the workers' compensation factor that compares a firm's actual losses with the losses expected for its class.
Contractor risk management software for hiring firms and for contractors
The software category belongs to the hiring firm. Highwire titles its own homepage "Contractor Risk Management Software". It names the risks it addresses as injuries, defaults, rework, cyber, environmental and diversity, and its prequalification covers company, finance, safety and insurance (highwire.com, checked November 13, 2026). At ISNetworld, contractors submit "health, safety, quality, risk, and regulatory information as requested by Hiring Clients", and a review team checks it (ISNetworld, FAQ, checked November 13, 2026). Veriforce lists six features for choosing such a platform: configurability, support, sourcing, training, ESG responsibility and network effects (Veriforce, 6 key features, checked November 13, 2026). Nine of these platforms are compared, with prices, in best contractor management software.
The contractor sits on the other side. A service contractor with 3 to 25 technicians does not buy Highwire; it is scored in Highwire. Its risk software is whatever produces the evidence: an injury log, an hours total, certificates, training records and job records. The records with expiry dates, such as certificates and licences, are the subject of contractor compliance management software. This guide covers the safety and loss records, which do not expire but accumulate.
Prequalification items and the records behind them
A prequalification questionnaire asks for a short list of numbers, and each number rests on a record the contractor either kept or did not. Howard University's subcontractor safety questionnaire is a published example. It requires OSHA Forms 300 and 300A for the "last 3 full calendar years", plus experience modification rates "printed on insurance-carrier letterhead". A submission without both is nonresponsive (Howard University, Subcontractor Safety Questionnaire, read November 13, 2026). The same form states: "If your company is not required to maintain OSHA logs, the information below must still be provided."
That sentence is the trap for a small contractor. The OSHA exemption for firms of ten or fewer employees removes the legal duty to keep logs; it does not remove a client's demand for the numbers. The firm that kept a log anyway answers in a day.
Benchmarks are published too. The Energy Facility Contractors Group sets an EMR benchmark of 1.0 or less, averaged over the past three years, and compares TRC and DART rates with the NAICS average (EFCOG Best Practice 271, Prequalification Safety Metrics, read November 13, 2026).
| Item asked for | Record behind it | Who produces it |
|---|---|---|
| Recordable cases, by year | OSHA Form 300 log | The contractor |
| Hours worked, by year | Payroll or time records for all employees | The contractor |
| TRC and DART rates | Computed from the log and the hours | The contractor |
| Experience modification | Rating worksheet or carrier letter | The rating bureau, through the carrier |
| Insurance limits | Certificate of insurance and endorsements | The agent or carrier |
| Safety programme and training | Written programme; training sign-in sheets | The contractor |
| Fatalities and serious injuries | OSHA Form 300, column G; reports to OSHA | The contractor |
OSHA injury and illness records: Forms 300, 300A and 301
Federal recordkeeping rules sit in 29 CFR Part 1904 (eCFR, 29 CFR Part 1904, read November 13, 2026). A company with "10 or fewer employees at all times during the last calendar year" does not need to keep the records unless OSHA or BLS asks in writing. Above that size, a company keeps them unless its establishment is in a partially exempt industry, and the appendix listing those industries contains no construction codes.
The rules that matter to a service contractor are short:
- Each recordable case goes on the OSHA 300 Log and the 301 Incident Report "within seven (7) calendar days" of learning of it.
- The 300A annual summary is posted "no later than February 1" of the following year and stays up "until April 30".
- The log, the summary and the 301 forms are kept "for five (5) years following the end of the calendar year that these records cover".
- An establishment with 20 to 249 employees in a designated industry, which includes NAICS 23 Construction, submits its 300A data electronically "by March 2" of the following year.
- A fatality is reported to OSHA within eight hours; an in-patient hospitalisation, an amputation or the loss of an eye within twenty-four hours. Those reporting duties apply to partially exempt employers too.
First aid is not recordable, and the line between first aid and medical treatment decides a large share of cases. The regulation's first-aid list includes butterfly bandages and Steri-Strips and states that "other wound closing devices such as sutures, staples, etc." are medical treatment. A cut closed with tape is first aid; the same cut closed with stitches is a recordable case.
TRC and DART rates from hours worked
The rate formula is printed on OSHA's own forms. The total recordable case rate is "Total number of injuries and illnesses X 200,000 ÷ Number of hours worked by all employees". The DART rate uses the entries in log columns H and I in place of the total (OSHA, Forms for Recording Work-Related Injuries and Illnesses, read November 13, 2026). The 200,000 figure "represents the number of hours 100 employees working 40 hours per week, 50 weeks per year would work".
The base makes small firms volatile. At 200,000 hours, one case moves the rate by 1.00. At 27,800 hours, the hours of a fourteen-person contractor, one case moves it by 7.19. A small firm's rate therefore swings from zero to several times an industry average on a single injury. A client comparing one year with the NAICS average sees the swing, not the safety practice. Asking the client to accept a three-year pooled rate, computed from total cases over total hours, is the standard remedy in the questionnaire's comment box.
The denominator is all hours worked by all employees, including office staff, and excludes paid leave. A firm that uses scheduled hours instead of recorded hours overstates or understates the base, and a reviewer who sees round numbers asks for the payroll source.
Experience modification and its eligibility threshold
The experience modification is computed by a rating bureau, not by the contractor or the insurer's sales agent. In states served by the National Council on Compensation Insurance, NCCI compares a firm's "claims history over the last three completed policy years to other businesses in the same classification" (Beacon Mutual, What is the experience modification factor, read November 13, 2026). Massachusetts uses its own bureau. A factor below 1.00 "results in a premium reduction", one above 1.00 raises premium, and "an experience modification factor of 1.00, or unity, does not change premium" (WCRIBMA, Experience Rating Plan, read November 13, 2026).
Not every firm has a factor. In Massachusetts a risk is eligible when the last year or two of the experience period "produced a premium of at least $11,000". Over more than two years, the test is an average annual premium of at least $5,500. A five-technician firm below that line has no modification to report. Its questionnaire line is answered with a carrier statement that the firm is not experience-rated.
The mod lags the injury. A claim enters the experience period of later policy years and stays for three of them. One bad year is paid for in premium long after the job is finished. The contractor cannot change the formula; it can show the client that the case was a single event with a documented correction.
Sample three-year safety record for a Worcester electrical contractor
The sample firm is a hypothetical fourteen-person electrical contractor in Worcester, Massachusetts: twelve or thirteen electricians and two office staff. The hours and cases are sample inputs; the formula is OSHA's. The table shows what the firm's questionnaire answers look like and why the pooled rate matters.
| Year | Hours worked, all employees | Recordable cases | DART cases | TRC rate | DART rate |
|---|---|---|---|---|---|
| 2024 | 27,800 (12 × 2,000 + 2 × 1,900) | 2 | 1 | 14.39 | 7.19 |
| 2025 | 28,400 (12 × 2,050 + 2 × 1,900) | 0 | 0 | 0.00 | 0.00 |
| 2026 | 29,800 (13 × 2,000 + 2 × 1,900) | 1 | 1 | 6.71 | 6.71 |
| Three years pooled | 86,000 | 3 | 2 | 6.98 | 4.65 |
The 2024 cases are a hand laceration closed with sutures (recordable, no lost time) and a back strain with three days of restricted duty (a DART case). The 2024 TRC rate is 2 × 200,000 ÷ 27,800, or 14.39. The pooled rate is 3 × 200,000 ÷ 86,000, or 6.98, less than half of the worst single year.
The firm's sample workers' compensation premium of $17,400 a year is above the Massachusetts eligibility line, so it has a modification. Its answers are complete: three logs, three 300A summaries, payroll hours for each year, a pooled rate and a carrier letter for the mod.
Contractor-side tools and published prices
The contractor's tools fall into three groups: network subscriptions a client requires, a safety app for inspections and incidents, and the job and time records.
| Tool | What the contractor records in it | Published price |
|---|---|---|
| ISNetworld contractor subscription | Safety, insurance and regulatory submissions for hiring clients | Annual subscription plus a one-time setup fee per country, based on the three-year average employee count; figures sit behind ISN's pricing page ([ISNetworld, FAQ](https://www.isnetworld.com/faq)) |
| Highwire contractor enrolment | Prequalification assessment for clients on Highwire | Not printed on the homepage; the site offers a pricing page, a demo and a free trial ([highwire.com](https://www.highwire.com/)) |
| Mitti (by SafetyCulture) | Inspections, checklists, issue reports | Free for teams up to 10; Premium $24 per seat per month billed annually or $29 monthly ([Mitti pricing](https://safetyculture.com/pricing/)) |
| Spreadsheet or paper OSHA forms | The 300 log, 300A and 301 | Free forms from OSHA ([OSHA forms package](https://www.osha.gov/sites/default/files/OSHA-RK-Forms-Package.pdf)) |
For the sample firm, fourteen seats exceed Mitti's free tier. Premium at $24 per seat per month is 14 × 24 × 12, or $4,032 a year billed annually, against $4,872 a year at the monthly rate. The OSHA log itself costs nothing to keep. The expensive part is the hours figure and the incident detail, which come from the time and job records.
Contractor risk records checklist
- An OSHA 300 log kept every year, including years when the firm had ten or fewer employees
- Each case entered within seven calendar days, with the first-aid or medical-treatment decision noted
- The 300A summary posted from February 1 to April 30, and submitted electronically by March 2 where the firm has 20 to 249 employees
- Hours worked for all employees taken from payroll or time records, by calendar year
- TRC and DART rates computed per year and pooled over three years
- The current experience modification worksheet, or the carrier's letter that the firm is not rated
- A short corrective-action note for each recordable case, filed with the 301 report
- Five years of logs, summaries and 301 forms kept on file
- Certificates and licences tracked by expiry date, as set out in contractor compliance management software
The same documents also answer a general contractor's prequalification for subcontract work, which is covered from the marketing side in contractor marketing.
Job, time and photo records in FieldRanger
FieldRanger is not a prequalification platform and does not keep OSHA logs, compute TRC or DART rates, or track experience modifications. It keeps the job records the evidence comes from. Job-level time tracking logs each clock-in and clock-out against its job. Geo-location time tracking records where the technician was at each clock event. Custom checklists give each job its checklist for quality and compliance. Photo documentation attaches before and after photos to the work order, and Digital signatures capture the customer's signature on site as proof of completion. Audit logs keep a record of user actions and data changes.
Those records answer the question a reviewer asks after an incident: who was on the job, when, and what the job required. The OSHA hours figure includes office staff and unassigned time, so it comes from payroll; FieldRanger doesn't run payroll. The work orders page sets out what a work order carries. Plans are on the pricing page; Start free trial runs for 14 days with no card.
Frequently asked questions
What is contractor risk management software?
Contractor risk management software is the category of platforms hiring firms use to prequalify and monitor contractors on safety, insurance, finance and capability, such as Highwire, Avetta, ISNetworld and Veriforce. The contractor being scored needs its own records to answer them: injury logs, hours, insurance certificates and training records.
Does a small contractor need an OSHA 300 log?
A company with ten or fewer employees at all times during the last calendar year is partially exempt from keeping the log under 29 CFR 1904.1. Prequalification questionnaires can still ask for the same injury and hours numbers, so a small firm that keeps the log anyway can answer them.
How is a TRC rate calculated?
The total recordable case rate is the number of recordable cases multiplied by 200,000 and divided by the hours worked by all employees in the year. The DART rate uses only cases with days away, restricted work or job transfer.
What EMR do clients require from contractors?
Requirements are set by each client. One published benchmark, from the Energy Facility Contractors Group, is a three-year average EMR of 1.0 or less, and Howard University's questionnaire asks for the EMR on insurer letterhead.
Why does one injury make a small contractor's rate so high?
The rate is scaled to 200,000 hours, the work of 100 full-time employees. A fourteen-person firm with 27,800 hours sees each recordable case add 7.19 to its rate, so a three-year pooled rate gives a fairer picture.
What is the difference between contractor risk management and compliance management software?
Compliance management tracks records with expiry dates, such as insurance certificates, licences and certifications. Risk management, from the contractor's side, covers the safety and loss records behind prequalification scores: injury logs, incident rates and the experience modification.
A risk platform reads a contractor through a handful of numbers, and a small firm's numbers move sharply on one injury. The defence is a log kept in the exempt years, an hours figure from payroll, and a pooled three-year rate ready before the questionnaire arrives.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo