Guide

Contractor Tracking Software:Time, Location, Job Progress and Subcontractor Records

Contractor tracking software records crew hours, clock-in locations, job status and subcontractor papers; FLSA time rules, a back-wage example and a checklist.

By Published Updated

12 min read

Contractor tracking software records what a contracting business's field workers are doing and where: hours worked against each job, the location of each clock-in and clock-out, the status of each job from scheduled to complete, and, for subcontractors, the tax and insurance documents due before payment. It replaces paper timesheets, whiteboards and status calls.

Tracking goes wrong in a contracting business in ways that cost money. A timesheet that records a day's start and finish, with no entries by job, cannot show the drive between job sites, which federal rules count as hours worked. A dispatcher who phones each crew for status learns about a finished job an hour after it finished, and the invoice waits. A subcontractor tracked hour by hour like an employee starts to look like one under the IRS control test. This guide is one of the fieldranger.ai guides for service business owners. It sets out the four records a tracker keeps, then the federal timekeeping and travel-time rules, location tracking and notice laws, job status and subcontractor records. It then compares contractor project management software, prices unrecorded drive time in back wages, and closes with selection steps, a checklist and the software question.

Four terms carry the argument. Hours worked is the time federal wage law requires an employer to pay, which includes some time away from the job site. A workweek is a fixed, recurring period of 168 hours, seven consecutive 24-hour periods. Job status is the stage a job has reached: scheduled, started, complete or invoiced. A subcontractor is a separate business hired to perform part of the work, paid against an invoice rather than through payroll.

Contractor tracking software and the four records it keeps

Contractor tracking software is judged by the records it produces, because each record answers a question someone else will ask: a payroll clerk, a dispatcher, an auditor or the IRS.

The four records contractor tracking software keeps
RecordQuestion it answersRule or reader behind it
Time entries by jobHours each worker spent on each job, by day and by workweekFLSA recordkeeping and overtime
Clock-in and clock-out locationWhether the hours were worked at the job siteThe office; state notice laws where they apply
Job statusWhich jobs are scheduled, started, complete and invoicedThe dispatcher and the billing cycle
Subcontractor documentsWhether a W-9 and a certificate of insurance are on file before paymentIRS information returns; contract terms

The first two records concern employees and the last concerns businesses. Software that blurs the line, tracking a subcontractor's hours and location the way it tracks a technician's, creates the classification problem described later in this guide.

Time tracking for contractors under the FLSA

The Department of Labor's recordkeeping rules set the minimum content of a time record for non-exempt workers. Among the required items are the hours worked each day, the total hours worked each workweek, and the time and day of week when the employee's workweek begins. Payroll records are kept for at least three years, and the records on which wage computations are based, such as time cards, for two years. Time clocks are not required: employers may use any timekeeping method they choose, provided the records are complete and accurate (DOL Fact Sheet 21, revised July 2008).

Overtime is calculated on the workweek. Covered non-exempt employees receive at least one and one-half times their regular rate for hours over 40 in a workweek. Averaging hours over two or more weeks is not permitted (DOL, Overtime pay, checked November 12, 2026). A technician who works 46 hours one week and 34 the next is owed six hours of overtime for the first week, even though the fortnight totals 80.

The consequence for software is that the day and the week must both be recoverable from the record. A tracker that stores only a weekly total cannot show the daily hours the rule requires, and one that stores days without a fixed workweek start cannot compute overtime correctly.

Travel time between job sites

Federal regulations treat time spent "in travel as part of his principal activity, such as travel from job site to job site" as hours worked (29 CFR 785.38). The same section counts travel from a designated meeting place to the work location, and treats travel home after the last job as ordinary commuting.

Job-level time entries make this rule visible. A technician with three calls in a day produces three job entries, and the gaps between them are the drive. The gaps are not job time and are not billed to a customer, but they are hours worked and belong in the day's total for pay. A tracker that stops the clock at each job's completion, and a payroll process that adds up only job entries, leaves the drive unpaid.

The fix lives in the payroll rule rather than the job record. The day's paid hours run from the first clock-in to the last clock-out, less unpaid breaks, and the job entries inside that span show how the day divided between customers.

Location tracking: clock-in stamps and vehicle GPS

Location tracking takes two forms, and they answer different questions. A location stamp records where the worker's phone was at the moment of clock-in and clock-out, and answers whether the hours started and ended at the job site. Vehicle GPS records where a company vehicle is throughout the day, and answers where the truck went between jobs, how long it idled and whether it left the service area.

The stamp is the lighter of the two. It records two points per job rather than a trail, and a stamp that matches the job address needs no review. A stamp recorded miles from the job address is the exception worth a call. Vehicle GPS is tied to a company asset, which makes it the record for mileage logs and for questions about a vehicle's use.

Notice rules come from the states. New York's rule applies to an employer with a place of business in the state that monitors employees' telephone, email or internet use. The employer gives prior written notice upon hiring, the employee acknowledges it in writing or electronically, and the notice is posted in a conspicuous place. The maximum civil penalties are $500 for a first offense, $1,000 for a second and $3,000 for each subsequent offense (N.Y. Civil Rights Law § 52-c). The New York statute names communications and internet use rather than location, and other states write their own rules. A written notice given at hire, stating that location is recorded at clock-in and clock-out and that vehicles report their position during working hours, puts the same information in the employee's hands wherever the business operates.

Job progress tracking from scheduled to invoiced

Job progress tracking moves each job through four states, and each state change has an owner. The dispatcher schedules the job. The technician starts it on arrival and completes it on departure. The office invoices it. Every change made without a phone call is a call the dispatcher does not have to make.

The interval between complete and invoiced is cash. A job finished on Tuesday and invoiced the following Monday has lent the customer the price for six days, and a status board that shows complete-but-not-invoiced jobs makes that list visible every morning. The job tracking page shows how status moves from the technician's phone to the office.

Status also joins the field to the sales side. A job that began as a lead from contractor marketing ends as a completed and invoiced record. The cost of winning it can be compared with its revenue only if both sit on the same customer record.

Subcontractor and independent contractor records

A subcontractor is tracked by documents and deliverables, not by hours. Before payment, the business collects Form W-9, which a payee uses to provide its correct taxpayer identification number to the person required to file an information return (IRS, About Form W-9, reviewed June 27, 2026). Form 1099-NEC follows at year end: the reporting threshold is $2,000 for payments made in 2026, and $600 for payments made before 2026 (IRS, Form 1099 filing, reviewed July 10, 2026). A certificate of insurance, with its expiry date, is the third document, and the contract sets the limits it must show.

The classification rule sets the limit on tracking. The IRS looks at the entire relationship and the extent of the right to direct and control the worker. It groups the evidence into behavioral control (whether the company controls what the worker does and how), financial control and the type of relationship (IRS, Independent contractor or employee, reviewed May 19, 2026). Requiring a subcontractor to clock in at the business's chosen times, and tracking the subcontractor's location through the day, is evidence of behavioral control. Recording the subcontractor's job status, completion photos and invoice records the result of the work without directing how it is done.

Contractor project management software compared with field service tracking

Contractor project management software and field service tracking both record time and progress, but they are built around different units of work. The choice follows the jobs a business runs.

Contractor project management software and field service tracking compared
DimensionContractor project management softwareField service tracking
Unit of workA project lasting weeks or months, with phasesJobs lasting hours, several per worker per day
SchedulePhases, dependencies and milestonesA daily calendar and routes
Time recordsHours by cost code across the projectHours by job, with location stamps
DocumentsDrawings, change orders and submittalsWork orders, checklists, photos and signatures
BillingProgress billing against a schedule of valuesAn invoice for each completed job

A remodeler running six-week kitchen jobs fits contractor project software: its questions are about phase sequence, budget against cost code and change orders. An HVAC or electrical service company running five calls per technician per day fits field service tracking: its questions are about routes, status and same-day invoicing. A business that does both, such as an electrical contractor with service and construction departments, may need both: field service software for the service side and project software for construction.

Unrecorded drive time: a sample back-wage calculation

The table prices the drive-time gap described above for a hypothetical crew. The wage, the overtime multiplier, the limitation periods and the damages rule are published. The crew size, the unrecorded minutes and the 40-hour baseline are sample inputs, so the result is sample data rather than an estimate of any real liability.

Sample back wages from unrecorded travel between job sites (sources dated in the table)
LineFigureBasis
Technicians8Sample input
Regular rate$29.33 an hourMay 2025 median for HVAC mechanics and installers ([BLS](https://www.bls.gov/ooh/installation-maintenance-and-repair/heating-air-conditioning-and-refrigeration-mechanics-and-installers.htm))
Unrecorded travel25 minutes a day, 5 days a weekSample input
Unrecorded hours per technician2.08 a week125 minutes ÷ 60
Recorded hours40 a weekSample input, so every unrecorded hour is overtime
Overtime rate$44.00 an hour1.5 × $29.33 ([DOL](https://www.dol.gov/agencies/whd/overtime))
Back wages per technician$91.66 a week2.08 × $44.00, unrounded
Back wages for the crew$733.25 a week8 technicians
One year$36,662.5050 working weeks
Two-year limitation period$73,325.0029 U.S.C. § 255, three years for a willful violation ([LII](https://www.law.cornell.edu/uscode/text/29/255))
With liquidated damages$146,650.00An additional equal amount under 29 U.S.C. § 216(b) ([LII](https://www.law.cornell.edu/uscode/text/29/216))

The figure grows from a small daily gap. Twenty-five minutes a day is less than the drive between two suburban calls, and across eight technicians, two years and the liquidated damages rule it reaches $146,650. A willful violation extends the period to three years, which raises the total to $219,975. The record that prevents it is the one described under travel time: paid hours from first clock-in to last clock-out, with job entries inside.

Selection steps for contractor tracking software

Contractor tracking software is tested on one real crew for one real week before it is rolled out. The steps run in this order, and the last one proves the setup works.

  1. Define the workweek's start day and time in writing, and enter it in the software.
  2. Run one crew on the software for a full workweek, with every job assigned in it.
  3. Confirm that each clock-in and clock-out stores the time and the location against a job.
  4. Confirm that job status changes reach the office without a phone call.
  5. Confirm that the report or export carries daily totals and workweek totals, including the time between job entries.
  6. Confirm where subcontractor W-9s and certificate expiry dates are kept: in the tracker or in a system alongside it.
  7. Verify the week: for one technician, the daily totals in the tracker, the hours paid in payroll and the job addresses on the schedule agree, and any clock-in stamped away from its job address has an explanation.

The contractor software page covers the wider selection, from estimating to billing, with published vendor prices.

Contractor tracking setup checklist

  • Workweek start day and time defined and entered
  • Paid hours set from first clock-in to last clock-out, less unpaid breaks
  • Job entries recorded for every job, with location stamps at clock-in and clock-out
  • Written notice of location recording given at hire and acknowledged
  • Payroll records kept three years and time records two years
  • Job status changed by the technician on site, not by the office after a call
  • Complete-but-not-invoiced jobs reviewed every morning
  • W-9 on file before the first payment to each subcontractor
  • Certificates of insurance with expiry dates tracked for every subcontractor
  • Subcontractors tracked by job status and deliverables, not by hours and location

Crew time, location and job status in FieldRanger

FieldRanger keeps the first three records on the same HubSpot records as the sales pipeline. Clock-ins and clock-outs record where the technician was, so hours match job sites, and time is logged against each job. The technician starts and completes a job with one tap, job status updates in real time for dispatchers, and the HubSpot deal record shows the job's status. Vehicle tracking shows the real-time GPS location of every vehicle on a live map, with alerts for speeding, geofence exits and idle time. The invoice is generated from the completed work order, revenue reports show job revenue and margin by customer or service type, and any report downloads as CSV or Excel for the payroll process. The GPS time tracking page shows how a location-stamped clock-in is recorded, and the job tracking page shows the status path from scheduled to complete.

Frequently asked questions

What is contractor tracking software?

Software that records what a contracting business's field workers are doing: hours by job, the location of each clock-in and clock-out, job status from scheduled to invoiced, and, for subcontractors, the W-9 and insurance documents due before payment.

Do contractors have to pay employees for drive time between job sites?

Yes, for non-exempt employees. Federal regulations at 29 CFR 785.38 count travel from job site to job site as part of the principal activity as hours worked. Travel home after the last job is ordinary commuting.

How long must time records be kept?

The Department of Labor requires payroll records to be kept for at least three years, and the records on which wage computations are based, such as time cards, for two years.

Is it legal to track employees with GPS?

Employee monitoring is governed by state law. New York requires written notice at hire, acknowledged by the employee, for monitoring of telephone, email and internet use, with civil penalties up to $3,000 for repeat offenses. A written notice at hire that names location tracking gives employees the same information in any state.

What is the difference between contractor tracking software and contractor project management software?

Contractor project management software is built around projects lasting weeks or months, with phases, cost codes, change orders and progress billing. Contractor tracking for field service is built around short jobs, several per worker per day, with routes, location stamps, job status and an invoice per job.

Can a business track an independent contractor's hours and location?

It can record a contractor's job status and deliverables, but requiring set clock-in times and tracking location through the day is evidence of behavioral control under the IRS test, which points toward employee status.

When is a Form 1099-NEC required for a subcontractor?

For payments made in 2026 the reporting threshold is $2,000, and for payments made before 2026 it was $600, according to the IRS. The business collects Form W-9 from the subcontractor before the first payment.

A tracker earns its cost on the day someone asks for 24 months of time cards, a technician disputes a paycheck or a customer disputes an invoice; in each case the answer is either in the system or reconstructed from memory. The guides for service business owners cover the other records a contracting business keeps, and the job tracking page shows the status record in detail. Plans are on pricing, and Start free trial runs 14 days without a card, enough for the one-crew test week described above.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo