Guide

How to Grow an HVAC Business:Seasonal Capacity, Technician Hiring, EPA 608 Certification, Maintenance Agreements and a Second-Truck Year

How to grow an HVAC business: seasonal capacity, technician hiring at a loaded wage, EPA 608 certification, maintenance agreements and a costed second truck.

By Published Updated

10 min read

The answer to how to grow an HVAC business is a sequence: technician hours first, priced at the loaded wage; EPA Section 608 certification confirmed before a new hire connects gauges; a base of maintenance agreements that fills the spring and fall; and a second truck costed season by season against the work available to it, before it is bought.

HVAC demand arrives in two peaks with two quieter seasons between them, and a company sized for either one is wrong for the other. Sized for July, it carries idle technicians in April; sized for April, it turns away calls in the first heat wave. The BLS notes that HVAC technicians may work overtime or irregular schedules during peak heating and cooling seasons (BLS Occupational Outlook Handbook, modified October 29, 2026). FieldRanger makes HVAC software that runs inside HubSpot, and this guide is one of its running and managing guides. It covers seasonal capacity, hiring and the loaded wage, EPA 608 certification for new hires, the maintenance agreement base, a second truck costed by season, the measures of a successful HVAC business, capacity errors, a pre-hire checklist and the dispatch record.

Four terms anchor the arithmetic. A shoulder season is the spring or fall stretch between the cooling and heating peaks. Billable share is the fraction of a technician's paid hours spent on work a customer pays for. The agreement base is the number of maintenance agreements in force, each a set of visits already sold. Loaded labor cost is the wage divided by the wage share of total compensation, so that it includes benefits and payroll taxes.

Seasonal demand and HVAC capacity

Capacity in an HVAC company is technician-hours by season, not a headcount. A technician paid for 2,080 hours a year has 520 in each three-month season; the peaks ask for more than that and the shoulders for less. ENERGY STAR advises homeowners that it is best to check the cooling system in the spring and the heating system in the fall, because contractors get busy once summer and winter come (ENERGY STAR, Maintenance Checklist, checked November 12, 2026), which puts the planned work in exactly the seasons the emergency work leaves open.

Growth adds hours in one of three ways. Overtime adds them in the peaks at a premium rate. A new technician adds 520 hours to every season, the quiet ones included. Maintenance agreements move work out of the peaks and into the shoulders, where the new technician's hours would otherwise go unsold. The order of this guide follows the order of the decision: whether a second technician's shoulder hours can be filled is answered before the hire, by the agreement base.

HVAC technician hiring: labor market and loaded wage

The labor market for HVAC technicians is growing. BLS counts about 440,900 jobs for heating, air conditioning and refrigeration mechanics and installers in 2025, projects employment growth of 11 percent from 2025 to 2035, and projects about 40,600 openings a year. The median wage was $29.33 an hour, or $61,010 a year, in May 2025; the lowest 10 percent earned less than $40,050 and the highest 10 percent more than $95,210 (BLS Occupational Outlook Handbook, modified October 29, 2026).

The hire is costed at the loaded rate. Wages and salaries were 70.0 percent of private-industry compensation in June 2026 (BLS Employer Costs for Employee Compensation, released September 9, 2026), so the median technician's loaded cost is $29.33 ÷ 0.700, or $41.90 an hour, and $87,152.00 for 2,080 paid hours. Across the BLS percentile range, the loaded hourly cost runs from $27.50 to $65.39, and the offer that wins a candidate sits somewhere in that band.

Training sets the lead time. BLS describes postsecondary HVAC programs of 6 months to 2 years and apprenticeships that last several years, and notes that some states and localities require HVAC technicians to be licensed (BLS). A company that starts recruiting when the July board is full is hiring for the next July. The search starts in the shoulder before a peak, so a new technician learns the service area on agreement visits instead of on no-cooling calls at four in the afternoon.

EPA Section 608 certification for new technicians

A technician who opens a refrigerant circuit must hold EPA Section 608 certification, and the hire's certificate decides which calls the dispatcher can send that technician to alone. Type I covers small appliances; Type II covers high- and very high-pressure appliances other than small appliances and motor vehicle air conditioners; Type III covers low-pressure appliances; Universal covers all types. Certification is earned by passing a test administered by an EPA-approved certifying organization, and the credentials do not expire (EPA, Section 608 Technician Certification Requirements, updated July 15, 2026).

Two consequences follow for a growing company. A certificate earned years ago is still valid, so the check at hiring is the card itself and its type, recorded on the technician's file. An uncertified hire, such as an apprentice, is exempt only while closely and continually supervised by a certified technician, so the apprentice is scheduled with a certified technician on every job that opens the circuit: two technicians and one set of billable hours. The certification and licensing steps for the business itself are covered in how to start an HVAC business.

Maintenance agreement base as shoulder-season work

A maintenance agreement sells shoulder-season hours in advance. Two visits a year, spring and fall, put each agreement's work in the seasons ENERGY STAR names, and the visit contents follow the HVAC maintenance checklist. For a company planning growth, the agreement base is a capacity number before it is a revenue number: it states how many shoulder hours are already sold.

The arithmetic is short. At a sample 1.5 hours per visit including travel, 180 agreements put 270 hours of work into each shoulder season, a little over half of one technician's 520. An agreement base sized for a new technician's shoulder hours is therefore built before the hire, not after, and the rest of the shoulder fills with repair and replacement calls. The price of an agreement and the way it is advertised are marketing questions, covered in the guide on how to market an HVAC business.

Second HVAC truck: a costed year by season

The year below is a sample for a hypothetical company adding a second truck with one technician at the median wage. The wage, compensation ratio, mileage rate and insurance figures are published. Miles, tools, hours of work, agreement count and prices are sample inputs.

Insurance uses the figures Insureon publishes for HVAC businesses, $2,189 a year for workers' compensation and $495 for tools and equipment (Insureon, HVAC insurance cost, updated August 24, 2026), treated in the sample as the added premium. The vehicle is costed at the IRS business rate of 76 cents a mile from July 1, 2026 (IRS standard mileage rates, updated July 28, 2026), which the sample uses in place of separate fuel, repair, depreciation and auto insurance lines.

Sample annual cost of a second HVAC truck (published rates and sample inputs)
LineCalculationAmount
Technician, loaded2,080 hours × $41.90$87,152.00
Vehicle22,000 sample miles × $0.76$16,720.00
Insurance$2,189 workers' compensation + $495 tools and equipment$2,684.00
Recovery machine, gauges, tools and van stockSample$9,000.00
YearSum$115,556.00
Each seasonYear ÷ 4$28,889.00

Revenue in the next table prices repair and replacement hours at a sample $150 an hour and each agreement visit at a sample $110, half of a $220 two-visit agreement.

Sample second-truck year by season, 520 paid hours a season (work hours, agreement counts and prices are sample inputs)
SeasonBillable hours: repair and replacement + agreement visitsBillable shareResult after the season's $28,889
Winter peak, December to February380 + 0 = 38073.1%+$28,111
Spring shoulder, March to May120 + 270 (180 visits) = 39075.0%+$8,911
Summer peak, June to August440 + 0 = 44084.6%+$37,111
Fall shoulder, September to November110 + 270 (180 visits) = 38073.1%+$7,411
Year1,59076.4%+$81,544

Without the agreements, the spring and fall shoulders hold 120 and 110 billable hours, a billable share of 23.1 and 21.2 percent, and each season loses money: $10,889 in spring and $12,389 in fall. The year still ends positive, at $41,944, but $39,600 of the second truck's $81,544 comes from the 360 agreement visits. The peaks pay for the truck in this sample, and the agreement base decides whether the shoulders lose money, so a company weighing a second truck counts its agreements before it counts its July calls.

Successful HVAC business measures from job records

A successful HVAC business, in operating terms, is one whose records answer four questions on any date. Billable share per technician by season, from time logged against jobs, shows whether capacity matches demand. The agreement base, with visits completed against visits sold, shows whether the shoulder hours are filled and whether the company is delivering what it has already been paid for. The return-visit rate, the share of jobs needing a second trip for the same problem, shows whether growth is thinning the quality of the work. Revenue and margin by service type show whether replacement, repair and agreement work each pay for the hours they take.

No published benchmark for these four measures is cited here, and none is needed to use them: each is read as a trend against the company's own previous year.

Capacity errors in a growing HVAC company

Capacity errors by symptom, cause and fix
SymptomCauseFix
Calls turned away in the first heat waveRecruiting started when the board was already fullRecruit in the shoulder season before the peak the hire is for
Agreement visits pushed into JuneAgreements sold beyond the shoulder hours availableCap the agreement base at the shoulder hours of technicians on the payroll
An apprentice on the payroll and little added billingNo certified technician free to supervise refrigerant workHire apprentices against certified technicians' schedules
A second truck idle in AprilThe truck was costed against peak demand onlyCost it by season, with the agreement base counted
Margin falling as revenue risesPrices set before a wage or mileage changeReprice when the loaded wage or the IRS rate changes

Checklist before a second HVAC technician starts

  1. Measure each technician's billable share by season for the last twelve months.
  2. Count agreements in force and the shoulder hours their visits will take.
  3. Cost the second truck by season with current wage, mileage and insurance figures.
  4. Open recruiting in the shoulder season before the peak the hire is meant for.
  5. Record the new technician's Section 608 certification type from the card.
  6. Pair any uncertified hire with a certified technician on every refrigerant job.
  7. Split the territory between the two trucks so neither crosses the other's area on an ordinary day.
  8. Place the agreement visits already sold on the calendar before selling more.
  9. Verify after the first shoulder season: the second truck's billable share against the 75 percent in the sample.

Technician capacity, certification and agreement visits in FieldRanger

The capacity plan runs on the dispatch board. In FieldRanger, skill-based assignment matches jobs to technicians by certification and expertise, which is where a Section 608 type, or an apprentice's need for a certified partner, is applied to each job. Every technician appears side by side with availability and current assignments, capacity and workload balancing prevent an overbooked week, and conflict detection warns of double-bookings. Recurring job templates hold the spring and fall agreement visits, and arrival windows are set and tracked for on-time performance. The scheduling and dispatch page shows the board.

Technicians clock in and out with time logged against each job, which produces the billable share by season. Revenue reports show job revenue and margin by customer or service type, the invoice is generated from the completed work order, and a won HubSpot deal becomes a job with its context carried over, so a replacement sold in the fall reaches the board with its estimate behind it. Pricing lists the plans; Start free trial runs 14 days without a card.

Frequently asked questions

How to grow an HVAC business?

Add technician hours in a sequence: cost the hire at the loaded wage, confirm EPA 608 certification, build a maintenance agreement base that fills spring and fall, and cost a second truck season by season before buying it.

How to grow an HVAC business in the spring and fall?

Sell maintenance agreements whose two visits fall in the shoulder seasons. In the sample, 180 agreements put 270 hours into each shoulder and turned a $10,889 spring loss into an $8,911 gain.

When should an HVAC company hire another technician?

When peak demand already exceeds the current technicians' hours and the agreement base can fill a new technician's shoulder hours. Recruiting starts in the shoulder season before the peak the hire is for.

Can an uncertified apprentice handle refrigerant?

Only while closely and continually supervised by a certified technician, under EPA's Section 608 rules. The apprentice is scheduled with a certified technician on each job that opens the refrigerant circuit.

What makes a successful HVAC business?

In operating terms, records that show billable share by season, agreement visits delivered against visits sold, the return-visit rate, and revenue and margin by service type, each improving against the previous year.

Of the $81,544 the second truck clears after its own cost, $39,600 was sold as 360 agreement visits before its technician's first day.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo