Guide
How to Start a Mold Remediation Business:Texas Licensing, IICRC S520, EPA Containment Rules, Pollution Insurance, Equipment and a Priced Sample Job
How to start a mold remediation business: Texas TDLR licensing, the IICRC S520 standard, EPA containment, pollution insurance, equipment and a sample job.
How to start a mold remediation business: complete accredited training, obtain the state license where one is required, such as Texas's contractor and company licenses, carry general liability and pollution coverage, buy containment, HEPA and drying equipment, work to the IICRC S520 standard and EPA guidance, and price each job from labor, materials and disposal.
Mold remediation is regulated where it is least visible. A remediator who also tests the air and writes the scope for the same Texas project has broken a licensing rule before the first bag of drywall leaves the house. A general liability policy with a pollution exclusion turns a cross-contamination claim into the owner's personal debt. A crew working in half-face respirators without a fit test is an OSHA citation in waiting. FieldRanger makes property restoration software that runs inside HubSpot, and this guide is one of the starting a business guides. It covers the services and the assessor's separate role first, then Texas licensing and the project sequence the state requires. The IICRC standard, EPA containment, OSHA respirator rules, insurance, equipment and start-up costs follow, with a priced sample job, first customers and a checklist at the end.
Three terms are used in a fixed sense. Mold assessment is the inspection, sampling and evaluation of mold in a building, and the writing of the remediation protocol. Mold remediation is, in the Texas definition, "the removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, of mold or mold-contaminated matter" (TDLR). Containment is the barrier, built from polyethylene sheeting and held under negative air pressure on larger jobs, that keeps spores and dust inside the work area while the material is removed.
Mold remediation business: services, customers and the assessor's separate role
A mold remediation business removes contaminated building material, cleans what stays, and leaves the area dry and ready for rebuild. Its jobs come from three directions: homeowners who find mold after a leak, property managers and landlords with recurring units, and commercial owners whose building has a moisture problem. Water damage is one source of the work, and a remediation crew can sit inside a water restoration company; that business is the subject of the guide to business water damage restoration.
The assessor is a separate business in Texas. The Texas Department of Licensing and Regulation states that "you are not allowed to conduct both mold assessment and mold remediation activities on the same project", with an exception for school district projects (TDLR, mold assessors and remediators FAQ, checked November 2026). A remediation company therefore works from another firm's protocol and is cleared by another firm's post-remediation assessment. Assessment consultants are, by the same rule, one of a remediation company's natural referral sources.
Texas mold remediation licensing: TDLR license types, fees and qualifications
Texas licenses mold work under Chapter 1958 of the Occupations Code and the rules in Title 16, Chapter 78 of the Texas Administrative Code, and TDLR counted 5,646 licensees in fiscal year 2025 (TDLR, Mold Assessors and Remediators at a Glance, December 2025). The same sheet lists the license types and fees.
| License | Fee, initial or renewal | Who needs it |
|---|---|---|
| Mold remediation worker registration | $50 | Each worker on a remediation crew |
| Mold remediation contractor license | $450 | The individual who plans and supervises remediation |
| Mold remediation company license | $850 | The business that contracts for remediation |
| Mold assessment technician | $150 | Assessment side; not held by the remediator on the same project |
| Mold assessment consultant | $500 | Assessment side; writes the protocol |
| Mold assessment company | $850 | Assessment side |
The contractor license has five requirements beyond the fee. The applicant must be at least 18, submit a mold remediation contractor course certificate from a TDLR-accredited training provider, pass a background check and the state examination, and show one of four combinations of education and experience: a natural or physical science degree with one year of hands-on experience in an allied field or as a general contractor, 60 college credit hours with three years, a high school diploma or GED with five years, or certification as an industrial hygienist, professional engineer or registered sanitarian with one year (TDLR, how to apply for a mold remediation contractor license, checked November 2026).
The company license has three. It "must have at least one licensed mold remediation contractor" as its responsible person, must "maintain an office in Texas" with a physical address, and must carry commercial general liability insurance of "not less than $1 million per occurrence", or show a net worth of at least $1 million to self-insure (TDLR, apply for a mold assessment or remediation company license, checked November 2026). Small projects have an exemption for unlicensed people: visible mold of less than 25 contiguous square feet. A licensed contractor working such a project "is not exempt from the law and rules", according to the FAQ.
The Texas project sequence: protocol, work plan, notification and certificate
Every licensed Texas project runs in the same order, set out on TDLR's at-a-glance sheet.
- Protocol. The assessment consultant prepares a mold remediation protocol for the project and gives it to the client at least one calendar day before remediation begins. It specifies the rooms, the quantities of material to remove or clean, the protective equipment, the containment, the methods and the clearance criteria.
- Work plan. The remediation contractor writes a work plan that meets the protocol and gives it to the client at least one day before preparation begins.
- Consumer information. Both licensees give the client and the property owner the Consumer Mold Information Sheet before any mold-related activity begins.
- Notification. The license holder notifies TDLR at least five days before the project begins. No notice is required for mold covering less than 25 contiguous square feet, and the listed initial notification fee for an owner-occupied residential dwelling is $25.
- Remediation and clearance. The crew works to the work plan, and the consultant conducts the post-remediation assessment.
- Certificate. A certificate of mold remediation, a Texas Department of Insurance form, goes to the property owner no later than 10 days after completion. An owner who sells the property must give the buyer copies of the certificates issued in the previous five years.
The sequence is the reason a remediation job takes a week of calendar time for two days of work. A schedule that books the crew for Monday on a Friday call has already missed the notification window.
IICRC S520 and the AMRT certification
Texas sets the legal requirements; the industry standard sets the method. ANSI/IICRC S520, the Standard for Professional Mold Remediation, is in its 2024 fourth edition, and the IICRC states that it "describes the procedures to be followed and the precautions to be taken" for mold remediation in residential, commercial and institutional buildings and their systems and contents (IICRC, S520, checked November 2026). Buying the standard and writing the company's procedures from it is a start-up task, not a later one.
The matching certification is the IICRC's Applied Microbial Remediation Technician (AMRT), which "covers mold and sewage remediation techniques" and requires the Water Restoration Technician (WRT) certification first (IICRC, AMRT, checked November 2026). The Texas license and the IICRC certification are separate: the state requires its accredited course and exam, and the AMRT is the trade's own credential, which Texas does not require.
Business mold remediation in commercial buildings: EPA size classes and containment
EPA's guide to mold remediation in schools and commercial buildings sets containment by the size of the affected area. "Limited containment is generally recommended for areas involving between 10 and 100 square feet" of mold contamination, and "full containment is recommended for the cleanup of mold-contaminated surface areas greater than 100 ft2" (EPA, Mold Remediation in Schools and Commercial Buildings, Chapter 3, updated April 29, 2026).
Protective equipment scales the same way in the guide. The minimum for any mold work is an N-95 respirator, gloves and eye protection. Limited protection adds a half-face or full-face air-purifying respirator with HEPA cartridges and disposable overalls. Full protection is a powered air-purifying respirator and a breathable full-body suit. A business mold remediation bid for a commercial client states the size class, the containment and the protection level, because each one changes the labor and materials on the job. Drying comes first: EPA states that "It is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth" (EPA, how do I get rid of mold, updated September 8, 2026).
OSHA respiratory protection for remediation crews
A respirator on a remediation crew brings a written program with it. Under 29 CFR 1910.134, an employer whose workers must wear respirators "shall establish and implement a written respiratory protection program with worksite-specific procedures"; each worker's medical evaluation comes "before the employee is fit tested or required to use the respirator"; and tight-fitting respirators are fit tested "prior to initial use" and "at least annually thereafter" (OSHA, 29 CFR 1910.134, checked November 2026).
The program is a start-up cost with three parts: the written program, a medical evaluation for each worker, and fit testing with the exact respirator model the crew will wear. Voluntary use of filtering facepieces is treated more lightly in the standard, but a protocol that specifies a half-face respirator makes its use required, not voluntary.
Insurance for mold remediation: general liability and contractors pollution liability
Texas requires the general liability policy; the risk sits in a different one. Insureon states that general liability "typically excludes" pollution coverage, which is added by endorsement or through a contractors pollution liability (CPL) policy covering "third-party bodily injury, property damage, mediation, and legal defense costs" from pollution events tied to the contractor's work (Insureon, contractors pollution liability, updated June 30, 2023). Spores released from a failed containment into the rest of a house are the event a mold remediator insures against.
The same page gives an average of about $223 a month for environmental liability insurance, a general figure rather than one for mold remediators, with a minimum self-insured retention of $5,000 and limits up to $25 million. It distinguishes claims-made policies, which respond only to claims filed while the policy is active, from occurrence policies, which cover losses during the policy period even after it ends. A remediation company asks its broker to confirm in writing that mold is a covered pollutant on both policies before the first job.
Mold remediation equipment and start-up costs
The equipment list follows the protocol: containment, negative air, HEPA cleaning, drying and verification. BlueDri lists its BD-76 150-pint-per-day commercial dehumidifier at $1,199.00 and its BD-130 225-pint unit at $1,299.00 (BlueDri, dehumidifiers, checked November 2026). Air scrubbers with HEPA filtration and ducting for negative air, HEPA vacuums, moisture meters, 6-mil polyethylene, zipper doors, spray equipment and respirators complete the kit; their prices vary by brand and are budgeted below as sample figures.
| Item | Basis | Amount |
|---|---|---|
| Contractor license, company license, two worker registrations | TDLR fees | $1,400 |
| Accredited contractor course, AMRT and WRT courses | Sample | $3,800 |
| Two dehumidifiers, BlueDri BD-76 | Listed price | $2,398 |
| Three HEPA air scrubbers with ducting | Sample | $3,300 |
| Two HEPA vacuums | Sample | $1,400 |
| Moisture meters and thermo-hygrometer | Sample | $700 |
| Containment stock, sprayers and hand tools | Sample | $1,500 |
| Respirators, fit testing and medical evaluations | Sample | $900 |
| First-year deposit on general liability and pollution policies | Sample | $1,500 |
| Truck lettering, shelving and website | Sample | $3,500 |
| Working capital for the first three months | Sample | $15,000 |
| Total | Sum | $35,398 |
The budget leaves out the truck, which the owner is assumed to have. Rebuild work after remediation, drywall and paint, is a separate service line. A plan for a restoration company that sells drying, remediation and rebuild together is the subject of the water damage restoration business plan guide.
Sample job: 60 square feet of mold in a Houston bathroom wall
The job is hypothetical: a single-family, owner-occupied house in Houston with 60 contiguous square feet of mold on drywall behind a leaking shower valve, above the 25-square-foot exemption and inside EPA's limited containment class. The assessor's protocol calls for limited containment, half-face respirators with HEPA cartridges, removal of affected drywall and insulation, HEPA vacuuming and cleaning of framing, and drying to the clearance criteria. Two employed technicians do the work over two days.
Labor uses the BLS median wage for hazardous materials removal workers, whose duties include identifying and disposing of mold, $23.78 an hour in May 2025 (BLS Occupational Outlook Handbook, hazardous materials removal workers, modified August 27, 2026). Wages were 74.6% of employer compensation costs in the administrative and waste services industry in June 2026 (BLS, Employer Costs for Employee Compensation, Table 4), so a loaded technician hour costs $31.88. Truck miles use the IRS rate of 76 cents a mile from July 1, 2026 (IRS), and the homeowner pays by card at Stripe's in-person rate of 2.7% plus 5 cents (Stripe pricing, checked November 2026).
| Line | Basis | Amount |
|---|---|---|
| Technician hours | 2 technicians × 7 h = 14 h × $31.88 | $446.32 |
| Work plan and TDLR notification paperwork | 2 h × $31.88 | $63.76 |
| Containment: 6-mil poly, zipper door, tape | Sample | $85.00 |
| Cartridges, suits and gloves for two | Sample | $60.00 |
| Air scrubber and HEPA vacuum, two days | Sample equipment charge | $90.00 |
| Dehumidifier | $1,199.00 over 300 job-days (sample), 2 days | $7.99 |
| Cleaning agents and HEPA bags | Sample | $35.00 |
| Bagged debris disposal | Sample | $40.00 |
| TDLR notification fee | Owner-occupied residential, initial | $25.00 |
| Truck | 2 trips × 40 miles × $0.76 | $60.80 |
| Payment fee | Card, 2.7% + $0.05 | $70.25 |
| Direct cost | Sum | $984.12 |
| Price | Sample, $43.33 a square foot | $2,600.00 |
| Gross profit | $2,600.00 − $984.12 | $1,615.88 |
| Gross margin | 62.15% |
The gross margin looks high until the fixed costs are set against it. A sample year of fixed costs, with $2,676 for pollution coverage at Insureon's $223 monthly average, $2,400 for general liability, $1,400 of TDLR fees, $2,500 of training, $4,000 of equipment depreciation, $2,200 for the truck, $9,000 for marketing, $3,000 for software and phones and a $60,000 owner salary, comes to $87,176. At $1,615.88 a job, the company needs 54 jobs of this size, about one a week, before it earns a profit. The assessor's protocol and clearance fees are paid by the owner to the consultant and are outside the remediator's price.
First customers for a mold remediation business
The first accounts come from people who find mold before the owner does. Assessment consultants cannot remediate the projects they assess in Texas, so the work they find goes to another firm. Plumbers fix the leak and leave the wet wall. Property managers and landlords have repeat units, and home inspectors and real estate agents meet mold in sale transactions, where the Texas rule on handing certificates to the buyer gives the remediator's paperwork a second use.
Each referral source is a relationship to track: who sent which job, what it paid, and whether the protocol came from the same consultant. Water restoration companies without a remediation crew are a further source, and the marketing side of that trade is covered in the guide to water damage restoration business marketing.
Mold remediation business startup checklist
- Choose the state and confirm whether it licenses mold remediation; in Texas, plan for the contractor license, the company license and worker registrations.
- Complete the accredited contractor course and meet one of the education and experience combinations before applying.
- Open a Texas office with a physical address, and bind general liability of at least $1 million per occurrence.
- Confirm in writing that mold is a covered pollutant, and add contractors pollution liability or an endorsement.
- Buy the IICRC S520 standard and write company procedures from it; schedule WRT and AMRT training.
- Write the respiratory protection program, and complete medical evaluations and fit tests before the first job.
- Buy containment, HEPA, drying and measurement equipment, and record each unit's serial number.
- Build the job sequence into the schedule: protocol, work plan, five-day TDLR notice, remediation, clearance and the 10-day certificate.
- Price jobs from labor, materials, disposal and fees, and set the annual fixed costs against gross profit per job.
- Verify the first job: the clearance passed, the certificate went to the owner within 10 days, and the actual hours match the estimate.
Work orders, photos and equipment records in FieldRanger
FieldRanger holds the job record a remediation company works from. The work order on the technician's phone carries job details, customer information and instructions, job-specific checklists hold the protocol's steps, before and after photos are attached to the work order and sync to the customer's HubSpot record, and the property owner signs on site as proof of completion. Each air scrubber and dehumidifier can carry a QR code and be checked in and out by scanning it, with a usage history of who used which unit and when. Job files and photos can be kept in Google Drive, which suits the protocol, work plan and certificate for each project.
The sale and the billing sit on HubSpot records. Contacts and companies sync both ways, so consultants, plumbers and property managers are tracked as referral sources, and an estimate is built from the HubSpot deal or contact record or in FieldRanger and sent for signature through PandaDoc. A won deal becomes a job with its context carried over, the invoice is generated from the completed work order, payment can be taken in the field through Stripe, and revenue reports show job revenue and margin by customer. One job can carry both technicians. Multi-day jobs are not built, so a two-day remediation is two jobs, one per day. Plans are listed on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
How to start a mold remediation business?
Complete accredited training, obtain the state license where one is required, carry general liability and pollution coverage, buy containment, HEPA and drying equipment, write procedures from the IICRC S520 standard and an OSHA respiratory program, and price each job from labor, materials, disposal and fees.
Does Texas require a license for mold remediation?
Yes. Texas requires a mold remediation contractor license, $450, a company license, $850, and a $50 registration for each worker, under rules administered by TDLR. Projects with less than 25 contiguous square feet of visible mold can be done by unlicensed people, but a licensed contractor follows the rules on any project.
Can a mold remediation company also do mold testing?
Not on the same project in Texas. TDLR's FAQ states that a licensee may not conduct both mold assessment and mold remediation on the same project, except on school district projects, so testing and clearance come from a separate licensed assessment consultant.
How much does it cost to start a mold remediation business?
The Texas sample in this guide budgets $35,398, including $1,400 of TDLR fees, $2,398 for two dehumidifiers at BlueDri's listed price, training, other equipment and $15,000 of working capital. It assumes the owner already has a truck.
How much does mold remediation insurance cost?
Insureon gives an average of about $223 a month for environmental liability insurance, a general figure, and Texas requires general liability of at least $1 million per occurrence for a remediation company. A quote confirms whether mold is a covered pollutant.
Is a mold remediation business profitable?
The Houston sample job, 60 square feet at $2,600, leaves $1,615.88 after labor, materials, disposal and fees. Against $87,176 of sample annual fixed costs, including a $60,000 owner salary, the company needs 54 such jobs a year before it earns a profit.
A Houston remediation that takes two days on site starts with a five-day notice to TDLR and ends with a certificate due within ten, so the schedule for each job holds three dates, and only one of them is the crew's.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo