Guide

How to Start a Solar Panel Business:Dealer, Installer and Service Models, Florida Solar Contractor Licensing, NABCEP Training, FSEC Standards and a Tampa Install Priced per Watt

How to start a solar panel business: dealer, installer and service models, Florida's solar contractor license, NABCEP training and a Tampa job priced per watt.

By Published Updated

11 min read

How to start a solar panel business: choose to sell, install or service systems, qualify the business through a licensed contractor before signing an installation contract, train installers toward NABCEP certification, and price each job per watt against the local market. A Florida certified solar contractor passes a state exam and has, on the main route, four years of experience.

A solar company has three ways to lose money on a job it has already sold. It signs the contract before anyone in the business holds the license the contract needs. It prices from a figure that is not the local market's. It sells a homeowner tax credit that ended on December 31, 2025. This guide is one of the starting a business guides from FieldRanger, which builds solar business management software on HubSpot. It starts with the four business models, then Florida licensing, NABCEP training, the state's equipment standards and the 2026 federal credit position. Net metering, Tampa prices and a costed 10 kW install follow. The last sections are a checklist and the job records in FieldRanger.

Five terms are used below in a narrow sense. Price per watt is the installed price divided by the system's rated capacity in watts, the unit installers and buyers compare quotes in. A certified contractor in Florida holds a state certificate valid in every jurisdiction; a registered contractor has met one local jurisdiction's competency requirements and may contract only there. A primary qualifying agent is the licensed person through whom a business organization is qualified to contract. Third-party ownership means a lease or power purchase agreement, in which a company owns the system on the homeowner's roof. Net metering lets the electricity a customer's system produces offset the electricity the customer uses on site.

Solar business models: dealer, installer, subcontract crew and service company

The model decides what the company sells, who it hires first and which license it needs before the first contract. Florida's definition of a contractor reaches beyond the business that does the work: it covers the person who, for compensation, "undertakes to, submits a bid to, or does himself or herself or by others construct, repair, alter, remodel, add to" a building or structure (Florida Statutes 489.105, 2026 Florida Statutes, read November 13, 2026). A dealer that signs the homeowner's installation contract and hands the work to another company is therefore contracting under that definition.

Solar business models and the Florida license question each raises (2026 Florida Statutes, read November 13, 2026)
ModelWhat the company doesLicense question in Florida
Sales dealerSigns the homeowner contract; installation by a partnerSigning the contract is contracting under section 489.105
InstallerDesigns, permits, installs and interconnects its own jobsSolar contractor, certified or registered, or another licensed contractor working within its own scope
Subcontract install crewInstalls under dealers' and national companies' contractsThe license follows the work performed; confirm with the licensing board before the first job
Service companyRepairs, maintenance, relocation and replacement of existing systemsRepair, maintenance, relocation and replacement sit inside the solar contractor definition

A business that only washes panels, without touching the system's equipment, is closer to the trade set out in how to start a cleaning business. Whether a given cleaning service crosses into the license's "maintenance" is a question for the board rather than for the company's own reading.

Florida solar contractor license: certified and registered

Florida defines a solar contractor as one whose services consist of "the installation, alteration, repair, maintenance, relocation, or replacement of solar panels for potable solar water heating systems, swimming pool solar heating systems, and photovoltaic systems and any appurtenances, apparatus, or equipment used in connection therewith." A contractor already certified or registered under the same chapter does not need a solar license for work inside its own scope (Florida Statutes 489.105(3)(o)).

The Construction Industry Licensing Board issues the license in two forms. A certified contractor holds a certificate of competency and may contract "in any jurisdiction in the state"; its occupation code begins with C. A registered contractor has met the competency requirements of one jurisdiction, may contract only there, and carries a code beginning with R (Florida DBPR, Construction Industry Licensing Board, read November 13, 2026). For a Tampa company that plans to work in neighboring counties, the certified license is the one that travels.

Eligibility for certification sits in section 489.111. The routes include a four-year degree in engineering, architecture or building construction with one year of experience in the category, or four years of active experience as a skilled worker or foreman, "at least 1 year" of it as a foreman, with combinations of college credit and experience in between (Florida Statutes 489.111). Before the certificate issues, the applicant files an affidavit of workers' compensation, public liability and property damage insurance "in amounts determined by rule of the board", and a credit report from a nationally recognized credit agency (Florida Statutes 489.115). A founder without the four years qualifies the business through a primary qualifying agent who has them.

NABCEP PV Installation Professional pathway

Florida's license is the legal threshold; NABCEP's PV Installation Professional certification is a voluntary industry credential on top of it. NABCEP's Board Eligible pathway lets a candidate sit the exam before finishing the experience requirement. The candidate submits verification of 58 hours of classroom learning, takes the exam, and has one year or four attempts after the course end date to pass it. After passing, the Board Eligible professional has three years to complete the industry experience projects and convert to full certification, with no further fee for the conversion (NABCEP, Board Eligible PV Installation Professional, read November 13, 2026). A new installer can therefore be Board Eligible in the company's first season and certified within three years of passing.

Florida Solar Energy Center standards for systems sold in Florida

Florida adds an equipment rule of its own. Under the Solar Energy Standards Act of 1976, the Florida Solar Energy Center adopts standards for solar energy systems manufactured or sold in the state, and "all solar energy systems manufactured or sold in the state must meet the standards established by the center." The systems must display accepted results of approved performance tests, unless an engineer licensed under chapter 471 certifies them against the Florida Building Code (Florida Statutes 377.705, 2026 Florida Statutes, read November 13, 2026). A new company's equipment list is checked against those requirements before the first quote, not after the first inspection.

Cash sales, loans and third-party ownership after the residential credit

The federal credit position changed the product a residential company sells. The IRS states that the Residential Clean Energy Credit "is not available for any property placed in service after December 31, 2025" (IRS, Residential Clean Energy Credit, updated July 4, 2026, read November 13, 2026). A homeowner who buys a system for cash or with a loan in 2026 claims no 30% credit. The Clean Electricity Investment Credit under section 48E is claimed by the taxpayer that owns a qualified facility placed in service after December 31, 2024 (IRS, Clean Electricity Investment Credit, updated January 5, 2026). EnergySage's Tampa page reports that companies offering lease or rent-to-own systems "can still claim a version of it" (EnergySage, Tampa solar panel cost, as of November 2026).

For a new company, the result is a choice of channel rather than of marketing. A company that sells for cash or a loan sells the system on its electricity value alone. A company that sells third-party-owned systems, as a dealer for the owner or as the owner, sells a product that still carries a federal credit, claimed by the owner company. How a savings or incentive claim may be worded in advertising is set out in solar marketing ideas.

Net metering and interconnection under section 366.91

Florida law defines customer-owned renewable generation as a system on the customer's premises "primarily intended to offset part or all of the customer's electricity requirements", and net metering as the method that lets that generation "offset the customer's electricity consumption on site." Each public utility was required to develop "a standardized interconnection agreement and net metering program for customer-owned renewable generation," and the Public Service Commission sets the requirements for expedited interconnection. Municipal utilities and rural electric cooperatives run their own programs under the same section (Florida Statutes 366.91, 2026 Florida Statutes). The interconnection agreement is therefore utility by utility, and a company working across Hillsborough and Pinellas counties keeps one checklist per utility it connects to.

Tampa installed prices and the per-watt quote

The local price is the number a new company's quote is measured against. EnergySage reports that, as of November 2026, the average solar panel system in Tampa costs $2.03 per watt including installation. The average Tampa system is 15 kW, which comes to about $30,389 before incentives, with a range of $25,831 to $34,947; a 5 kW system costs about $10,133 (EnergySage, Tampa solar panel cost). The range converts to $1.72 to $2.33 per watt. The figures come from quotes in one marketplace, so they show the competing price a Tampa homeowner sees there, not a survey of every installer.

Labor is the second local number. The median wage for solar photovoltaic installers in the Tampa-St. Petersburg-Clearwater area is $51,170 a year, or $24.60 an hour at 2,080 hours; the Florida median is $24.30 an hour (O*NET, Florida wages for 47-2231.00, BLS 2025 wage data, read November 13, 2026).

Sample 10 kW residential install in Tampa

This sample is a hypothetical company: a certified solar contractor in Tampa that sells through a commissioned sales representative and installs with its own three-person crew in two days. The price is the EnergySage Tampa average; the wage is the Tampa median; equipment, the labor load, permit and paperwork costs, the commission and the survey cost are sample inputs.

Sample 10 kW Tampa install priced at $2.03 per watt (EnergySage price and O*NET wage, November 2026; other lines are sample inputs)
LineCalculationAmount
Contract price10,000 watts × $2.03$20,300.00
Modules, inverters, racking and wireSample $0.95 per watt$9,500.00
Installer wages3 installers × 2 days × 9 hours × $24.60$1,328.40
Installer cost with taxes, workers' compensation and insurance$1,328.40 × 1.30 (sample load)$1,726.92
Permit, engineering and interconnection paperworkSample input$650.00
Sales commissionSample $0.25 per watt$2,500.00
Site survey and designSample input$300.00
Direct cost of the jobSum of cost lines$14,676.92
Gross margin$20,300.00 − $14,676.92$5,623.08 (27.7%)

The direct cost is $1.47 per watt. At the bottom of the Tampa range, $1.72 per watt, the same job brings in $17,200.00 and leaves $2,523.08, so the $2,500.00 commission takes almost the whole margin. At the top of the range, $2.33 per watt, the margin is $8,623.08. The sample's installer cost is smaller than the commission: a dealer-led company's margin depends on the price per watt it holds, and an installer-led company's on the equipment price it pays. The two days are also two separate visits in the job record, which matters for the software section below.

Solar panel business startup checklist

  1. Choose the model: dealer, installer, subcontract crew or service company.
  2. Confirm whether the business qualifies through a certified or registered solar contractor, or another contractor working within its scope, and name the primary qualifying agent.
  3. Assemble the certification file: experience records, the insurance affidavit and the credit report.
  4. Enroll the first installers in NABCEP's 58 hours of classroom learning and book the PV Installation Professional exam.
  5. Check every module, inverter and system on the equipment list against the Florida Solar Energy Center requirements.
  6. Decide whether to sell cash and loan systems, third-party-owned systems, or both, and write the quote for each without the expired residential credit.
  7. Collect the interconnection agreement and net metering program of each utility in the service area.
  8. Price the first quotes per watt against the local range, and cost each one before it goes out.
  9. Draft the homeowner agreement and the service terms, including what maintenance visits cover; the solar panel maintenance checklist sets out the inspection items.
  10. Verify: before the first contract is signed, look up the qualifying agent's license on the DBPR license search and confirm the business is listed under it.

Site surveys, install days and service visits in FieldRanger

FieldRanger runs a solar company's field work on HubSpot records. An estimate can be built from the HubSpot deal or contact record, or in FieldRanger and kept tied to the HubSpot deal it belongs to, as described on the estimating page. Estimates and agreements go out for signature through PandaDoc, and a won HubSpot deal becomes a job with its context carried over. The site survey, each install day and each service visit is a job assigned to one technician. Each day of a two-day install is its own job, since multi-day jobs are not built.

On site, the digital work order carries job details, customer information and instructions to the technician's phone. Custom checklists hold job-specific steps for quality and compliance, before and after photos attach to the work order, and photos taken on the job sync to the customer's HubSpot record. Customer signatures on site serve as proof of completion. Technicians check parts and materials, panels among them, out of a specific warehouse, so stock is counted where it sits, and materials used on each job are logged for job costing. Recurring job templates cover maintenance contracts. The invoice is generated from the completed work order. Homeowners can book a visit online, and progress billing is not built. The plans are listed on pricing, and Start free trial gives 14 days with no card required.

Frequently asked questions

How to start a solar panel business?

Choose a model (dealer, installer, subcontract crew or service company), qualify the business through a licensed solar contractor before signing installation contracts, train installers toward NABCEP certification, and price each job per watt against the local range. In Florida, check the equipment against the Florida Solar Energy Center requirements too.

What license is needed to install solar panels in Florida?

A solar contractor license from the Construction Industry Licensing Board, certified for statewide work or registered for one local jurisdiction, unless another licensed contractor does the work within its own scope. Certification needs four years of experience, one as a foreman, or a qualifying degree with one year of experience.

Can a solar sales company sign contracts without a contractor license in Florida?

Florida's statute defines a contractor as the person who, for compensation, undertakes to or submits a bid to construct or improve a structure, by itself or by others. A dealer signing the installation contract falls within that definition, so the business qualifies through a licensed contractor first.

Is the 30% solar tax credit available in 2026?

Not to homeowners who buy. The IRS states the Residential Clean Energy Credit is not available for property placed in service after December 31, 2025. A company that owns a system, as in a lease, looks to the business credit under section 48E instead.

How much does a solar installation cost in Tampa?

EnergySage reports an average of $2.03 per watt in Tampa as of November 2026, or about $30,389 for the average 15 kW system before incentives, with a range of $25,831 to $34,947.

A 10 kW Tampa roof at $2.03 per watt leaves $5,623.08 after the sample's costs, and at $1.72 it leaves $2,523.08, an amount a 25-cent commission almost exactly consumes; the license comes first, and the price per watt the company can hold comes second.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo