Guide

HVAC Business Cards:Texas and Arizona License Number Rules, Technician QR Codes, Magnet Cards and Print Costs

HVAC business cards: what a technician's card carries, Texas and Arizona license number rules, QR codes that tag each tech's leads, magnets and print costs.

By Published Updated

11 min read

HVAC business cards carry the company name as licensed, the contractor license number where the state requires it in advertising, one service phone number, the services and area served, and a QR code that opens a service request form. A heating and cooling card has a second job: it stays near the equipment until the next breakdown.

An HVAC card goes wrong in ways the printer cannot catch. A Texas card leaves off the license number that the state's rule requires on advertising. An Arizona card relies on a QR code where the statute wants the number printed. A card for every technician carries the same code, so nobody can tell which technician's visits produce the calls. FieldRanger sells HVAC software for contractors whose customers sit in HubSpot, and this guide covers the card those contractors leave behind. It sets out what each type of card carries, then the license number rules in Texas and Arizona, EPA Section 608 credentials, technician QR codes, magnet cards and print costs. It prices a sample card kit and closes with a checklist.

Three terms recur. The affiliated licensee is the licensed individual whose license a Texas contracting company operates under. A query string is the part of a web address after the question mark, which can carry values into a form. Mil is a thousandth of an inch, the unit in which magnet thickness is sold.

Professional HVAC business cards: content by card type

A heating and cooling company prints three cards, and each has a different reader and a different place to live.

HVAC card types and what each carries
Card typeReader and momentWhat it carries
Company cardA prospect at a home show, a supply house counter or a realtor's officeCompany name as licensed, license number, services, area served, service phone number, website
Technician cardThe homeowner at the end of a service callEverything on the company card, plus the technician's name and a QR code that identifies the technician
Equipment magnetThe next person who looks for help when the system failsCompany name, license number, service phone number and a line for the date of the last service

Professional HVAC business cards keep the front for the name, the number and the phone, and move the services list and the code to the back. A homeowner reading a card in a hot house needs the phone number first.

License numbers on HVAC advertising in Texas

Texas writes the rule into its air conditioning and refrigeration contractor regulations. Under 16 Texas Administrative Code section 75.71(h), advertising by a contracting company designed to solicit air conditioning or refrigeration business "must include the affiliated licensee's license number" (16 Tex. Admin. Code § 75.71, via Cornell LII, last amended effective May 1, 2018).

The rule lists seven exemptions, and a business card is not among them:

  • nationally placed television advertising;
  • telephone book listings with only a name, address and phone number;
  • manufacturer or distributor trade advertisements in the telephone book;
  • telephone solicitations where the number is given on request;
  • promotional items of nominal value, such as caps and tee shirts;
  • letterheads and printed forms for office use;
  • signs at the permanent business location.

A card handed to a homeowner to win the next call is advertising designed to solicit business, so it carries the number.

Two neighbouring rules complete the picture. Section 75.71(g) requires the affiliated licensee's number and the company name in letters at least two inches high on both sides of every vehicle. Section 75.71(i) requires proposals, invoices and written contracts to carry the statement that the work is regulated by the Texas Department of Licensing and Regulation, with its address, phone numbers and website. The TDLR statement belongs on the paperwork, not the card. TDLR's rule changes adopted for September 1, 2026 amended sections 75.10, 75.80, 75.110, 75.121 and 75.124 and did not include section 75.71 (TDLR, Commission adopts rules, August 31, 2026).

A magnet sits near the promotional-item exemption. A magnet printed with the service phone number is designed to solicit the next repair, which is the condition section 75.71(h) uses, so the conservative reading prints the number on it as well.

License numbers on printed cards in Arizona

Arizona puts the rule in its contractor statute and adds a prefix. A.R.S. section 32-1124(B) requires the license number, "preceded by the acronym 'ROC'", on all written bids and estimates and "on all published advertising, letterheads and other documents used by the licensee to correspond" with customers or potential customers (A.R.S. § 32-1124, checked November 12, 2026).

The statute allows one substitute for the printed number, and it does not reach cards. Chapter 114 of the 2021 session, approved March 24, 2021, lets broadcast, internet and billboard advertising omit the number. The condition is a web address that links directly to a site prominently showing the licensee's name and license number (Arizona Legislature, Laws 2021, Chapter 114). A business card is published advertising, not a broadcast or a billboard, so a QR code printed on it does not replace "ROC" and the number. Subsection C makes a violation grounds for discipline at the Registrar's discretion.

EPA Section 608 certification and the card

EPA Section 608 is a technician credential, not a company license. EPA's regulations "require that technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants" be certified. EPA states that it "does not issue certification cards" itself (EPA, Section 608 Technician Certification, updated March 3, 2026). Its requirements page adds that the credentials "do not expire" and that tests are administered by EPA-approved certifying organizations (EPA, Section 608 Technician Certification Requirements, updated July 15, 2026).

Neither EPA page sets any rule for advertising or for displaying the credential. "EPA certified" on a company card is a claim about the technicians, and it is accurate only while every technician who handles refrigerant holds the certification. A technician card can state the holder's own certification type, such as Universal, because that card names one person.

Technician QR codes that tag leads in HubSpot

A QR code on a technician card earns its space when the scan identifies the technician. HubSpot forms accept values from the address itself: a query string such as ?tech_card=tech-07 fills a form field whose internal name matches. HubSpot states that "form fields, including hidden fields, will automatically populate based on the query string added" (HubSpot Knowledge Base, Pre-populate form fields with query strings, updated July 27, 2026). The feature is available on all products and plans.

The setup follows from that article. A contact property holds the technician code, the property is added to the service request form as a hidden field, and each technician's QR code encodes the form's address with that technician's code appended. HubSpot's value rules apply: dropdown and radio values must match the property's options exactly, and spaces are encoded as %20. A short code with no spaces avoids both problems. Query strings cannot populate dependent form fields. Dynamic query strings built from personalization tokens need Marketing Hub Professional or Enterprise and a HubSpot-hosted page, but a fixed code per technician needs neither.

Each submission then creates or updates a contact that carries the technician's code. A HubSpot list or report filtered on that property counts the calls each technician's cards produce, which is a number a service manager can act on at the next ride-along.

Magnet business cards for indoor equipment

A magnet card earns its higher price by staying put. Custom Magnets Direct lists 2 by 3.5 inch, 20 mil business card magnets at $0.18 each for 250 to 499, $0.172 for 500 to 999 and $0.153 for 1,000 to 2,499. The minimum order is 250, setup is free, and the listing carries the note "Not made for outdoor use" (Custom Magnets Direct, 20 mil business card magnets, checked November 12, 2026). 4imprint lists 20 mil business card magnets from $0.13 to $0.20 and 30 mil magnets from $0.15 to $0.24, both with a 500-piece minimum (4imprint, business card magnets).

The outdoor note decides placement. A magnet on a rooftop unit or a condenser in an Arizona summer is outside what the product is made for. The magnet goes on the steel cabinet of the indoor furnace or air handler, or on the refrigerator. A line printed for the service date, written in at each tune-up against the HVAC maintenance checklist, turns the magnet into the system's service record.

Paper cards follow the US standard trim of 3.5 by 2 inches, in landscape or portrait. UPrinting lists 14 point and 16 point cardstock, landscape or portrait layouts, a 25-card minimum and production in as little as one business day. Its pricing runs "as low as $0.07 per card" for 500, depending on size, thickness and finishes (UPrinting, business cards, checked November 12, 2026). NextDayFlyers prices 100 standard cards on 14 point cardstock with high gloss UV coating at $49.95, or about $0.50 each (NextDayFlyers, standard business cards, checked November 12, 2026).

The two prices show the trade-off in quantity. A technician card printed in a run of 100 costs about seven times UPrinting's lowest 500-card price, and it buys a code per technician. The QR code is tested from the printer's proof on two phones, and the test submission is checked in HubSpot for the hidden field's value, before the run is approved.

Sample card kit for a three-technician company in Phoenix

The sample prices one year of cards and magnets for a hypothetical Arizona contractor with three service technicians. The visit count and the number of cards per technician are sample inputs, labelled as such; the prices are the published figures above, read on November 12, 2026, before shipping and tax.

Sample HVAC card and magnet kit for one year (sample inputs labelled; published prices checked November 12, 2026)
ItemQuantityUnit priceCostSource
Maintenance visits1,200: 400 per techniciannot applicablenot applicableSample input
Technician cards, each with "ROC" and the license number and its own QR code3 runs of 100$49.95 a run$149.85NextDayFlyers
Equipment magnets, 20 mil, one left per maintenance visit1,200$0.153$183.60Custom Magnets Direct, 1,000 to 2,499 tier
Totalnot applicablenot applicable$333.45Sum
Cost per maintenance visitnot applicablenot applicable$0.28$333.45 ÷ 1,200

The kit costs 28 cents a visit, and the demanding part is the QR code's discipline rather than the print. Per piece, a technician card costs about three times a magnet, because each technician's code is printed in a short run of 100. The number printed after "ROC" is the line that the statute governs, so it is read against the license record on the proof. The card and magnet budget belongs in the marketing section of an HVAC business plan, beside truck lettering and paid search.

The phone number on those 1,200 magnets is also an asset. A buyer valuing the company counts the number and the channels that ring it among the goodwill, as the guide to how to sell an HVAC business sets out. The number printed is therefore one the company owns and keeps.

HVAC business card checklist

  1. Print the company name exactly as licensed and registered.
  2. In Texas, print the affiliated licensee's license number on every card and magnet that solicits work; in Arizona, print "ROC" followed by the number.
  3. Keep the TDLR regulation statement for proposals, invoices and contracts, where Texas requires it.
  4. State "EPA certified" only while every technician handling refrigerant holds Section 608 certification, or name the holder's certification on a technician card.
  5. Create a technician code property, add it to the service request form as a hidden field, and encode one QR code per technician.
  6. Order magnets rated for indoor use and place them on the indoor unit or the refrigerator, with a line for the service date.
  7. Print the phone number the company owns, not a technician's personal number.
  8. Verify each run: scan every technician's code on two phones, confirm the hidden field value on the test contact in HubSpot, and read the license number against the license record.

Maintenance agreements and service calls in FieldRanger

The magnet and the card produce calls, and the maintenance agreement turns them into a calendar. In FieldRanger, recurring job templates hold maintenance contracts and repeat service calls, as the recurring jobs page describes. Skill-based assignment matches jobs to technicians by certification and expertise, and multi-technician views show every technician side by side with availability. A won HubSpot deal becomes a job with its context carried over, and job completions, notes and updates are logged to the HubSpot timeline, beside the form submission that carried the technician's code. The invoice is generated from the completed work order, and revenue reports show job revenue and margin by customer or service type. Plans are listed on pricing, and Start free trial runs 14 days with no card.

Frequently asked questions

What should an HVAC business card say?

The company name as licensed, the license number where the state requires it, one service phone number, the services and area served, and a QR code to a service request form. A technician card adds the technician's name and a code that identifies the technician.

Does an HVAC business card need a license number in Texas?

Yes, where the card solicits air conditioning or refrigeration business. Texas rule 16 TAC 75.71(h) requires the affiliated licensee's license number on such advertising, and business cards are not among its listed exemptions.

Does an Arizona contractor's business card need the ROC number?

Yes. A.R.S. 32-1124 requires "ROC" and the license number on published advertising. The web address exception covers broadcast, internet and billboard advertising only, so a QR code does not replace the printed number on a card.

Should an HVAC business card show EPA 608 certification?

No rule found on EPA's pages requires it. Section 608 certifies individual technicians, so a company card says "EPA certified" only while every technician handling refrigerant holds it, and a technician card can name its holder's certification.

Are magnet business cards worth it for HVAC?

They stay at the equipment. On November 12, 2026, Custom Magnets Direct listed 20 mil card magnets at $0.153 each for 1,000 to 2,499, rated for indoor use only, so they belong on the furnace cabinet or the refrigerator.

How much do HVAC business cards cost?

NextDayFlyers listed 100 standard cards on 14 point stock with high gloss UV at $49.95, and UPrinting listed pricing as low as $0.07 a card at 500, as checked on November 12, 2026, before shipping and tax.

Three runs of 100 cards and 1,200 magnets cost the Phoenix sample $333.45, and the one line on them that the statute polices is the license number printed after "ROC". A Texas branch of the same company would print the affiliated licensee's number without the prefix, so one card design does not serve both states.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo