Guide
HVAC Business Loans:SBA 7(a) and Microloan Terms, Rate Caps, Guaranty Fees, Equipment Financing and a Sample Payment
HVAC business loans compared: SBA 7(a) and microloan terms, rate caps over the prime rate, FY 2027 guaranty fees, equipment financing and a sample payment.
HVAC business loans come in four main forms: SBA 7(a) loans up to $5 million for vans, equipment, working capital or a purchase; SBA microloans up to $50,000; SBA 504 loans for long-life equipment and property; and conventional equipment financing secured by the item bought. Rate caps, guaranty fees and collateral rules differ by program and by loan size.
A loan that fits an HVAC company's purchase can still misfit its calendar and its size. A ten-year van note carries the same payment in January as in July, while receipts arrive in two seasonal peaks. A request of $151,000 pays a higher fee rate than one of $150,000. A working-capital loan drawn in May for the cooling season is repaid across the slow months that follow. FieldRanger, which makes HVAC software that runs inside HubSpot, wrote this guide for the owner or office manager preparing a loan request. It compares the loan types, then covers 7(a) terms, rate caps, the fiscal 2027 fees, microloans, seasonal lines, equipment financing and its tax treatment. A sample payment calculation, a checklist and the records a lender reads close it.
Four terms carry the numbers. The prime rate is the bank prime loan rate published by the Federal Reserve, to which SBA 7(a) rate caps are pegged. The guaranteed portion is the share of a 7(a) loan the SBA repays the lender if the borrower defaults. The upfront guaranty fee is a percentage of that guaranteed portion, charged once. Maturity is the length of the loan, which the SBA ties to the use of the money.
HVAC business loan types compared
| Program | Maximum | Fits | Does not fit |
|---|---|---|---|
| 7(a) Small | $350,000 | Vans, tools, working capital, refinancing, a partner buyout | Revolving lines |
| Standard 7(a) | $5 million | Larger equipment, real estate, the purchase of a company | Requests of $350,000 or less, which fall under 7(a) Small |
| SBA Express | $500,000 | Revolving lines of credit up to 10 years | Lenders wanting more than a 50% guaranty |
| Microloan | $50,000 | Tools, supplies, inventory, a used van | Paying existing debt, real estate |
| CDC/504 | $5.5 million | Machinery with at least 10 years of remaining life, buildings | Working capital, inventory |
Sources: SBA, 7(a) terms, conditions and eligibility; SBA, types of 7(a) loans; SBA, microloans; SBA, 504 loans. The 504 page gives $5.5 million in its body and "up to $5 million" in its summary; the table uses the lender terms page, which also says $5.5 million.
A conventional equipment loan sits beside these programs: secured by the van or machine it buys, with no SBA guaranty or fee, on the lender's own rate, term and down payment. Customer financing for a homeowner's replacement system is a different product, credit to the customer rather than a loan to the business.
SBA 7(a) loan terms for an HVAC company
SBA loans for an HVAC business start with eligibility. The SBA lists the 7(a) uses as real estate, "short- and long-term working capital", refinancing, "purchasing and installation of machinery and equipment", furniture, fixtures and supplies, and changes of ownership; the business must operate for profit in the U.S., meet SBA size standards, and "not be able to obtain the desired credit on reasonable terms" from non-government sources (SBA, 7(a) loans, checked November 12, 2026). The size standard for NAICS 238220, plumbing, heating and air-conditioning contractors, is $19.0 million in average annual receipts (13 CFR 121.201).
The guaranty and the maturity follow the loan. The SBA guaranty covers 85% of a 7(a) loan up to $150,000, 75% above it, and 50% of an SBA Express loan. Equipment loans run "10 years or less" unless the equipment's useful life is longer, working capital runs up to 10 years under the general rule, and real estate up to 25 years. 7(a) Small loans of $350,000 or less are term loans with a stated turnaround of two to ten business days, and revolving lines of credit are permitted only under SBA Express, Export Express or CAPLines (SBA terms and types pages, above).
Collateral depends on size. For 7(a) Small loans, no collateral is required at $50,000 or less; from $50,001 to $500,000 the lender follows its own written policy for similar loans, and the SBA states that "a loan is not to be declined solely on the basis of inadequate collateral" (SBA terms page). The SBA's Lender Match page puts the borrower's side plainly: lenders may ask for a home, vehicle, inventory or other property to secure the loan (SBA, Lender Match).
Maximum 7(a) interest rates against the prime rate
The SBA caps the variable rate a lender may charge, as a spread over the base rate, and the spread narrows as the loan grows. The Federal Reserve's H.15 release reported a bank prime loan rate of 7.00% on November 11, 2026 (Federal Reserve, H.15 selected interest rates, released November 12, 2026).
| Loan amount | Maximum spread over base | Maximum rate at 7.00% prime |
|---|---|---|
| $50,000 or less | 6.5 points | 13.50% |
| $50,001 to $250,000 | 6.0 points | 13.00% |
| $250,001 to $350,000 | 4.5 points | 11.50% |
| Over $350,000 | 3.0 points | 10.00% |
Two readings follow. The cap is a ceiling, and a lender may quote below it, so the borrower compares quotes from several lenders. A variable rate also moves with prime: the payment calculated today holds only until the rate resets.
FY 2027 SBA guaranty fees and the 90-day rule
The upfront fee is set each fiscal year. For 7(a) loans approved from October 1, 2026 through September 30, 2027 with a maturity over 12 months, the fee is 2% of the guaranteed portion for loans of $150,000 or less, 3% for loans of $150,001 to $700,000, and 3.5% up to $1 million plus 3.75% above $1 million for larger loans; short-term loans of 12 months or less pay 0.25% (SBA Information Notice 5000-881797, published September 3, 2026). For loans of $700,000 or less to businesses located in a rural area, the upfront fee is 0%, and SBA Express loans to veteran-owned businesses carry no upfront fee.
The same notice closes the obvious workaround. When two or more 7(a) loans with maturities over 12 months are approved for one applicant and its affiliates within 90 days of each other, "the loans are considered as one loan" for the guaranty percentage and the fee, and "lenders are not permitted to split loans for the purpose of avoiding fees". The lender also pays an annual service fee of 0.55% of the guaranteed balance and "may not pass the Lender's Annual Service Fee on to the Borrower".
SBA microloans for small HVAC purchases
A microloan suits a purchase too small for a bank's attention: a recovery machine and gauges, a stock of filters and capacitors, a used van's down payment. The SBA lists "working capital", "inventory", "supplies", "furniture", "fixtures", "machinery" and "equipment" as uses, caps the loan at $50,000, reports an average of about $13,000, and states that rates "vary depending on the intermediary lender", generally between 8% and 13% (SBA, microloans, checked November 12, 2026). Proceeds "cannot be used to pay existing debts or to purchase real estate".
The SBA's two pages disagree on the term. The borrower page states that the maximum repayment term "is seven years"; the lender terms page states that "each Microloan must be repaid within six years". The intermediary's note sets the actual term, and a borrower plans on six until the note says otherwise. The lender page also caps the rate at the intermediary's own SBA rate plus 7.75% for loans above $10,000, and plus 8.5% for $10,000 or less.
Seasonal working capital: CAPLines and lines of credit
An HVAC business line of credit answers the calendar rather than a purchase. The SBA's Seasonal CAPLine finances "the seasonal increases of accounts receivable and inventory" and, in some cases, the added labor cost, as a revolving or non-revolving line with a maximum maturity of 10 years (SBA, types of 7(a) loans, checked November 12, 2026). The 7(a) Working Capital Pilot offers monitored lines of up to $5 million for up to 60 months.
A term loan drawn in full in April charges interest on the whole amount through the slow months; a revolving line drawn against the summer's receivables and repaid as they are collected charges interest only on the balance. The fee schedule separates them too: a loan of 12 months or less pays a 0.25% upfront fee, against 2% or 3% for a longer one.
HVAC equipment financing and the 504 program
HVAC equipment financing takes three forms. A 7(a) loan finances equipment for up to 10 years, or longer where the equipment's useful life exceeds 10 years. A 504 loan finances "long-term machinery and equipment with a useful remaining life of a minimum of 10 years", at fixed rates pegged above the 10-year Treasury rate with 10-, 20- and 25-year terms, and cannot be used for "working capital or inventory" (SBA, 504 loans, checked November 12, 2026); the borrower contributes at least 10% of the project cost (SBA terms page). A conventional equipment loan or lease is arranged with a bank or a dealer, secured by the item.
For an HVAC company, the 504 program fits a building or a sheet metal shop, since its equipment test asks for 10 years of remaining life. Vans and tools sit in a 7(a) loan, a microloan or a conventional vehicle loan.
Section 179 and bonus depreciation on financed equipment
The tax deduction for financed equipment does not wait for the loan to be repaid. For tax years beginning in 2026, the maximum section 179 expense deduction is $2,560,000, reduced dollar for dollar once qualifying property placed in service in the year exceeds $4,090,000; Public Law 119-21 reinstated the 100% special depreciation allowance for certain qualified property "acquired and placed in service after January 19, 2025" (IRS Publication 946, checked November 12, 2026). The same publication sets a $32,000 section 179 limit for sport utility vehicles placed in service in 2026. A van bought with a ten-year loan can therefore produce its deduction in the first year while its payments run for ten; the accountant decides which election applies.
Lender requirements: forms, plans and records
Lender Match, the SBA's referral tool, returns a summary of interested lenders two business days after a request, and its preparation list names six items: a business plan, the amount and use of funds, credit history, financial projections, collateral and industry experience (SBA, Lender Match, checked November 12, 2026). The SBA forms follow. SBA Form 1919 collects information about the applicant and its owners, the loan request, existing debt and current or past government financing (SBA Form 1919, effective March 19, 2025). SBA Form 413, the personal financial statement, is used to assess repayment ability and creditworthiness for 7(a), 504 and other programs (SBA Form 413, effective February 13, 2025).
An HVAC company answers the projections question with its own history: revenue by month across a full year, the maintenance agreements renewed each year, and margin by service line. An owner who has written an HVAC business plan already has the structure of the funding request. The same records set what a buyer's lender will finance when the owner later moves to sell an HVAC business, since SBA change-of-ownership loans are underwritten on that cash flow.
Sample loan payments for a two-technician HVAC company
The sample company is a hypothetical two-technician HVAC business that wants a second service van with tools and a working-capital reserve before the cooling season. The amounts requested are sample inputs. The rates, fees and guaranty shares are the SBA's published figures with the Federal Reserve's prime rate, and each 7(a) loan is priced at the maximum rate over 10 years, the highest payment a lender may charge.
| Structure | Amount | Maximum rate | Guaranteed portion | Upfront fee | Monthly payment |
|---|---|---|---|---|---|
| A. One 7(a) loan for van and reserve | $180,000 | 13.00% | 75%: $135,000 | 3%: $4,050 | $2,687.59 (120 months) |
| B. Request held to $150,000 | $150,000 | 13.00% | 85%: $127,500 | 2%: $2,550 | $2,239.66 (120 months) |
| C. Microloan for tools only | $40,000 | 8% to 13% (intermediary) | None | None | $701.33 to $802.96 (72 months) |
The payment is the standard amortization formula: the loan amount times the monthly rate, divided by one minus (1 + monthly rate) raised to the power of minus the number of months. At 13.00%, the monthly rate is 1.0833%.
Three findings come out of the table. Holding the request to $150,000 lowers the upfront fee by $1,500 and the payment by $447.93 a month, because the loan stays in the 85% guaranty band and the 2% fee band; the remaining $30,000 cannot come from a second 7(a) loan within 90 days without the two being combined. A company located in a rural area pays no upfront fee on either structure. Structure A's payments total $32,251 a year, which the lender compares with the company's cash flow in its weakest months as well as its strongest.
HVAC loan application checklist
- Write down the use of funds by line: vehicles, tools, inventory, working capital, refinancing.
- Match each line to a program: 7(a) or conventional for vans, a Seasonal CAPLine or Express line for the summer peak, a microloan for small tool purchases.
- Size the request against the $150,000 fee and guaranty break, and against the rate tiers at $50,000, $250,000 and $350,000.
- Price the payment at the SBA maximum rate using the current prime rate from the Federal Reserve's H.15 release.
- Prepare twelve months of revenue by month, the maintenance agreement count and renewal history, and margin by service line.
- Complete SBA Form 1919 and a personal financial statement for each owner the lender names.
- Confirm with the accountant whether section 179 or bonus depreciation applies to each financed asset.
- Compare written quotes from at least two lenders on rate, fees, term and collateral.
- Verify: recompute the monthly payment from the lender's quoted rate and term before signing, and confirm it matches the note.
Revenue and agreement records in FieldRanger
Item 5 of the checklist is the record a lender reads, and it is produced by the job history rather than assembled for the application. In FieldRanger, revenue reports show job revenue and margin by customer or service type, recurring job templates hold maintenance contracts and repeat service calls, and each invoice is generated from the completed work order, with invoice and payment sync to QuickBooks. Technicians clock in and out with time logged against each job, so labor cost sits beside revenue on the same record. The visit itself is recorded against an HVAC maintenance checklist.
A won HubSpot deal becomes a job with its context carried over, so the sales pipeline and the completed work sit on one set of HubSpot records. The reporting page covers the reports a funding request draws on, and plans are listed on pricing, with Start free trial for 14 days and no card.
Frequently asked questions
What loans can an HVAC business get?
SBA 7(a) loans up to $5 million, SBA Express lines and loans up to $500,000, SBA microloans up to $50,000, 504 loans for long-life equipment and buildings, and conventional equipment or vehicle loans from banks and dealers.
What is the interest rate on an SBA loan for an HVAC company?
The lender sets it, under an SBA cap. At the 7.00% prime rate reported on November 11, 2026, the maximum variable rate is 13.50% for loans of $50,000 or less, 13.00% up to $250,000, 11.50% up to $350,000 and 10.00% above that.
How much is the SBA guaranty fee in fiscal 2027?
For loans longer than 12 months approved from October 1, 2026, it is 2% of the guaranteed portion up to $150,000 and 3% from $150,001 to $700,000, and 0% for loans of $700,000 or less to businesses in a rural area.
Can an HVAC company get an SBA loan for a van?
Yes. 7(a) loans cover machinery and equipment, with equipment maturities generally up to 10 years, and microloans cover equipment purchases up to $50,000.
What does a lender ask an HVAC company for?
SBA Lender Match lists a business plan, the amount and use of funds, credit history, financial projections, collateral and industry experience. SBA Form 1919 and a personal financial statement follow for SBA loans.
The sample's two requests differ by $30,000 and end $447.93 a month apart, a gap set by two SBA thresholds rather than by the van. An HVAC loan is sized against the fee bands and rate tiers first, then against the company's revenue by month, and the lender's quote is checked against the cap it cannot exceed.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo