Guide

Landscaping Timbers Prices:Treated, CCA and Untreated Timber Prices by Size, Pins and Delivery, and an Installed Price Build for a Missouri Bed Border

Landscaping timbers prices by size and treatment from three lumber yards, pin and delivery costs, and an installed price build for a two-course Missouri border.

By Published Updated

10 min read

Landscaping timbers prices on three lumber yards' pages read on November 13, 2026 run from $4.99 to $6.79 for an 8-foot treated timber, $39.99 for a treated 6 x 6, and $119.92 for an 8-foot untreated cedar 4 x 4. Installed as a sample two-course bed border in Lee's Summit, Missouri, the timbers are 13.5% of the job's cost.

A timber job is quoted wrong in predictable ways. The timbers are priced at the shelf price and the pins, the delivery and the cuts are left off. A two-course border is quoted at the rate for one. A homeowner asks for an untreated or cedar border and receives a price per timber that assumed treated pine, or a low wall is built from timbers too small for the soil behind them. FieldRanger makes landscaping software that runs inside HubSpot, and this page belongs to the pricing and quoting guides. It sets out timber sizes, treatments and retail prices, the uses timbers suit, the pin and delivery lines, an installed price build for a sample border, two material substitutions and a checklist.

Three terms carry the page. A landscape timber is a length of slabbed or rounded wood sold for edging, steps and low walls rather than for framing; each landscape timber priced below is pressure-treated pine. Nominal size is the name of a piece, such as 3 x 5; actual size is what it measures after surfacing and treatment, which is smaller. S4S, surfaced on four sides, describes square-edged lumber, the alternative to a slabbed timber where a flat, square face matters.

Landscape timber sizes, treatments and retail prices

Big-box retailers' pages could not be read for this guide on November 13, 2026, so the table uses three regional yards whose pages carry the price in the page itself: Sutherlands, read at its Harrisonville, Missouri store; HEP Sales, a yard based in Waterloo, New York; and Buchheit, read at its Herculaneum, Missouri store.

Landscape timber and timber-substitute prices by size and treatment (seller pages read November 13, 2026)
ProductSizeTreatmentPriceSeller
[8-foot treated landscape timber](https://sutherlands.com/products/item/10801/sutherlands-8foot-treated-landscape-timber)8 ft, slabbed two sides; actual size not statedPressure treated$4.99 eachSutherlands, 227 in stock at Harrisonville
[3 x 5 x 8 landscape timber, No. 2 Southern Pine](https://hepsales.com/3-x-5-x-8-southern-pine-no-2-pressure-treated-mca-landscape-timber)Typically 2-1/2 x 4-1/2 in actualMCA$6.79 eachHEP Sales
[Landscape timber 8', CCA](https://buchheits.com/p/landscape-timber-8-cca-pressure-treated-lumber)8 ftCCA$6.25, out of stockBuchheit
6 x 6 x 8, #2 S4S treated yellow pine8 ftTreated$39.99 each, $35.99 from 24 piecesSutherlands, shown on the timber page
6 x 6 x 10, No. 2 Southern Pine, S4S10 ftMCA .15$43.19 eachHEP Sales, shown on the timber page
[4 x 4 Western Red Cedar, D & Better, kiln dried, S4S](https://www.hepsales.com/4-x-4-x-linear-foot-western-red-cedar-d-better-kiln-dried-surfaced-on-4-sides/)Typically 3-1/2 x 3-1/2 inUntreated$14.99 a linear foot, or $119.92 for 8 ftHEP Sales
[4 x 4 x 8 White Fir, Premium, kiln dried, S4S](https://www.hepsales.com/4-x-4-x-8-white-fir-premium-kiln-dried-surfaced-on-4-sides/)Typically 3-1/2 x 3-1/2 inUntreated$26.99 eachHEP Sales

The spread inside one product is small and the spread between products is large. Treated 8-foot timbers differ by $1.80 across three sellers in two states. The step from a treated timber to a treated 6 x 6 multiplies the material by eight, and the step to untreated cedar of a smaller section multiplies it by 24.

Treated, CCA and untreated timbers

Treated pine is the default product, and the treatment named on the tag matters more than the word "treated" on the shelf. HEP Sales names micronized copper azole (MCA) on its timber; Buchheit's listing names chromated copper arsenate (CCA). The EPA states that "in December 2003, chromated arsenicals manufacturers voluntarily discontinued manufacturing chromated arsenicals-treated wood products for homeowner uses", and that CCA-treated or other preservative-treated wood should not be burned in a residential setting (EPA, chromated arsenicals, last updated December 22, 2025). A timber listed as CCA is therefore checked against its end tag before it goes into a vegetable bed or a play area, and offcuts of any treated timber go out with the job's debris rather than into a fire pit.

Untreated timber, in practice, means a different species. None of the three yards listed an untreated landscape timber. The untreated pieces they did list are square-edged lumber: Western Red Cedar at $14.99 a linear foot, and white fir at $26.99 for an 8-foot 4 x 4. Cedar is chosen for its appearance and for beds where the owner wants no preservative at all; white fir is a framing species and is priced here only to show what an untreated softwood costs in that size.

Landscape timbers in bed borders, steps and low walls

Timbers suit borders, edging and steps, and they are a poor fit for walls that hold back soil. The American Society of Home Inspectors' column on retaining walls states that pressure-treated wood in a wall "should be rated for ground contact (UC4A or better)", that the wood "should be at least about 3 inches by 5 inches", and that walls of about 4 feet or more need tiebacks and deadmen; it adds that the IRC requires an engineered design for walls taller than 4 feet (ASHI Reporter, The Word: Retaining Walls, November 1, 2019). A nominal 3 x 5 timber measuring 2-1/2 by 4-1/2 inches falls under that size, so the sample below is a raised bed border, not a wall. A wall is quoted in 6 x 6 or larger, with its use category read from the tag, or in stone, which the landscaping stone prices guide covers.

Pins and delivery as material lines

Each timber is pinned to the ground and to the course below, and the pins can cost more than the timbers. Sutherlands' Harrisonville store lists #4 rebar, 1/2 inch, at $4.39 for a precut 24-inch piece and $5.49 for a 10-foot bar (Sutherlands, #4 rebar 1/2 in x 24 in, 1/2-inch x 10-foot #4 rebar, read November 13, 2026). One 10-foot bar yields five 24-inch pins at $1.10 each, so cutting pins in the yard replaces $21.95 of precut pins with $5.49 of bar and the time to cut it.

Delivery is priced by distance. The same Sutherlands timber page lists local delivery within 150 miles of the Harrisonville store at a standard trip fee of $60.00 with 15 miles included, $4.00 a mile beyond, and a $60.00 minimum. A job 22 miles from the store, a sample distance, pays $88.00.

Installed price build for a two-course timber bed border in Lee's Summit, Missouri

The job is a sample: a 12 by 24-foot raised bed edged with two courses of 8-foot treated timbers, a 72-foot perimeter. Two courses take 18 timbers, and one spare covers cuts at the lapped corners. The bottom course is pinned with two 24-inch pins per timber and the top course with two more driven through both courses, 36 pins in all.

Labor is costed from Kansas City wages. Landscaping and groundskeeping workers in the Kansas City, MO-KS metro earned a median of $19.93 an hour in BLS 2025 wage data (O\*NET OnLine, Missouri wages for 37-3011.00, read November 13, 2026). The employer adds 7.65% for Social Security and Medicare (IRS Topic 751, updated November 9, 2026) and Missouri unemployment tax at the 2.376% new employer rate for 2026 and 2027 (Missouri Division of Employment Security, tax rates, read November 13, 2026). Workers' compensation at 6% of wages is a sample input, so the loaded rate is $23.12 an hour. Road miles are priced at the IRS business rate of 76 cents from July 1, 2026 (IRS, standard mileage rates, updated July 28, 2026).

The hours are sample inputs for a two-person crew: 4.0 labor hours to lay out and level the trench, 2.5 to cut and set the bottom course, 3.5 to set the top course and drill and drive the pins, 1.0 to backfill and clean up, 1.0 to cut the pins, and 1.0 of travel. Overhead at $9.00 a labor hour, equipment at $3.00 an on-site hour and the 22% target margin are sample inputs.

Installed price build, two-course treated timber border, 72 feet, Lee's Summit, Missouri (sample quantities and hours; prices and rates sourced)
LineCalculationAmount
Timbers19 × $4.99$94.81
Pins8 ten-foot #4 bars × $5.49, cut to 40 pins of 24 inches$43.92
Delivery$60.00 trip fee + 7 miles × $4.00$88.00
Labor13.0 labor hours × $23.12$300.56
Overhead13.0 labor hours × $9.00$117.00
Equipment: saw, drill and hammer drill12.0 on-site hours × $3.00$36.00
Crew truck30 miles × $0.76$22.80
Cost of the jobSum of the lines$703.09
Price at a 22% margin$703.09 ÷ 0.78$901.40
Per linear foot of border$901.40 ÷ 72$12.52
Per installed timber$901.40 ÷ 18$50.08

Labor and overhead are 59.4% of the cost; the timbers are 13.5%, and timbers, pins and delivery together 32.2%. Two decisions inside the build move it. Precut pins in place of cut bar save the cutting hour but add $114.12 of steel, raising the cost to $782.09 and the price to $1,002.68. Collecting the materials instead of paying for delivery adds two labor hours and 40 miles, costing $709.73, so the $88.00 delivery is the cheaper choice by $6.64. Sales tax on the materials is left out of the sample. The same cost-plus-margin method applied to mulch and fall cleanups is worked through in landscaping prices.

Material substitutions on the same border: treated 6 x 6 and untreated cedar

The customer's choice of material changes the price far more than any line above. Each row keeps the sample's hours, rates and margin and changes the timber only, except that the heavier 6 x 6 adds a sample two labor hours.

The Lee's Summit border built in three materials (sample hours and margin; prices from the seller pages above)
MaterialMaterial cost, 19 piecesCost of the jobPricePer linear foot
8-foot treated landscape timber, Sutherlands$94.81$703.09$901.40$12.52
6 x 6 x 8 treated S4S, Sutherlands$759.81$1,438.33$1,844.01$25.61
4 x 4 Western Red Cedar, 8 feet, HEP Sales$2,278.48$2,886.76$3,700.97$51.40

The cedar border is the smallest section of the three, 3-1/2 inches square, and it costs four times the timber border. The 6 x 6 doubles the price and gives a taller border with square faces. A written estimate shows the material by name, size and treatment, so that the price difference has a stated cause; the landscaping estimate template lists those fields.

Landscaping timber quote checklist

  1. Name the material on the quote: product, nominal and actual size, treatment and seller.
  2. Read the end tag before installation, and record the treatment and use category on the work order.
  3. Quote timbers for borders, edging and steps; quote a soil-retaining wall in 6 x 6 or larger, or in another material, and refer any wall near 4 feet for design.
  4. Count courses, pieces, spares and pins from the measured perimeter, not from the area.
  5. Price the pins both ways, precut and cut from bar, and keep the cheaper one.
  6. Compare the delivery fee for the job's distance with the labor hours and miles of a pickup.
  7. Build labor from the local median wage plus payroll taxes, unemployment tax and workers' compensation.
  8. Keep treated offcuts with the job's debris for disposal, never for burning.
  9. Verify after the job: compare recorded labor hours and pieces used with the estimate, and correct the hour figures for the next border.

Timber estimates, job hours and margin in FieldRanger

FieldRanger builds the estimate either from the HubSpot deal or contact record, without leaving HubSpot, or in FieldRanger, where it stays tied to the HubSpot deal. Estimates and agreements can be sent for signature through PandaDoc, and a won deal becomes a job with its context carried over. The drag-and-drop calendar assigns and reschedules the job, and auto-routing builds each technician's route for the day.

On the job, materials used are logged against it for job costing, job-level time tracking records the hours, and before and after photos attach to the work order. The invoice is generated from the completed work order, Stripe takes payment in the field, and QuickBooks syncs invoices and payments. Revenue reports show job revenue and margin by customer or service type, the comparison behind the checklist's last step. One FieldRanger job carries both members of the two-person crew. Each day is its own job, so a border that runs into a second day is scheduled as a second job. Plans are on pricing, where Start free trial runs 14 days with no card.

Frequently asked questions

How much do landscaping timbers cost?

On pages read November 13, 2026, an 8-foot treated landscape timber was $4.99 at Sutherlands, $6.25 for a CCA timber at Buchheit and $6.79 for a 3 x 5 x 8 MCA timber at HEP Sales. A treated 6 x 6 x 8 was $39.99 at Sutherlands.

How much does it cost to install landscape timbers?

In a sample two-course, 72-foot bed border in Lee's Summit, Missouri, the job costs $703.09 and prices at $901.40 at a 22% margin, or $12.52 a linear foot. Labor and overhead are 59.4% of the cost and the timbers 13.5%.

Are untreated landscape timbers available?

None of the three yards read listed one. Untreated alternatives are square-edged lumber, such as Western Red Cedar 4 x 4 at $14.99 a linear foot and white fir 4 x 4 x 8 at $26.99 at HEP Sales.

Can landscape timbers be used for a retaining wall?

Only for low walls built to a standard: ASHI's column calls for ground-contact wood rated UC4A or better and at least about 3 by 5 inches, with tiebacks and deadmen near 4 feet. A nominal 3 x 5 timber measures about 2-1/2 by 4-1/2 inches.

Are CCA landscape timbers safe for vegetable gardens?

The EPA states that manufacturers stopped making CCA-treated wood for homeowner uses in December 2003. A timber listed as CCA is checked against its end tag before it is used near food plants, and no treated wood is burned at home.

The Lee's Summit border shows where a timber quote is won or lost: $94.81 of timbers carry $300.56 of labor, and the customer who chooses cedar has chosen a $3,700.97 border before a single pin is driven.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo