Guide

Lawn Care Pricing:Cost Inputs, Per-Visit Method, Pricing Chart, Published Ranges and Fertilizer Rates

Lawn care pricing from cost inputs: mower acres per hour, loaded labor, drive time and overhead per hour, a pricing chart by lot size and published ranges.

By Published Updated

13 min read

Lawn care pricing sets a price per cut, per visit or per season from the cost of the work: the minutes a mower needs for the turf, the minutes spent trimming and driving, the crew's loaded wage, the mower's cost per hour and the overhead each route hour carries. A profit margin is then added on top of that cost.

Prices set without that arithmetic fail in a pattern. A flat price per lawn earns on small lots and loses on large ones. Overhead divided evenly per cut charges a quarter-acre lot for the time a one-acre lot consumes. A 15% markup is mistaken for a 15% margin. This guide is one of the pricing and quoting guides from FieldRanger, and the lawn care business software page covers running the accounts it prices. It starts with the five cost inputs and the per-visit method, builds a pricing chart by turf size and sets it beside a published market range. It then prices fertilizer visits per 1,000 square feet and per acre, covers commercial and monthly pricing, and closes with the pricing mistakes, a checklist and the software question. The lawn mowing business guide compares mower types on a small and a large lot; this guide adds overhead and profit to the price.

Three terms carry the method. The loaded labor rate is the hourly wage plus payroll taxes and benefits. The overhead rate is the year's fixed costs, such as insurance, phones, software and marketing, divided by the route hours the crew works. Margin is profit as a share of the price; markup is profit as a share of the cost, and the two are different numbers for the same job.

Lawn care pricing inputs

Five inputs set the cost of a visit, and each has a published source or a measured value.

Mower productivity. Exmark publishes the formula: miles per hour times width of cut in inches, divided by 124, gives acres per hour at 80% efficiency, which Exmark considers more representative of actual mowing because it allows for turns and overlap. Its chart gives 0.87 acre an hour for a 36-inch deck at 3 mph, 1.16 for a 48-inch deck and 1.74 for a 72-inch deck at the same speed (Exmark productivity chart, checked November 12, 2026).

Labor. The May 2025 median wage for grounds maintenance workers was $19.27 an hour (BLS). Wages are 70.0% of employer compensation cost in private industry, with benefits the other 30.0% (BLS Employer Costs for Employee Compensation, June 2026). Dividing the wage by 0.700 gives a loaded rate of $27.53 an hour.

Drive time and mileage. Minutes between lawns are paid at the labor rate, and miles at the IRS business rate of 76 cents a mile from July 1, 2026 (IRS).

Mower cost per hour. Exmark lists the Turf Tracer S-Series walk-behind, with decks from 36 to 52 inches, at a cash price of $9,199 (Exmark Turf Tracer, checked November 12, 2026). Spread over a sample 750 mowing hours (three seasons of 250 hours), it costs $12.27 per mowing hour.

Overhead per route hour. Insureon's lawn care figures are $685 a year for general liability, $503 for tools and equipment cover and $3,062 for commercial auto (Insureon, updated September 28, 2026). With a sample $6,000 for phone, software, marketing and office costs, overhead is $10,250 a year. Over a sample 700 route hours, the overhead rate is $14.64 per hour.

Per-visit pricing method

How to calculate lawn care pricing for one account, in order:

  1. Measure the turf area, excluding the house, drive and beds, and convert it to acres (square feet ÷ 43,560).
  2. Divide the acres by the mower's acres per hour from the Exmark chart to get mowing minutes.
  3. Add the minutes for trimming, edging and blowing, for unloading and loading, and for the drive from the previous lawn.
  4. Multiply the total minutes by the loaded labor rate and by the overhead rate.
  5. Multiply the mowing minutes alone by the mower's cost per hour, and add the drive miles at the IRS rate.
  6. Sum the lines to get the cost of the visit.
  7. Divide the cost by one minus the target margin. At a 15% margin, the price is the cost ÷ 0.85.
  8. Verify after four weeks of service: recorded minutes per visit against the minutes in step 3, and the price adjusted where they differ.

Overhead and labor both follow the clock in this method. A lot that takes three times as long carries three times the overhead, which is the point of an hourly overhead rate.

Lawn care pricing chart by turf size

The chart applies the method to four lots with a 36-inch walk-behind at 3 mph. Trimming minutes, the 3 minutes of unloading, the 8-minute drive and 3 miles per visit are sample inputs; the rates are those listed above. The first table shows the lines for one lot, and the right-hand column of the second is the published market range described in the next section.

Sample cost of one visit, 10,000 square feet of turf (0.23 acre), 36-inch mower
LineCalculationAmount
Labor38.8 minutes (15.8 mowing, 12 trimming, 3 loading, 8 driving) × $27.53 an hour$17.82
Overhead38.8 minutes × $14.64 an hour$9.48
Mower15.8 mowing minutes × $12.27 an hour$3.24
Mileage3 miles × $0.76$2.28
Cost per visitSum of the lines$32.82
Price at a 15% margin$32.82 ÷ 0.85$38.61
Sample lawn mowing pricing chart, 36-inch mower, 15% target margin
Turf areaMinutes per visitCost per visitPrice at 15% marginLawnStarter range, October 2026
7,500 sq ft (0.17 acre)32.9$27.81$32.72$41 to $61 (up to 1/4 acre)
10,000 sq ft (0.23 acre)38.8$32.82$38.61$41 to $61 (up to 1/4 acre)
20,000 sq ft (0.46 acre)57.7$49.28$57.98$49 to $69 (1/4 to 1/2 acre)
43,560 sq ft (1 acre)102.0$88.04$103.58$59 to $114 (1/2 to 1 acre)

Trimming takes a sample 10, 12, 15 and 22 minutes on the four lots, and every lot carries the same 11 minutes of loading and driving. The chart is free to copy into a price sheet, and it is only as good as its minutes: the trimming and drive times are where one route differs from another. Each additional 2,500 square feet adds 4.0 mowing minutes on this mower, or $3.59 at the labor, overhead and mower rates, before any extra trimming. A chart built for a 48-inch deck at 1.16 acres an hour cuts the mowing minutes by a quarter, so a chart belongs to a mower as well as to a route.

Published prices for lawn mowing services

Market ranges show what customers pay; they do not show what a visit costs. LawnStarter, a lawn care booking platform, reports prices on its platform of $44 to $71 per visit, averaging $57, with $32 to $68 an hour and $0.01 to $0.06 a square foot. By lot size, its ranges run from $41 to $61 up to a quarter acre, $49 to $69 from a quarter to half an acre, $59 to $114 from half an acre to one acre and $99 to $264 from one to two acres (LawnStarter, updated November 4, 2026, data labeled October 2026).

Set beside the chart, the comparison says something specific. On the two small lots, the cost-based price sits below the published range, so an operator charging inside the range earns more than the 15% target on those lots. On the half-acre and one-acre lots, the cost-based price sits inside the range. The range is a ceiling and a sales argument; the cost column is the floor, and a price below it loses money at any volume.

Fertilizer and treatment pricing per 1,000 square feet and per acre

Treatment visits are priced by area, because the material scales with square feet and the application takes minutes rather than an hour.

Nitrogen sets the material quantity. Purdue Extension's schedule for established cool-season lawns lists total annual nitrogen of 2 to 4 pounds per 1,000 square feet for moderate maintenance, with per-application rates up to 1 pound and higher autumn rates split into two or more applications (Purdue Extension AY-22, page modified May 27, 2026).

Urea is 46% nitrogen, so 1 pound of nitrogen per 1,000 square feet takes 2.17 pounds of urea, or 94.7 pounds an acre. The Illinois Production Cost Report put distributor urea at an average of $770 a ton for the week ending October 30, 2026 (USDA AMS, Illinois Production Cost Report). At that price, the nitrogen costs $0.84 per 1,000 square feet and $36.46 an acre per application. That is a bulk agricultural price for uncoated urea; bagged slow-release turf fertilizers cost more per pound of nitrogen, so the supplier's price replaces it in a real quote.

A sample fertilizer visit to the 10,000-square-foot lot above, with 10 minutes of spreading and the 8-minute drive, costs $8.26 of labor, $4.39 of overhead, $8.37 of urea and $2.28 of mileage. The cost is $23.30, and the price at a 15% margin is $27.41. Weed and insect control add pesticide licensing in states that license commercial application, which the guide to starting a lawn care business sets out.

Organic lawn care pricing changes the material line most. Natural-source products carry less nitrogen per pound: Milorganite is 6-4-0, guaranteeing at least 6% nitrogen (Milorganite FAQ), and its schedule calls for one 32-pound bag per 2,500 square feet, four times a year (Milorganite rates and schedule). That is 12.8 pounds of product per 1,000 square feet delivering 0.77 pound of nitrogen, against 2.17 pounds of urea for a full pound. On the 10,000-square-foot lot, each application moves 128 pounds of product instead of 22, so loading, refilling and spreading minutes rise along with the material price.

Commercial lawn care pricing per acre

Commercial lawn care pricing is quoted per acre or per visit for the whole site, and the deck width decides the hours. On a five-acre office campus, the chart's 1.74 acres an hour for a 72-inch deck at 3 mph gives 2.87 mowing hours, and its 1.45 acres an hour for a 60-inch deck gives 3.45 hours. The per-acre price follows the same method as the chart: mowing hours, plus trimming and blowing hours for the crew, at the labor and overhead rates, plus the mower's hourly cost, divided by one minus the margin.

Commercial accounts add terms that residential lawns do not: a bid for a season or a year, a written scope of visits and services, a certificate of insurance before the first cut, and payment on invoice terms. The certificate's limits come from the contract, and a higher limit than the Insureon medians above changes the overhead rate for every hour on the route.

Monthly and seasonal lawn care service pricing

The best lawn care pricing structure is the one that matches the account's cost and the customer's billing preference, and three are in use.

A per-visit price charges each cut as it happens and suits accounts that skip weeks in drought. A seasonal price is the per-visit price times the planned visits, quoted once for the year. A monthly installment divides the seasonal price into equal payments: the 10,000-square-foot lot at $38.61 a cut for a sample 30-week season is $1,158.30, or $144.79 a month over eight months. The monthly form smooths cash flow but needs a written rule for skipped visits and early cancellation, or the business finances the customer's late-season cuts.

Each structure ends as a lawn care invoice: per visit with the date and service, or per month with the visits completed listed beneath. The lawn care invoice template shows both layouts.

Lawn care pricing mistakes

Each mistake below has a mechanism that shows up in the chart.

  • Overhead divided per cut. Spread evenly over a sample 1,000 cuts, the same $10,250 of overhead charges $10.25 to every lot. The one-acre lot consumes $24.88 at the hourly rate and the 7,500-square-foot lot $8.02, so a per-cut split underprices the large lot by $14.63 a visit and overprices the small one by $2.23.
  • Markup taken for margin. A 15% markup on the $32.82 visit gives $37.74, which is a 13.0% margin. Dividing by 0.85 gives $38.61 and the 15% intended.
  • A price copied from a market range. The LawnStarter range sits above cost on small lots and close to it on large ones; copying the top of one band onto every lot repeats the flat-price problem.
  • Drive minutes left out. In the chart, the 8-minute drive and its 3 miles cost $7.90 a visit at the labor, overhead and mileage rates. A scattered route doubles that line without changing a single lawn.
  • The owner's hours unpriced. An owner who mows without paying himself or herself a wage at the loaded rate is pricing below the chart, and the difference becomes visible when the first employee is hired.
  • A mower mismatched to the lots. The lawn mowing business guide shows the same small lot costing nearly the same on a walk-behind and a zero-turn, and a large lot costing $17.89 less per cut on the zero-turn.

Cost of starting a lawn care business

The pricing inputs double as the start-up budget. The mower is the largest purchase, and Exmark's published cash prices include $1,999 for its 21-inch Commercial 21 X-Series walk-behind (Exmark Commercial 21) and $9,199 for the Turf Tracer S-Series above. Insurance from the Insureon figures adds $1,188 a year for liability and equipment cover before any vehicle policy. Registration, licensing and a costed first season are set out in the guide to starting a lawn care business, and the channels that fill a new route are covered under lawn care marketing.

Lawn care price sheet checklist

  • Turf area measured for every account and stored with the account
  • Mower and deck width recorded, with acres per hour from the Exmark chart
  • Loaded labor rate calculated from the wage actually paid
  • Overhead rate per route hour recalculated each season from the year's fixed costs
  • Mower cost per mowing hour from its price and expected hours
  • Price per visit = cost ÷ (1 − target margin), never cost × (1 + markup) when a margin is the goal
  • Fertilizer priced per 1,000 square feet from the nitrogen rate and the supplier's price
  • Season and monthly prices derived from the per-visit price, with skip and cancellation rules in writing
  • Minutes per visit recorded for the first month and compared with the chart

Estimates and margin reports in FieldRanger

A price sheet is a set of assumptions until the route measures them. FieldRanger records those measurements against jobs that start as HubSpot deals. An estimate is built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and tied to the HubSpot deal, and PandaDoc can send it for signature; the estimating page shows the estimate record. A won HubSpot deal becomes a job with its context carried over, and each weekly or fortnightly account sits on a recurring job template.

FieldRanger builds each technician's route for the day automatically. Technicians clock in and out with time logged against each job, so the minutes column in the chart becomes recorded data for every lot. The invoice is generated from the completed work order, payment can be taken through Stripe, and invoices and payments sync with QuickBooks. Revenue reports show job revenue and margin by customer or service type, which is where an account priced below its cost appears. Start free trial gives 14 days with no card, and the plans sit on pricing.

Frequently asked questions

How to calculate lawn care pricing?

Convert the turf area to acres, divide by the mower's acres per hour to get mowing minutes, add trimming, loading and drive minutes, and multiply the total by the loaded labor rate and an overhead rate per hour. Add the mower's hourly cost and mileage, then divide by one minus the target margin.

What is the best lawn care pricing method?

A per-visit price built from measured turf area and an hourly cost rate, then converted to a seasonal or monthly price if the customer prefers. A flat price per lawn earns on small lots and loses on large ones, because mowing minutes rise with area.

How much to charge for lawn mowing?

Enough to clear the cost of the visit and the target margin. In this guide's sample with a 36-inch mower, a 10,000-square-foot lot costs $32.82 per visit and prices at $38.61 for a 15% margin. LawnStarter reported $41 to $61 for lots up to a quarter acre in October 2026.

How is commercial lawn care priced?

Per acre or per site visit, from mowing hours at the deck width used, crew hours for trimming and blowing, and the hourly labor and overhead rates. At the 1.74 acres an hour Exmark's chart gives a 72-inch deck at 3 mph, a five-acre site takes 2.87 mowing hours.

What does lawn fertilizer cost per acre?

At the USDA-reported Illinois urea price of $770 a ton for late October 2026, one pound of nitrogen per 1,000 square feet costs $36.46 an acre per application, or $0.84 per 1,000 square feet. Bagged slow-release and organic products cost more per pound of nitrogen.

Why does organic lawn care cost more?

Organic and natural-source fertilizers carry less nitrogen per pound. Milorganite at 6% nitrogen is applied at 12.8 pounds per 1,000 square feet, against 2.17 pounds of urea for a full pound of nitrogen, so each visit moves more product and takes more spreading time.

Is there a free lawn care pricing chart?

The chart in this guide is free to copy. It lists cost and price per visit for four lot sizes with a 36-inch mower, and its minutes, wage and overhead rates should be replaced with the business's own figures.

The chart's last row carries the warning in this subject: the one-acre lot costs $88.04 a visit, and a price set per cut rather than per hour charges it as if it were small. The lawn care business software page covers recurring accounts on HubSpot, the pricing and quoting guides collect the other trades' methods, and a season of measured visits can start on a 14-day trial listed on pricing.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo