Guide

Truck Parts Inventory for a Service Fleet:Maintenance Parts by Mileage, Inspection-Called Wear Parts, the Stock-or-Order Test, FMCSA Records, Tire Date Codes and Tax Treatment

Truck parts inventory for a service fleet: quantities from mileage, a stock-or-order test for failure parts, FMCSA records and the tax rule for spare parts.

By Published Updated

12 min read

Truck parts inventory, for a service company, is the stock of parts kept to maintain and repair its own vans and trucks: filters, wiper blades, brake pads, tires, batteries, belts and the occasional alternator. Quantities come from fleet mileage and inspections, a stock-or-order test decides the failure parts, and each part used is recorded against the vehicle it went on.

A fleet without a parts record fails in a pattern. A van is due for an oil change and no filter for its engine is on the shelf, so the change slips a week. A battery dies at a job site at 7:40 in the morning and the technician waits for a store run while two calls move to the afternoon. An alternator is replaced under the parts store's warranty, the old one is never returned, and the core deposit is lost. This guide is one of the guides for service business owners. It separates fleet parts from van stock, sorts the parts into three demand classes and sizes each, sets out a stock-or-order test for failure parts, and covers cores, warranty and rotable parts. The federal maintenance records, tire date codes and the tax rule for spare parts follow. It closes with a sample twelve-van fleet in Des Moines, Iowa, a checklist and the software record.

Four terms carry the guide. A preventive maintenance (PM) interval is the mileage or time at which a scheduled service falls due. A core is the used part returned to the seller when a part such as a battery or alternator is replaced; the core charge is the deposit refunded on its return. A rotable part is a spare that can be removed from one vehicle, repaired and installed on another. Downtime here is the hours a technician is paid while the vehicle that carries the job cannot run.

Fleet maintenance parts, van stock and parts for sale

The phrase covers three different stocks, and each has its own record. Van stock is the parts a technician fits on customers' jobs; it is invoiced to the customer and managed through par levels, the subject of truck inventory. Parts for sale are a parts dealer's inventory, held for customers who repair trucks. Fleet maintenance parts are bought to keep the company's own vehicles running; they are never invoiced to a customer, and their cost belongs to the vehicle.

Fleet maintenance parts, van stock and dealer parts compared
StockWhere its cost goesRecord that controls it
Fleet maintenance partsThe vehicle, as a fleet expensePart used, by vehicle and odometer reading
Van stockThe customer's job, through the invoicePar levels and parts used per job
Dealer parts for saleCost of goods sold for the dealerInventory by part number and location

A fleet parts shelf in the same building as the parts warehouse is still kept on a separate record. A filter checked out for a van and a fitting checked out for a job leave the same room; only the first is a fleet cost. The warehouse inventory guide covers the checkout record both stocks share.

Three demand classes: scheduled, inspection-called and failure parts

Fleet parts fall into three classes by how their demand can be known. The class decides how each part is bought and how much is held.

Scheduled parts are replaced at a PM interval: oil filters, engine and cabin air filters, wiper blades and fluids. Their annual quantity is fleet miles divided by the interval, and they can be bought in kits per vehicle model ahead of the due date.

Inspection-called parts wear at a rate that a measurement reveals before failure: brake pads by thickness, tires by tread depth and age, batteries by a load test. Their quantity is forecast from inspection readings, and the purchase is triggered when a reading crosses the company's replacement point.

Failure parts give no reliable warning: alternators, starters, belts, sensors and compressors. Their demand is a count of past failures in the maintenance history, and the decision to hold one on the shelf is a cost test, not a forecast.

Scheduled maintenance parts from fleet mileage

Scheduled quantities follow from two numbers per vehicle model: annual miles and the interval the manufacturer's maintenance schedule sets. A fleet of one van model with one interval needs one calculation; a mixed fleet needs one per model and engine, because filters and intervals differ between them.

The calculation is rounded up and placed on the PM calendar, not left on the shelf. A fleet that knows twelve vans will each need close to three oil changes in the year orders filters in batches ahead of the due dates and holds a small buffer for the van that reaches its interval early.

Wear parts called by inspection: brake pads, tires and batteries

Inspection-called parts are bought from readings, so the inspection record is the forecast. A pad thickness, a tread depth and a battery test result recorded at each PM visit show which vans will need parts before the next visit, and the order follows the reading.

Tire age is read from the sidewall. Federal rules require the tire identification number to end in a date code of four numerical symbols that "must identify the week and year of manufacture", with the first two symbols giving the week (49 CFR 574.5, via Cornell LII, checked November 13, 2026). A tire marked 2224 was made in the twenty-second full calendar week of 2024. Recording the code when a tire is mounted, and checking it when tires are bought for the shelf, keeps an old tire from going onto a van as new stock.

Failure parts and the stock-or-order test

A failure part is worth holding when the downtime it saves in a year exceeds the cost of holding it. Holding cost is the part's price times a carrying rate that covers capital, space, damage and obsolescence. Downtime saved multiplies three figures: failures a year, from the maintenance history; the hours the shelf saves on each failure; and the technician's loaded hourly cost. The test counts only the paid hours; the revenue from the calls that moved is a further cost it leaves out.

Sample stock-or-order test for four failure parts (sample prices, failure counts, hours and a sample 25 percent carrying rate; loaded rate from BLS data, sourced below)
PartSample costHolding cost a yearDowntime saved a yearDecision
Alternator$320$80.002 failures × 5 hours × $51.54 = $515.40Hold one
Serpentine belt$45$11.251 failure × 3.25 hours × $51.54 = $167.51Hold one
Battery$230$57.501 failure × 2.5 hours × $51.54 = $128.85Hold one
Van air conditioning compressor$650$162.500.2 failures × 8 hours × $51.54 = $82.46Order on demand

The compressor line shows the other outcome. A part that fails once in five years, in the sample history, costs more to hold than the downtime it would save, so it is ordered when it fails. The test is rerun each year from the maintenance history, since a new vehicle model or an aging fleet changes the failure counts.

Cores, warranty returns and rotable parts

A core is money on the shelf until it is returned. A battery, alternator or starter bought with a core charge carries a deposit that the seller refunds when the old part comes back, so the parts record lists every core outstanding with the seller, the purchase date and the amount. A core that sits in a van for two months is a deposit the company has paid and not reclaimed.

Warranty returns need the same record. A replacement part that fails within the seller's warranty term is returned against the original receipt, and the receipt can only be found if the part used was recorded against the vehicle with its purchase date. Rotable parts, such as a spare alternator kept to swap in while the failed one is rebuilt, move between vehicles, so their record follows the part's serial number as well as the vehicle.

Maintenance records under 49 CFR 396.3 and driver vehicle inspection reports

Vehicles that meet the federal commercial motor vehicle definition, the 10,001-pound line set out in the truck inventory guide, fall under Part 396 of the motor carrier safety rules. Every motor carrier must "systematically inspect, repair, and maintain" the vehicles it controls. For each vehicle controlled for 30 consecutive days, the records must include the vehicle's identification, "a means to indicate the nature and due date of the various inspection and maintenance operations to be performed", and "a record of inspection, repairs, and maintenance indicating their date and nature." The records are kept for one year where the vehicle is housed or maintained, and for six months after it leaves the carrier's control (49 CFR 396.3, amended July 21, 2026).

Two further rules connect inspections to parts. A driver prepares a written report at the end of each day's work listing any defect that would affect safe operation or "result in its mechanical breakdown"; no report is required if none is found. The carrier repairs a listed safety defect before the vehicle runs again, certifies the repair on the report and keeps the report for three months (49 CFR 396.11). Each vehicle must also pass a periodic inspection at least once in the preceding 12 months, with documentation on the vehicle (49 CFR 396.17). A parts record that lists part, vehicle, odometer reading and date supplies the "date and nature" of each repair the first rule requires, for vans inside the definition and as a working standard for those below it.

Fleet parts as materials and supplies for tax purposes

Parts bought to maintain the company's own vans are not inventory held for sale. Treasury Regulation 1.162-3 defines materials and supplies as tangible property "used or consumed in the taxpayer's operations that is not inventory", including "a component acquired to maintain, repair, or improve a unit of tangible property" the taxpayer owns, and any unit of property costing "$200 or less" (26 CFR 1.162-3, via Cornell LII).

The timing of the deduction turns on the record. Non-incidental materials and supplies are deductible in the year they are "first used in the taxpayer's operations or are consumed". Incidental materials and supplies, carried on hand with no record of consumption kept, or without physical inventories at the start and end of the year, are deductible when paid, "provided taxable income is clearly reflected." Rotable and temporary spare parts have their own rules in the same section, including an election to capitalize and depreciate them. Which treatment a company uses is a decision for its accountant; the parts record is what lets the accountant choose. Inventory held for resale, such as van stock invoiced to customers, follows the rules covered in the warehouse inventory guide.

Sample fleet: twelve plumbing vans in Des Moines, Iowa

The figures below are sample inputs for a hypothetical plumbing company with twelve vans of one model, each driven a sample 22,000 miles a year, for 264,000 fleet miles. Intervals and prices are sample inputs, not a manufacturer's schedule or a supplier's price list; the loaded rate is published data. The median wage for plumbers, pipefitters and steamfitters in Des Moines-West Des Moines is $36.08 an hour (O*NET, Iowa wages, BLS 2025 wage data), and wages and salaries were 70.0 percent of private industry compensation in the second quarter of 2026 (BLS series CMU2020000000000P), so a downtime hour costs $51.54.

Sample annual fleet parts use for twelve vans at 22,000 miles each (sample intervals and prices)
PartSample intervalUnits a yearSample cost a year
Oil filter7,500 miles36 (35.2 rounded up)$324 at $9
Engine air filter30,000 miles9 (8.8)$252 at $28
Cabin air filter20,000 miles14 (13.2)$308 at $22
Wiper blade pairTwice a year24$960 at $40
Front brake pad set40,000 miles, by inspection7 (6.6)$455 at $65
Tire50,000 miles a set of four, by inspection22 (21.1)$4,620 at $210
BatteryFour-year life, by load test3$690 at $230
Total$7,609

The scheduled and inspection-called parts come to $7,609 in the sample year, and tires are $4,620 of it, 60.7 percent. The failure-part test in the earlier table adds an alternator, a belt and a battery to the shelf for $148.75 a year in holding cost, against $811.76 of downtime those three parts save in the sample history. The tire line is where a purchasing decision moves the total, and the battery line is the one where a test reading, recorded at each PM visit, decides whether the purchase is planned or made at a job site.

Truck parts inventory checklist

  • Fleet parts kept on a separate record from van stock and from parts for sale.
  • Every vehicle listed by unit number, make, serial number or VIN, year, engine and odometer reading.
  • PM intervals recorded per vehicle model and engine, from the manufacturer's schedule.
  • Scheduled part quantities computed from fleet miles and ordered ahead of due dates.
  • Pad thickness, tread depth, tire date codes and battery test results recorded at each PM visit.
  • Stock-or-order test run each year for failure parts from the maintenance history.
  • Every part used recorded against the vehicle, with the date and odometer reading.
  • Cores outstanding listed by seller, date and deposit, and returned within the seller's terms.
  • Warranty parts traceable to the original receipt.
  • Driver inspection reports with defects repaired, certified and kept for three months, where Part 396 applies.
  • Parts consumption records kept for the accountant's materials and supplies treatment.

Fleet and parts records in FieldRanger

FieldRanger keeps fleet records beside the job records. Maintenance scheduling sends reminders for oil changes, inspections and repairs, and maintenance history holds service records for every vehicle. Mileage tracking logs odometer readings for expense reports and IRS mileage records. Digital pre-trip and post-trip inspection checklists record what each driver finds, and fleet alerts flag speeding, geofence exits and idle time. Vehicle assignment records which van each technician drives. The fleet management software page shows the vehicle record.

On the inventory side, technicians check parts and materials out of a specific warehouse, so stock is counted where it sits, and inventory alerts give low-stock warnings and reorder reminders; the warehouse inventory management software page shows the checkout. Parts and materials used on each job are logged against it for job costing. A shop still counting parts on paper can start from the warehouse inventory tracking spreadsheet, which sets out stock by location with reorder points.

Frequently asked questions

What is truck parts inventory?

For a service company, it is the stock of parts kept to maintain and repair its own vehicles: filters, wiper blades, brake pads, tires, batteries, belts and selected failure parts. It is separate from van stock, which is fitted on customers' jobs, and from a parts dealer's inventory held for sale.

How many spare parts should a service fleet keep?

Scheduled parts are sized from fleet miles divided by the service interval. Wear parts are bought from inspection readings. A failure part is held only when the downtime it saves in a year, at the technician's loaded hourly cost, exceeds its holding cost.

How long must truck maintenance records be kept?

For commercial motor vehicles under 49 CFR 396.3, the inspection, repair and maintenance records are kept for one year where the vehicle is housed or maintained and for six months after the vehicle leaves the carrier's control. Driver vehicle inspection reports are kept for three months.

How is the age of a tire read?

From the last four digits of the tire identification number on the sidewall: the first two give the week of manufacture and the last two the year, so 2224 means the twenty-second full calendar week of 2024.

Are spare parts for company vehicles inventory for tax purposes?

Parts bought to maintain the company's own vehicles are materials and supplies under Treasury Regulation 1.162-3, not inventory held for sale. They are deducted when used, or when paid if no consumption record is kept; the company's accountant chooses the treatment.

The alternator on the shelf and the compressor that is not

Twelve vans in Des Moines use $7,609 of scheduled and inspection-called parts in the sample year. Three failure parts earn their shelf space, saving $811.76 of paid downtime for $148.75 of holding cost, and the air conditioning compressor does not. Writing those decisions down, with every part recorded against the vehicle it went on, is the whole of a truck parts inventory. Van stock for customers' jobs follows its own par levels in truck inventory; the wider set of guides for service business owners covers the warehouse beside it. Trial accounts last 14 days and ask for no card (pricing).

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo