Guide
Warehouse Inventory Labels:Code 128 and GS1-128 Formats, Location Label Types, Polyester and Thermal Media, Printer Choice and a Bin Numbering Scheme with Check Digits
Warehouse inventory labels: Code 128 and GS1-128 formats, bin and beam labels, polyester and thermal media, printer choice and bin numbering with check digits.
Warehouse inventory labels identify a stock location or an item with a code people can read and scanners can decode. A service company's parts room needs three things from them: a barcode format its scanners read, a label material that outlasts the shelf, and a numbering scheme that puts each bin in walking order and catches a mistyped code.
Labels fail slowly and then all at once. A direct thermal paper label on a bin near a window darkens until the code no longer scans, and technicians start typing part numbers by hand. A company prints its own bin codes with an FNC1 character because the label software offered "GS1-128", and the scanner app tries to read a bin number as a GS1 element string. A shelf is re-slotted, half the labels move and half do not, and two bins share a code. This guide is one of the guides for service business owners. It covers barcode formats for internal labels, the label types a parts room uses, label materials and ribbons, direct thermal and thermal transfer printers with prices, a bin numbering scheme with a check digit, a sample label run for a Des Moines parts room, and a checklist.
Four terms are used precisely. A symbology is a barcode's encoding rules, such as Code 128 or QR Code. A location label identifies a place, such as a bin, shelf or rack level; an item label identifies a part or a carton. The X-dimension is "the specified width of the narrowest element in a barcode symbol", in GS1's words. A quiet zone is the blank margin a scanner needs on each side of a linear barcode.
Code 128, GS1-128 and the label a company prints for itself
Code 128 and GS1-128 look the same on a shelf and mean different things to a scanner. GS1's Logistic Label Guideline states that "GS1-128 is a special version or subset of Code 128", and that "GS1-128 barcodes must be distinguished from Code 128 barcodes by the use of the special Function 1 character (FNC1) after the start character." Each data field in a GS1-128 barcode "is preceded by a GS1 Application Identifier (AI)", which identifies the meaning and format of the data (GS1 Logistic Label Guideline, Release 1.3, ratified July 2019, read November 13, 2026).
The distinction decides what a parts room prints. A bin code such as 04-12-3-03 is the company's own data, not a GS1 element string, so it is printed as plain Code 128, with no FNC1, or as a QR code. Printing it as GS1-128 tells every scanner that the first digits are an Application Identifier, which they are not. GS1 symbols belong on what suppliers ship: for the Global Trade Item Number (GTIN) on cartons and outer cases the guideline names ITF-14, EAN/UPC or, "when additional item data is needed, a GS1-128 barcode", and states that such labels, "when not containing an SSCC, are not considered to be GS1 Logistic Labels." What a scanner must read, and the 1D and 2D choice, is covered in barcode scanner for warehouse inventory.
GS1 does offer identifiers for places. Its Global Location Number "can be used by companies to identify their locations, giving them complete flexibility to identify any type or level of location required" (GS1, Global Location Number). A GLN is useful where trading partners must refer to the location, such as a receiving dock named on a supplier's delivery. A bin that only the company's own technicians visit needs only the company's own code.
GS1 label dimensions as a reference for internal labels
Internal labels are outside GS1's rules, but the normative rules for logistic labels are a tested starting point for print settings. The guideline sets these for GS1-128 on logistic units:
| Rule | GS1 value | Use on a bin or beam label |
|---|---|---|
| X-dimension | 0.495 mm (0.0195 in) to 0.94 mm (0.0370 in), target 0.495 mm | A starting point; a wider X reads from farther away |
| Bar height | At least 31.75 mm (1.250 in), excluding the human-readable text | Not reachable on a 1-inch label; internal labels use a lower bar |
| Quiet zones | At least 10 X-dimensions each side | Applies to any linear barcode the scanner must read |
| Human-readable text | At least 3 mm high, clearly legible | Larger on location labels read from the aisle |
| Label size | A6 or 4 x 6 inch compact; A5 or 6 x 8 inch large | Pallet and carton labels only |
| Placement on pallets | Barcode between 400 mm (16 in) and 800 mm (32 in) from the base | Receiving reads supplier pallets at that height |
Two rules carry over without change. The guideline notes that an X-dimension at the higher end of the range "can support consistent scanning when the barcode might be used in challenging application environments (e.g., freezing can degrade print quality)", and the 10X quiet zone applies to any linear code. A 3 x 1 inch bin label holds a short Code 128 at a modest X-dimension only if the code itself is short, which is a reason to keep bin codes to a fixed handful of characters.
Location label types in a parts room
A parts room uses four kinds of location label, each read from a different distance:
- Bin face labels sit on the front of a bin or drawer and carry the bin code, its barcode or QR code, and the part number stocked there. They are read at arm's length during a pick or a count.
- Shelf edge and beam labels sit on the shelf lip or rack beam under each position. Where several levels share one beam face, a label per level with an arrow pointing up or down shows which shelf the code belongs to.
- Aisle and bay signs hang at the end of each aisle or above each bay and carry only the large human-readable aisle or bay number, for walking, not for scanning.
- Floor labels mark staging areas and bulk positions where no rack exists, and need a material rated for foot and cart traffic.
The label stays with the location, and the part moves. When a bin is re-slotted, the bin label keeps its code and the inventory record changes the part stored there; relabelling the bin with the new part's number breaks every count sheet sorted by location. How a location code becomes a field in the inventory record is set out in warehouse inventory tracking.
Label materials: polyester, paper and topcoats
The material follows from how long the label must last and what it faces. TSC, a printer maker, sets out the two print methods (TSC Printers, thermal labels, read November 13, 2026). Direct thermal materials "are printed using heat": a chemical reaction darkens the label under the printhead, the image "darkens over time with exposure to light or high temperatures", and the coating "is sensitive to environmental factors such as chemical contact, humidity, UV exposure and abrasion." A clear topcoat "acts as a barrier", and topcoated direct thermal is described as best for labels subjected to abrasion, sunlight, moisture or light chemical contact. Thermal transfer "uses a ribbon with heat-sensitive ink", melting "a wax-based or resin-based ink onto the media", and "different face stock and ribbon combinations can provide smudge, scratch, and chemical resistance."
For a permanent bin or beam label the combination is a synthetic face stock with a resin ribbon. POSGuys' listing for Zebra's Z-Ultimate 3000T and 4000T labels describes "a gloss coated polyester facestock with a high-performance permanent acrylic adhesive", 2.0 mil thick, for which "a resin ribbon is required", with Zebra's 6200, 5095 or 5100 resin ribbons recommended and a pretest of "the complete label, ribbon and printer combination in the intended application" (POSGuys, Zebra Z-Ultimate 3000T and 4000T desktop labels, read November 13, 2026).
| Job | Media | Print method | Reason |
|---|---|---|---|
| Permanent bin, shelf and beam labels | Polyester with permanent acrylic adhesive | Thermal transfer, resin ribbon | Smear, scratch and chemical resistance; no darkening with light |
| Receiving and put-away labels kept for days | Direct thermal paper | Direct thermal | No ribbon; the label's life is short |
| Labels near windows, heaters or washdown | Polyester, or topcoated direct thermal for short terms | Thermal transfer preferred | Untreated direct thermal darkens with light and heat |
| Floor positions | A floor-rated material | As the material maker specifies | Foot and cart traffic |
Direct thermal and thermal transfer printers
A desktop printer prints both kinds of label in one model family, and the difference in price is small. POSGuys lists the Zebra ZD421 thermal transfer printer, 203 dpi with USB, at $613.57, and the ZD421 direct thermal printer, 203 dpi with USB, at $525.79 (POSGuys, Zebra ZD421, read November 13, 2026). Resin on polyester needs the thermal transfer model, because direct thermal printing uses no ribbon.
The $87.78 difference buys the ability to print permanent labels. A company that prints only receiving labels can use the direct thermal model; one that prints its own bin and beam labels needs the thermal transfer model. A 203 dpi printhead places dots 0.125 mm apart, so a printed X-dimension is a whole number of dots: 0.375 mm at 3 dots, 0.5 mm at 4 dots. Choosing 4 dots puts the bar width at GS1's 0.495 mm target, rounded to the printhead.
Bin numbering scheme with a check digit
A bin code is read by people as well as by scanners, so it is built for both. The scheme used in the sample below reads from the largest unit to the smallest, in fixed width, with numbers only:
| Part | Width | Example | Meaning |
|---|---|---|---|
| Aisle | 2 digits | 04 | Fourth aisle from the door |
| Bay | 2 digits | 12 | Twelfth bay along the aisle |
| Level | 1 digit | 3 | Third shelf from the floor |
| Position | 2 digits | 03 | Third bin from the left |
| Check digit | 1 digit | 3 | Computed from the seven digits before it |
Four rules keep the scheme usable. Fixed width keeps codes sorting correctly as text, so 04-09 comes before 04-12 in a spreadsheet and on a count sheet. Numbers only avoid letters that read like digits, such as O and 0 or I and 1. Numbering bays in walking direction puts a sorted count sheet in the order a counter walks. Unused positions keep their numbers, so adding a bin later does not renumber a shelf.
The check digit uses GS1's published method for its own keys: multiply each digit alternately by 3 and 1, starting with 3 at the rightmost digit, add the results, and subtract the sum from the nearest equal or higher multiple of ten (GS1, how to calculate a check digit manually, read November 13, 2026). GS1's own example, GTIN-13 data 629104150021, sums to 57 and gives check digit 3. For bin 0412303 the weighted sum is 27, so the check digit is 3 and the full code is 04-12-3-03-3.
The digit exists for the hand-typed code. If a technician types 0421303 for 0412303, the check digit computes to 1, not 3, and the entry is refused. With weights of 3 and 1, any single mistyped digit changes the check digit. An adjacent swap is caught unless the two digits differ by exactly 5, such as 0 and 5.
Sample label run for a Des Moines parts room
The sample is a hypothetical electrical contractor in Des Moines, Iowa, labelling a parts room of 4 aisles, 10 bays per aisle, 4 levels per bay and 6 bins per level. The room layout is a sample input; the prices are POSGuys listings read November 13, 2026.
| Line | Basis | Amount |
|---|---|---|
| Bin face labels | 4 aisles × 10 bays × 4 levels × 6 bins | 960 labels |
| Beam level labels | 4 aisles × 10 bays × 4 levels | 160 labels |
| Labels needed | 960 + 160, at 3 x 1 inch | 1,120 labels |
| Polyester labels | Zebra Z-Ultimate 4000T, 3 x 1 in, 2,530 labels on a single roll | $87.00 |
| Resin ribbon | Zebra 5095, 3.31 in x 243 ft, box of 12 rolls | $134.07 |
| Printer | Zebra ZD421 thermal transfer, 203 dpi, USB | $613.57 |
| Total | Sum of the three purchases | $834.64 |
The label stock for the whole room is $38.51: 1,120 labels at $87.00 for 2,530. One ribbon roll is 2,916 inches long, more than the 1,120 inches of label face in the run, so one roll of twelve prints the room with the gaps between labels to spare. The printer is 73.5 percent of the purchase and is bought once, and the remaining 1,410 labels on the roll cover re-slotting and new bins. Aisle signs are printed larger, on a separate stock, and are not in the sum. How the labelled locations feed checkout, counts and reorder points is set out in warehouse inventory.
Warehouse inventory label checklist
- Choose the symbology the room's scanners read: plain Code 128 or QR Code for company bin codes, and leave GS1-128 to supplier cartons and pallets.
- Fix the bin code format before printing: largest unit to smallest, fixed width, digits only, with a check digit computed by GS1's 3-and-1 method.
- Number bays in walking order and keep numbers for empty positions.
- Buy polyester labels with a resin ribbon for bin and beam labels, and direct thermal paper only for short-life receiving labels.
- Buy a thermal transfer printer if the company prints its own permanent labels.
- Set the X-dimension to whole printhead dots, and leave at least 10 X-dimensions of quiet zone on each side of a linear code.
- Print the human-readable code large enough to read from the aisle on beam labels.
- Put the bin code and the stocked part number on each bin face label, and keep the bin code when the part changes.
- Verify before applying the run: print ten labels, scan each with every scanner and phone the room uses, type two codes with a deliberate digit swap into the inventory record, and confirm the check digit rejects both.
Warehouse checkout, low-stock alerts and equipment QR codes in FieldRanger
FieldRanger records what leaves the labelled shelves. Technicians check parts and materials out of a specific warehouse, so stock is counted where it actually sits, and materials tracking logs the parts and materials used on each job for job costing. Inventory alerts give low-stock warnings and reorder reminders. The warehouse inventory management software page covers checkout by warehouse, and the warehouse inventory tracking spreadsheet lays out the same stock-by-location record for a company still on a sheet.
FieldRanger checks equipment in and out by scanning its QR code on a phone, and each technician's truck can be its own stock location, so the shelves in a van take the same kind of bin label as the parts room. The bin labels in this guide serve the company's own counts, pick lists and scanner tools. A won HubSpot deal becomes a job with its context carried over, the invoice is generated from the completed work order, and invoices and payments sync with QuickBooks. Plans are on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
What are warehouse inventory labels?
Labels that identify a stock location or an item with a code people can read and scanners can decode. In a parts room they are bin face, shelf edge and beam labels carrying the company's own bin code, plus the supplier's GS1 labels on incoming cartons and pallets.
Should warehouse bin labels use Code 128 or GS1-128?
Plain Code 128, or a QR code, for the company's own bin codes. GS1 states that GS1-128 is distinguished from Code 128 by an FNC1 character after the start character and that its data is preceded by GS1 Application Identifiers, which a bin code is not.
What material lasts longest for warehouse labels?
Polyester printed with a resin ribbon on a thermal transfer printer. Untreated direct thermal labels darken over time with light and heat, so they suit short-life receiving labels.
How should warehouse bins be numbered?
From the largest unit to the smallest, such as aisle, bay, level and position, in fixed width with digits only, in walking order, with a check digit so a mistyped code is rejected.
How much does it cost to label a warehouse parts room?
In the sample, a 960-bin room needs 1,120 labels: $87.00 of polyester labels, $134.07 for a box of resin ribbons and $613.57 for a Zebra ZD421 thermal transfer printer, $834.64 in all on POSGuys listings checked November 13, 2026.
What size are GS1 pallet labels?
GS1's Logistic Label Guideline names A6 or 4 x 6 inch as the compact size and A5 or 6 x 8 inch as the large size, with the barcode placed 400 to 800 mm from the pallet's base.
The Des Moines room's 1,120 labels cost $38.51 of polyester, and the check digit on each one is what lets a technician type 04-12-3-03-3 by hand at six in the morning and land on the right bin.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo