Industry

Chimney Sweep Software:FieldRanger for Chimney Sweep on HubSpot

Chimney sweep software on HubSpot: FieldRanger schedules annual sweeps and Level 1 and 2 inspections, records photos and findings, and turns repairs into jobs.

Updated 8 min read

Chimney sweep software schedules annual sweeps and inspections, records what the technician found in each flue, prices the repairs that follow and bills the work. FieldRanger runs that work inside HubSpot, with each chimney's inspection photos and repair history on the homeowner's record.

Chimney service is one of the trades in field service software by industry, and wood heat by itself covers millions of homes. In 2020, 8.9 percent of US households, about 11 million, used wood for energy, mostly for space heating, and about 2.2 million used wood as the main space-heating fuel (EIA, Energy Explained: wood and wood waste, checked November 12, 2026).

11 million

US households that used wood for energy in 2020Source: US Energy Information Administration

NFPA 211 inspection levels and the jobs each creates

The trade schedules by inspection level. The National Fire Protection Association adopted three levels of chimney inspection into NFPA 211 on January 13, 2000, and the Chimney Safety Institute of America describes when each applies (CSIA, industry standard for inspections, March 15, 2000).

Chimney inspection levels, their triggers and their effect on the schedule
LevelWhen it appliesScopeEffect on the schedule
Level 1Annual inspection and routine sweep; an appliance replaced with one of a similar typeReadily accessible portions of the chimney, the appliance and the connectionRepeats every year in a standard slot
Level 2A new heating appliance, a change of fuel type, the sale or transfer of a property, or an operating malfunction or external eventLevel 1 plus accessible attics, crawl spaces and basements; may include a video scanLonger slot and a camera on the van; a property sale sets the deadline
Level 3A Level 1 or Level 2 inspection suggests a hidden hazard that needs access to concealed areasConcealed parts of the chimney structure and flueA separate job, which may require removing parts of the building or chimney

Local code governs where it differs. CSIA's procedure for a Level 1 inspection tells chimney service contractors to know the locally adopted codes, and notes that some sweeps use NFPA 211 as their standard where no local code exists (CSIA, Standard Operating Procedure, Level 1 inspection, masonry chimney, revised April 5, 2019).

Annual sweep cycle and the autumn calendar

The annual visit is the base of a chimney business. CSIA quotes NFPA 211: "Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits" (CSIA, homeowner resources, checked November 12, 2026). The Level 1 procedure adds the sweeping threshold: a chimney with 1/8 inch or greater buildup is swept, or sweeping is recommended.

Demand bunches before the heating season. In August 2020, CSIA urged homeowners to book annual inspections and cleanings early, and its president reported chimney work requests rising from July, about two months earlier than usual (CSIA press release, August 25, 2020).

FieldRanger turns last year's customer list into this year's schedule:

  • Recurring job templates create each household's annual sweep and inspection as a repeat service call.
  • Bulk scheduling assigns a block of annual visits at once, and capacity planning stops the office from booking more autumn visits than the crews can do.
  • FieldRanger builds each technician's route for the day automatically; chimney sweep routing software covers stop order and territories.
  • The drag-and-drop calendar shows every sweep side by side; chimney sweep scheduling software covers arrival windows, reminders and same-day changes.
  • New customers can book a visit online, beside the annual visits the office schedules.

A repair found during an autumn inspection can be booked into a month with open crew days, which the side-by-side calendar shows at a glance.

Inspection records: checklist, photos and findings

Chimney sweep report software is judged on the record it leaves. CSIA's Level 1 procedure for a masonry chimney asks a sweep who video scans the flue to photograph irregularities, identify the photos with the date and location of the job, and include them with the job sheet. It lists the items to examine: the appliance's condition, its clearance to combustibles (for unlisted appliances, local code requirements, which the procedure describes as normally 36 inches), floor protection extending 18 inches beyond a wood stove, the connector and thimble, and the clean-out doors. It also states that a video scan is not a mandatory part of a Level 1 inspection.

FieldRanger holds that record on the work order:

  • A custom checklist for each inspection level and appliance type records each item and its finding.
  • Photos and video taken inside the app attach to the work order, which carries the job's date and address.
  • Job photos sync to the homeowner's HubSpot record, and the completion and notes are logged to the HubSpot timeline.
  • The homeowner signs on the technician's phone to confirm the visit.

The inspection record is the work order, with its checklist, photos and notes, and the HubSpot contact that holds them.

Masonry and liner repairs from finding to finished job

Chimney repair software starts where the inspection ends. The sequence below follows a Level 2 inspection before a home sale.

  1. The inspection finds a cracked crown and a deteriorated clay liner. Photos and camera images attach to the work order.
  2. The office opens a HubSpot deal for the repair on the homeowner's contact, with the buyer's agent associated to it.
  3. The estimate is built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger, where it stays tied to the deal: crown rebuild, stainless steel liner kit, insulation, cap and labor.
  4. The homeowner signs through PandaDoc. The deal is marked won, and FieldRanger turns it into a repair job with the deal's context carried over.
  5. The liner kit and cap are checked out of a specific warehouse against the job, and the materials used are logged for job costing.
  6. Skill-based assignment sends the job to a technician with masonry and relining experience. The technician clocks in with the location recorded and photographs the work before and after.
  7. The invoice is generated from the completed work order, payment can be taken through Stripe, and the invoice and payment sync with QuickBooks.

Revenue reports then show job revenue and margin by service type, which separates sweeping from relining and masonry.

CSIA certification and skill-based assignment

The credential a homeowner asks about is the CSIA Certified Chimney Sweep. CSIA states that the certification "is on a three year cycle", with the credential renewed in the third year (CSIA, becoming a Certified Chimney Sweep, checked November 12, 2026).

FieldRanger assigns jobs by the certifications and expertise on each technician's record. A company that sends Level 2 inspections only to certified sweeps, and relining only to crews trained for it, records those skills on each technician, and the calendar offers only the technicians who hold them.

Realtors, inspectors and homeowners in HubSpot

A Level 2 inspection at the sale of a property brings real estate agents and home inspectors into the customer list. In HubSpot, each brokerage can be a company with its agents as contacts, and the homeowner's contact holds the chimney's history. HubSpot reports can follow revenue from the lead source to the completed job, which shows how much work each referral relationship produced. The HubSpot field service overview covers the sync between FieldRanger and HubSpot.

Chimney sweep accounting software is a separate product. FieldRanger generates invoices from completed work orders and syncs invoices and payments with QuickBooks, which keeps the books.

Software used by chimney sweep companies

Chimney companies run on general field service apps, spreadsheets and paper inspection forms, and accounting software. Jobber, Housecall Pro and ServiceTitan each publish a chimney sweep software page (Jobber, Housecall Pro, ServiceTitan, checked November 12, 2026), each with its own customer database. A sweep company that does not use HubSpot and wants one product with a CRM of its own is served by those apps.

FieldRanger differs in where the customer lives. The sweep list, the referral partners and the marketing emails stay in HubSpot, and FieldRanger adds the jobs, routes and inspection records to those contacts. The same scheduling functions for other trades are described on dispatch software. Owners setting up a new company can read how to start a chimney sweep business.

Chimney work outside FieldRanger

  • No formatted inspection report template and no NFPA 211 code library.
  • No connection to chimney camera systems; footage recorded on a camera's own unit stays there unless photos or video are also taken in the FieldRanger app.
  • No general ledger; QuickBooks keeps the accounts.

Frequently asked questions

What software do chimney sweep companies use?

General field service apps such as Jobber, Housecall Pro and ServiceTitan, which publish chimney sweep pages, along with spreadsheets, paper inspection forms and accounting software. FieldRanger serves sweep companies that keep their customers in HubSpot.

What is chimney sweep report software?

Software that records an inspection's findings, with checklists, photos and notes, and keeps them with the customer. In FieldRanger the record is the work order, with its checklist, photos and notes, and the HubSpot contact that holds them.

What are the three levels of chimney inspection?

NFPA 211 defines three. Level 1 covers readily accessible portions during routine sweeps. Level 2 adds attics, crawl spaces and basements and applies after appliance or fuel changes, at a property sale or after a malfunction. Level 3 reaches concealed areas when a hidden hazard is suspected.

How frequently should a chimney be inspected?

NFPA 211, as quoted by CSIA, states that chimneys, fireplaces and vents shall be inspected at least once a year. FieldRanger holds the annual visit as a recurring job on each household's record.

When is a Level 2 chimney inspection required?

CSIA describes a Level 2 inspection as required when a new heating appliance is added, when the fuel type changes, upon the sale or transfer of a property, and after an operating malfunction or external event likely to have damaged the chimney.

Is there chimney sweep accounting software?

FieldRanger is not accounting software. It generates invoices from completed work orders and syncs invoices and payments with QuickBooks.

How much does chimney sweep software cost?

Pricing is per technician per month, listed on the pricing page; the free trial lasts 14 days without a card.

Every flue on the list is due again in twelve months, and in FieldRanger next year's visit already exists on the homeowner's HubSpot record, with this year's photos attached. The trades are listed under field service software by industry, the calendar under chimney sweep scheduling software, and the plans under pricing; Start free trial runs 14 days and asks for no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo