Industry
Janitorial Time Tracking Software:Located Clock-Ins, Travel Time and Per-Clean Pay in HubSpot
Janitorial time tracking software on HubSpot: a located clock-in at every house and building, with the drive between them kept visible for wage-hour payroll.
Janitorial time tracking software records when each cleaner starts and stops work at each house or building, and where. In FieldRanger, each clock event on the cleaner's phone carries a position and lands on that visit's job inside HubSpot, so a day of short visits becomes hours that payroll can count.
Time records are the payroll side of a cleaning app, and a cleaning day produces many clock events. A maid service cleaner may work several houses between nine and four. A janitorial cleaner may cover a string of small offices after six, or a day porter shift and a night building on the same date. Each visit is short, the drive between visits recurs through the day, and federal wage rules count that drive as work.
Short visits and the clock events they create
Each house or building visit is a FieldRanger job, created by a recurring job template for the weekly clean or the nightly contract. The assigned cleaner opens the visit with a clock-in and closes it with a clock-out. Both events carry the phone's position, and the minutes between them belong to that visit.
A day of six houses therefore produces twelve clock events and five gaps. The events show the time at each address. The gaps show the drive, the stop for supplies and the lunch break. Travel has no entry type of its own in FieldRanger, so the gaps are read from the clock events and counted in the payroll review.
Some residential companies send teams of two or three cleaners in one car. One FieldRanger job can carry several technicians, so a team of two or three sits on the same visit, and each team member clocks in and out on their own phone against that job.
Travel between houses and buildings as hours worked
The federal rule on travel between work sites is direct. "Time spent by an employee in travel as part of his principal activity, such as travel from job site to job site during the workday, must be counted as hours worked" (29 CFR 785.38, 2025 edition, revised as of July 1, 2025). The drive from the second house to the third is hours worked for a non-exempt cleaner, whether or not the cleaner is paid per house.
The same section draws the line after the last job. Its example is a worker who finishes a job at 8 p.m. and must return to the employer's premises by 9 p.m.: "all of the time is working time". If the worker goes home instead, "the travel after 8 p.m. is home-to-work travel and is not hours worked" (same source). For a cleaning company the question is the last stop. A cleaner who drives the company car back to the office to drop supplies and keys is working until arrival there. A cleaner who goes home from the last house is not.
FieldRanger supplies three pieces of that record. The clock-out at the last house or building marks the end of site work. The gaps between clock events mark the travel during the day. Job-to-job travel time and mileage estimates on the planned route give the office a figure to compare each gap against, so a gap that runs far past the estimate is visible before payroll closes.
Per-clean pay, the regular rate and overtime
Pay by the house rather than by the hour is piece-rate pay in federal terms. Under 29 CFR 778.111, the regular rate is found by adding the week's piece-rate earnings and "any sums paid for waiting time or other hours worked", then dividing by "the number of hours worked in the week". Hours over 40 earn an extra "one-half this regular rate of pay". The regulation's own example: 50 hours worked, $491 earned at piece rates and $32 for 4 hours of waiting time give a regular rate of $10.46, and the 10 overtime hours add $52.30 (29 CFR 778.111, checked November 2026).
Travel hours sit in the denominator. A per-house cleaner whose drives between houses go unrecorded shows fewer hours worked than were worked, which raises the computed regular rate and lowers the overtime that appears due. The located clock events and the gaps between them supply the full count of hours. FieldRanger does not run payroll; custom reports total hours by cleaner, day and week and download as CSV or Excel for the payroll system.
Split shifts between day houses and night buildings
A company that runs both residential and commercial work can give one cleaner a split day: houses until two, then offices from seven. The hours between are not worked if the cleaner is free. Under 29 CFR 785.16, periods "during which an employee is completely relieved from duty and which are long enough to enable him to use the time effectively for his own purposes are not hours worked". The worker must be "definitely told in advance that he may leave the job" and need not return "until a definitely specified hour has arrived" (29 CFR 785.16, checked November 2026).
The schedule is the evidence for that advance notice. In FieldRanger the night building's job carries an arrival window, and the job's details sit on the cleaner's phone in advance. The afternoon clock-out at the last house and the evening clock-in at the first building bracket the off-duty period on the record.
Rounding short visits to the quarter hour
Rounding matters more when the visits are short. Federal rules accept recording start and stop times "to the nearest 5 minutes, or to the nearest one-tenth or quarter of an hour", provided the practice "will not result, over a period of time, in failure to compensate the employees properly for all the time they have actually worked" (29 CFR 785.48, checked November 2026). A rule that only ever rounds down takes minutes from the cleaner at every house, and a day of short visits repeats the loss; that is the result the regulation excludes.
The clock events in FieldRanger carry the times recorded, and any rounding policy is applied in the payroll system, where its effect over a pay period can be checked against the exported clock times.
Hours by account and by cleaner
The same clock events answer the office's question as well as payroll's. Custom reports total hours by cleaner and by client account, and revenue reports show job revenue and margin by customer or service type. A nightly office contract whose cleaners log more hours each month than the bid allowed shows up on the report before the contract renews. Comparing those hours with the bid itself is the subject of janitorial bidding software.
Technician performance reports show completion rates, on-time arrivals and productivity by cleaner. Scheduled reports email the week's hours to the owner and the payroll clerk every Monday, so the review of gaps and split shifts happens before the payroll deadline rather than after a complaint.
A maid service Tuesday from first house to payroll export
- The recurring job templates create the day's six house visits, and FieldRanger builds the assigned cleaner's route automatically.
- At 8:55 a.m. the cleaner clocks in at the first house. The clock-in records the location, and the work order shows the room checklist and the access note.
- With every room ticked and the finished bathroom photographed, the cleaner clocks out. The drive to the next house opens a gap on the record.
- The cleaner repeats the pattern at each house. A lunch break between the third and fourth houses is a gap that the company's meal-period policy covers.
- At 3:40 p.m. the cleaner clocks out at the sixth house and drives home, which ends the working day under 29 CFR 785.38.
- On Monday the scheduled report lists the week's clock events by cleaner. The office counts the drive gaps as hours worked and excludes bona fide meal periods under its policy.
- The report downloads as Excel for payroll, and each visit's completion, notes and photos are already on the client's HubSpot timeline.
Janitorial time clock apps and FieldRanger
Janitorial Manager describes timekeeping "paired with GPS tracking and geofencing", clock-in by "scanning a QR code or an NFC tag", by "simply calling in", or "using a kiosk to clock in & out on a shared device" (Janitorial Manager, janitorial time tracking, checked November 2026). No HubSpot connection is named there.
A janitorial contractor whose cleaners clock in at a building's QR code or a shared kiosk is better served by a timekeeping system with those methods. FieldRanger's clock-in is from the cleaner's phone, and the native app keeps working without signal, syncing the clock events when the phone is back online. FieldRanger fits the cleaning company that sells and renews its accounts through HubSpot and wants each cleaner's hours on the visit, the client and the deal that the account came from.
Janitorial timekeeping methods outside FieldRanger
- Clock-ins are made on the cleaner's phone.
- Location is recorded at clock-in and clock-out, not continuously.
- No separate travel or meal entry; drive time and breaks are read from the gaps between clock events.
- Rounding, overtime and piece-rate arithmetic belong to the payroll system; FieldRanger supplies the clock events as recorded.
Frequently asked questions
What is janitorial time tracking software?
Software that records when each cleaner starts and stops work at each building or house, and where. In FieldRanger, every clock event carries the phone's position and belongs to a visit on a HubSpot client account.
Is drive time between cleaning jobs paid?
For non-exempt cleaners, yes. Under 29 CFR 785.38 the drive between one cleaning job and the next, inside the working day, is hours worked. The drive from home to the first job and from the last job home is ordinary commuting.
How is overtime calculated for cleaners paid per house?
Under 29 CFR 778.111, the week's piece-rate earnings and other pay are divided by all hours worked, including travel between houses, to give the regular rate. Hours over 40 earn an additional half of that rate.
Can cleaning companies round clock-in times?
Federal rules accept rounding to the nearest 5 minutes, tenth or quarter hour if, over time, cleaners are still paid for all the time they worked. Rounding that only ever rounds down does not meet that test.
Is time between a day shift and a night shift paid?
Not if the cleaner is completely relieved from duty, told in advance when to return, and the period is long enough to use for personal purposes, under 29 CFR 785.16.
Does FieldRanger track cleaners' location during the shift?
No. FieldRanger records the phone's location at clock-in and clock-out. It does not record a continuous trail between those events.
A cleaner's six houses produce twelve located clock events in FieldRanger, and the five drives between them are hours worked under 29 CFR 785.38 that the payroll review can see before it closes. Per-technician plans are on pricing with Start free trial for 14 days and no card; the trade's full workflow is on cleaning app.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo