Industry

Courier Route Planning Software:Delivery Route Optimization in FieldRanger and HubSpot

Courier route planning software on HubSpot: FieldRanger sequences each driver's stops, keeps delivery windows, reroutes for rush pickups and logs every drop.

Updated 8 min read

Courier route planning software decides which driver takes which stops and in what order, so a day of deliveries and pickups fits the drivers, the vans and the delivery windows. FieldRanger builds each driver's route automatically, sequences the stops against live traffic and changes the route when a rush pickup arrives mid-morning.

Route planning is one task within last mile delivery software; the hub page covers the accounts, proof of delivery and fleet records around it. This page covers the route itself: what goes into it, how FieldRanger builds and changes it, and which routing problems need a dedicated tool. The mechanism common to every trade is set out on the route optimization software page.

Delivery route planning, optimization and management

Three product names share this category, and each names a different stage of the same day.

Delivery route planning software builds tomorrow's routes from the orders on hand: which stops, which driver, which zone. Delivery route optimization software computes the stop order inside each route, the step operations research calls the vehicle routing problem. Delivery route management software runs the routes once the vans leave: it tracks progress, absorbs changes and keeps the record of what happened.

FieldRanger does all three on one schedule. Its auto-routing builds each driver's day of stops as one route; route optimization sequences the stops to cut drive time and fuel cost; and dynamic rerouting, live vehicle locations and route history cover the day as it runs.

Stops, windows, drivers and vans as route inputs

A courier route is built from four kinds of input, and the quality of the route depends on how exactly each is recorded.

Stops. In FieldRanger each delivery or pickup is a job with an address, the account's instructions and a status the dispatcher can see. A pharmacy drop at a back door and a lab pickup at a reception desk are different stops even on the same street, so the instructions belong on the job.

Windows. Time window management sets an arrival window on each stop and tracks on-time performance against it. Google's routing documentation describes the general case: "Many vehicle routing problems involve scheduling visits to customers who are only available during specific time windows" (Google OR-Tools, vehicle routing with time windows, checked November 2026). A bank's cash-room hours and a store's receiving dock are hard windows; a homeowner's preference for the morning is a soft one.

Drivers and zones. Territory management defines service zones and assigns drivers to them, and service area mapping shows the streets that no zone covers. Skill-based assignment keeps work that needs training, such as specimen handling, with the drivers who hold it.

Vans. Vehicle assignment shows which vans are free, and every vehicle's GPS location appears on a live map. The van's load limit is not a route input in FieldRanger, as the limits section below sets out.

Standing routes, rush runs and direct store delivery

Standing routes. Pharmacy runs, lab specimen pickups, auto parts deliveries from a dealer to repair shops and interoffice mail repeat on fixed days. Recurring job templates hold those stops, so the standing route exists on the schedule before the day starts. Route history shows how last week's version of the route ran.

Rush and on-demand runs. A same-hour pickup is added after the vans have left. The dispatcher adds the job, dynamic rerouting adjusts the route, and the driver receives a push notification for the change. Conflict detection warns when the new stop double-books a driver.

Multi-drop parcel days. A shipper's batch of small parcels produces many short stops in one zone. Bulk scheduling assigns the batch at once, and capacity planning prevents overbooking with capacity and workload balancing across drivers.

Wholesale food and beverage routes. Direct store delivery to restaurants, grocers and convenience stores runs on route days and receiving windows. Food that needs temperature control adds a federal record. Under the FDA's sanitary transportation rule, the shipper must "specify in writing to the carrier" the operating temperature, and the carrier must, on request, "demonstrate that it has maintained temperature conditions" consistent with it (21 CFR 1.908, checked November 2026). A custom checklist on each stop can carry the temperature check at loading and at the drop, with a photo of the reefer display as the reading.

A courier route from order cutoff to the last drop

  1. Orders reach the schedule three ways: standing stops from recurring job templates, rush requests booked as jobs, and the first job of a new contract, created when the HubSpot deal is marked won with the deal's context carried over.
  2. At the cutoff, the dispatcher assigns the batch to drivers by zone with bulk scheduling. The courier dispatch software page covers assignment and the calendar in detail.
  3. FieldRanger builds each driver's route for the day, sequences the stops, and shows job-to-job travel time and mileage estimates. Real-time traffic data from Google Maps feeds the ETAs.
  4. The driver works the route from the mobile app, with turn-by-turn voice guidance and one tap to open directions to the next stop.
  5. A rush pickup arrives at 11:00. The dispatcher adds it, the route adjusts, and the recipient at the next stop can be texted a revised time through the Twilio integration.
  6. At each stop, the driver collects the recipient's signature and takes a photo with the in-app camera. The job status changes in real time, and the completion is logged to the account's HubSpot timeline.
  7. After the last drop, route history keeps the day's route for review, and on-time performance shows which windows were missed and by which driver.

Billing for the day's stops is covered on courier billing software.

Driving limits on box truck routes

150 air-miles

short-haul radius from the work reporting location under federal hours-of-service rulesSource: 49 CFR 395.1(e)(1), checked November 2026

Route length has a legal ceiling once the vehicle is heavy enough. Federal rules define a commercial motor vehicle by, among other tests, a gross vehicle weight rating "of 4,536 kg (10,001 pounds) or more" (49 CFR 390.5, checked November 2026). A delivery fleet can mix cargo vans below that rating with box trucks above it. For a carrier in interstate commerce, the federal hours rules then apply to the heavier vehicles and their drivers.

For a property-carrying driver, "a driver may drive a total of 11 hours" within a 14-hour period that starts after 10 consecutive hours off duty, with a 30-minute break after 8 hours of driving (49 CFR 395.3, checked November 2026). A local route can use the short-haul exception when the driver stays within a 150 air-mile radius (172.6 statute miles), returns to the work reporting location and is released within 14 consecutive hours; the carrier then keeps time records instead of logs (49 CFR 395.1, checked November 2026).

FieldRanger's located clock-ins and clock-outs record when and where each driver's day started and ended. FieldRanger does not count hours-of-service limits or replace an electronic logging device, so the dispatcher keeps each box truck route inside the 14-hour window when the stops are assigned.

Routing constraints left to dedicated routing software

FieldRanger routes field jobs, and a courier's stops fit that model as jobs with addresses and windows. Four parts of delivery routing belong to dedicated routing software.

  • Vehicle capacity. FieldRanger has no weight, volume or pallet limits per van. Routific, for comparison, builds routes that respect "vehicle capacity" (Routific, courier delivery software, checked November 2026).
  • Paired pickups and deliveries. In a point-to-point run, "each item must be picked up before it is delivered" (Google OR-Tools, pickups and deliveries, checked November 2026). In FieldRanger a point-to-point run is booked as two jobs, and the dispatcher checks their order.
  • Barcode scanning and order import. Routific captures proof of delivery "by photo, signature, or barcode" and connects to Shopify, WooCommerce and Magento. FieldRanger records signatures and photos, with no package scanning or store import.
  • Recipient tracking pages. Routific sends notifications "with a live tracking link". FieldRanger sends SMS through Twilio, with no tracking page for recipients.

Routific's courier page does not mention HubSpot. A high-volume parcel or e-commerce delivery operation, where capacity, scanning and recipient tracking decide the day, is better served by a dedicated routing tool. FieldRanger fits the courier that sells contracts to business accounts through HubSpot and runs standing and rush routes for them. FieldRanger is priced per technician, which for a courier means per driver; the plans are on pricing.

Route cost on the HubSpot account

A route is a cost carried by accounts. Mileage tracking logs odometer readings for expense reports and IRS mileage records, fuel monitoring tracks fuel use, and utilization reports show the vans that sit idle. Revenue reports show job revenue and margin by customer, and travel estimates show the miles each account's stops add. Read together, they show a standing route whose miles have outgrown its rate. The account manager reads the delivery history on the HubSpot company record, next to the contract renewal.

Courier route planning software questions

How to optimize delivery routes using software?

Record every stop as a job with an address and an arrival window, group the stops into driver zones, then let the software compute the stop order from travel times and traffic. During the day, add rush stops to the live route and let it resequence; afterwards, compare route history and missed windows to plan the next day. FieldRanger does the computing and resequencing automatically for each driver.

What is courier route planning software?

Software that assigns a courier's pickups and deliveries to drivers and orders each driver's stops so the day fits the windows and the drive is short. FieldRanger does this on HubSpot, with each stop held as a job on the customer's account.

What is the difference between delivery route planning and route management software?

Route planning software builds the routes before the day starts. Route management software runs them during the day: it tracks the vans, takes in changes and keeps the record. FieldRanger covers both, along with the stop order itself.

Is there a delivery route planning app for drivers?

FieldRanger's native iOS and Android apps give each driver the day's route with turn-by-turn voice guidance, one-tap directions to the next stop, signature capture and photos. The route is built by the office, not typed in by the driver.

Can routing software for delivery drivers handle delivery windows?

FieldRanger sets an arrival window on each stop and tracks on-time performance against it, and the route adjusts when priorities change or a stop is added.

Does FieldRanger plan routes by vehicle capacity?

No. FieldRanger has no weight, volume or pallet limits per vehicle. A delivery operation whose routes are set by load needs routing software with capacity constraints.

What software suits wholesale food and beverage delivery routes?

Route days, receiving windows and a temperature record at each drop. FieldRanger holds standing route days as recurring job templates, sets the windows and records the temperature check on a checklist with a photo of the display; it does not read reefer sensors or manage inventory on the truck.

The best stop order on paper still has to survive the 11:00 rush pickup, and FieldRanger rebuilds the route when it arrives, on the account the driver is serving. Who drives which route is decided on courier dispatch software, and the wider courier business is under last mile delivery software. Pricing lists the plans, and Start free trial gives 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo