Industry

Electrician Invoice App:Electrical Invoicing in FieldRanger and HubSpot

Electrician invoice app on HubSpot: bill service calls, flat-rate jobs and time-and-materials work from the completed work order, and take payment via Stripe.

Updated 7 min read

An electrician invoice app turns a finished service call, panel upgrade or time-and-materials job into a bill the customer can pay on site. FieldRanger generates the invoice from the completed work order, with the hours, materials, photos and signature recorded on the job, takes payment through Stripe and syncs invoices and payments to QuickBooks.

Billing is the last office task in electrical contractor software. It turns the field record into money. Each line on an electrical invoice rests on something recorded during the job: a located clock-in, a breaker checked out of the warehouse, a photo of the panel before the cover went on. An invoice typed from memory at the end of the week has none of that behind it.

Service call, flat-rate and time-and-materials billing

Electrical contractor billing software has to handle three pricing methods. A single shop can use all three in one week.

A service call bills a trip or diagnostic charge, then the repair. A tripping breaker, a dead circuit or a failed GFCI receptacle is found and fixed in one visit.

A flat-rate job bills a fixed price for a defined task: a dedicated circuit, an EV charger circuit, a whole-house surge protector, a panel replacement. The price was set on the estimate before the work began. The invoice repeats it whatever the hours.

A time-and-materials job bills the hours worked at a labor rate plus the materials used. The Federal Acquisition Regulation defines the arrangement precisely: direct labor hours at fixed hourly rates "that include wages, overhead, general and administrative expenses, and profit", and materials at actual cost (FAR 16.601, checked November 2026). The definition governs federal contracts; the structure is the same on a tenant improvement or an intermittent fault that takes a day to trace. The labor rate therefore sits well above the wage. The median electrician wage was $30.38 an hour in May 2025 (BLS Occupational Outlook Handbook, electricians, modified August 27, 2026), and the billed rate adds overhead and profit on top of it.

Flat rate places the risk of a slow job on the contractor. Time and materials places it on the customer, who then asks to see the hours. FieldRanger keeps flat task prices and labor rates in a price book of services, parts and rates, and estimates and invoices are built from it.

Electrical invoice lines and the record behind each

Lines on an electrical invoice and the FieldRanger record that supports each
Invoice lineExampleRecord in FieldRanger
Job and siteService address, panel location, permit numberDigital work order with customer information and instructions
LaborHours by electrician and day, or the flat task priceClock-ins and clock-outs logged against the job, each with a location
MaterialsBreakers, wire by the foot, boxes, devices, conduit and fittingsMaterials logged against the job; stock checked out of a specific warehouse
Work described"Replaced 100 A panel with 200 A panel; relocated two circuits"Work order notes and the job checklist
Proof of workPanel before and after, rough-in before the walls closedBefore and after photos attached to the work order
AcceptanceCustomer approval of the finished workCustomer signature taken on site
FeesPermit and inspection fees, trip chargeThe permit receipt and the shop's fee schedule

Two records carry the weight when a time-and-materials bill is questioned. The hours are the located clock events on the job. A customer who asks whether the electrician was on site all day can see where each clock-in was taken. The materials are the parts logged against the job, so the panel and breakers on the bill match what left the warehouse.

A time-and-materials job from work order to paid invoice

A tenant improvement for a dental office, billed time and materials, shows the sequence.

  1. The property manager signs the proposal, the HubSpot deal is marked won, and FieldRanger creates the job with the deal's context carried over. The scope and not-to-exceed figure came from the estimate, covered on the electrical estimating software page.
  2. The dispatcher drags three days of work onto the calendar, one job per day, each carrying a licensed electrician and an apprentice. Skill-based assignment matches the job to workers by certification and expertise.
  3. Each morning both workers clock in on the FieldRanger mobile app at the suite, and the clock-in records where each phone was. Time accrues against the job until they clock out.
  4. Wire, boxes, devices and breakers are checked out of a specific warehouse and logged against the job for job costing.
  5. Before the drywall contractor closes the walls, the electrician photographs the rough-in. The photos attach to the work order and sync to the customer's HubSpot record, and they serve the inspection and any later question about what is behind the wall.
  6. At trim-out, the job checklist records each circuit labeled and tested, and the property manager signs on site.
  7. The invoice is generated from the completed work order. The property manager pays through Stripe, or later against the invoice, and invoices and payments sync with QuickBooks.
  8. The completion is logged to the HubSpot timeline, and the deal shows the job complete. A job status change can trigger a HubSpot workflow, such as a task for the office to prepare the lien waiver.

Progress billing and construction billing

New construction and large tenant work bill in stages rather than at completion. An electrical subcontractor on a commercial project submits pay applications against a schedule of values as rough-in, trim-out and final are reached. The general contractor can withhold retainage until closeout, and lien rights depend on state deadlines.

FieldRanger generates invoices from completed work orders and does not do progress billing or retainage. An electrical contractor whose revenue is mainly staged construction billing needs construction billing software that handles pay applications. FieldRanger fits the service, residential and light commercial side, where a job finishes and is billed.

Payment on site and the HubSpot record

Stripe takes payment in the field. A homeowner whose new EV charger circuit has just passed its test can pay before the van leaves. Invoices and payments sync with QuickBooks, so the bookkeeper does not re-enter them.

The invoice also completes the HubSpot record. Revenue reports show job revenue and margin by customer or service type, so service calls, panel upgrades and EV charger installs can be compared on margin rather than on volume. Revenue attribution follows the money from the first lead to the completed job in HubSpot reports, which ties a marketing source to billed work.

Electrician invoice apps compared by business type

A solo electrician who sends a few invoices a week, with no crew and no CRM, is served by a standalone invoice app; several offer free tiers. A contractor billing commercial construction in stages needs construction billing software with pay applications and retainage. A shop that prices from a flat-rate price book can keep it in FieldRanger, where estimates and invoices are built from it.

FieldRanger fits the electrical contractor who sells and markets through HubSpot and wants each invoice generated from the work order that recorded the job.

Frequently asked questions

What is an electrician invoice app?

An app that builds the bill for electrical work from the job record and collects payment. FieldRanger generates the invoice from the completed work order, with hours, materials, photos and the customer's signature behind it, and takes payment in the field through Stripe.

What should an electrical invoice include?

The customer and service address, the permit number where one applies, a description of the work by panel and circuit, labor as hours or a flat price, materials with quantities, permit and inspection fees, the total, payment terms and the customer's signature.

How do electricians bill time and materials?

By charging the hours worked at a labor rate that covers wages, overhead and profit, plus the materials used. The bill is only as credible as the hour and material records behind it; in FieldRanger, both are logged against the job.

Can an electrician take card payment on site?

Yes. FieldRanger takes payment in the field through its Stripe integration once the invoice is generated from the completed work order.

Does FieldRanger do progress billing for electrical contractors?

No. FieldRanger generates invoices from completed work orders. Progress billing against a schedule of values, retainage and pay applications belong in construction billing software.

Is there a free electrician invoice app?

Several standalone invoice apps offer free tiers for occasional invoices, with no job, crew or CRM records. FieldRanger offers a 14-day free trial with no card required.

Does FieldRanger sync electrical invoices with QuickBooks?

Yes. Invoices and payments sync with QuickBooks, so the accounting record matches the job record.

Electrical invoices in FieldRanger

An electrical invoice in FieldRanger is the last record of a job that began as a HubSpot deal and was priced with electrical estimating software. The rest of the trade's workflow is on the electrical contractor software page. Plans are on pricing, and Start free trial runs 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo