Industry

Franchise Stock Management Software:Location Warehouses, Brand-Standard Parts and Network Reports in FieldRanger and HubSpot

Franchise stock management software on HubSpot: FieldRanger counts parts in each location's warehouse, logs them against jobs and warns when a unit runs low.

Updated 7 min read

Franchise stock management software counts the parts and materials each franchise location holds, records which job used them, and gives the franchisor a reading across the network. FieldRanger handles the location side inside HubSpot. Technicians check stock out of their own location's warehouse against each job, and low-stock warnings tell that location when to reorder.

Stock is one record set within franchise management software, which covers territories, brand standards and royalties across a home service network. In that network, stock is recorded at three levels. The franchisor specifies it: which products, which brands, which suppliers. The location holds it: a shelf count in its own shop. The job consumes it: the parts that went into one customer's house. A restaurant or retail franchise counts goods sold across a counter; a field service franchise counts goods used up on the customer's property, so the job is where the count changes.

Franchisor specifications, location stock and job consumption

Levels of franchise stock and where each is recorded
LevelSet byExamples in a home service franchiseWhere the record lives
SpecificationFranchisorApproved chemicals, approved equipment brands, a designated supplier for branded itemsOperations manual and the franchise disclosure document; outside FieldRanger
Location stockFranchiseeFilters, fittings, antimicrobial, plastic sheeting, bait stations on the shop shelfThe location's warehouse in FieldRanger, checked out against each job
Job consumptionTechnicianThe parts and materials used on one service callMaterials logged against the job for job costing
Reusable equipmentFranchiseeDehumidifiers, air movers, backpack sprayers, drain camerasEquipment records checked in and out by QR code

Each level answers a different question. The specification answers what a location is allowed to stock. The location count answers whether there is enough on the shelf for tomorrow's jobs. The job record answers what the work cost and where the stock went. Franchise stock management software that holds only the middle level leaves the franchisor guessing at the other two.

Required purchases and FDD Item 8

The franchisor's specification is a disclosure item before it is a stock list. Under the FTC Franchise Rule, Item 8 of the franchise disclosure document covers the franchisee's obligations to buy or lease "goods, services, supplies, fixtures, equipment", inventory, computer hardware and software, real estate or comparable items from the franchisor, its designee or approved suppliers, or to the franchisor's specifications. For each obligation the franchisor states whether it or an affiliate is an approved supplier and how other suppliers are approved. It also states "whether the franchisor issues specifications and standards". Where the franchisor earns revenue from required purchases, it discloses the amount and its share of total revenue. The item ends with "the estimated proportion of these required purchases and leases by the franchisee to all purchases and leases" in establishing and operating the business (16 CFR 436.5(h), via Cornell LII, checked November 2026).

Those disclosures describe purchases, and purchases happen in the accounting and supplier systems. FieldRanger records the other end of the same goods: which location shelf they left and which job used them. A franchisor comparing a location's purchases from the designated supplier with the materials its technicians logged reads both records side by side. The comparison runs outside FieldRanger, from an exported report.

Location warehouses and low-stock warnings

FieldRanger counts stock where it sits. Technicians check parts and materials out of a specific warehouse, so each franchise location set up as its own warehouse keeps its own count, and each checkout names the job that took the stock. A multi-unit operator with three territories and one shop holds one warehouse; an operator with a shop in each territory holds three. Inventory alerts send low-stock warnings and reorder reminders for each location's stock, so one unit's empty shelf raises that unit's warning.

Each technician's truck can also be its own stock location, so a franchise system that restocks trucks nightly from the shop counts what rides on each truck as well as what sits on the shelf.

HubSpot holds a related list that does not count anything. Its product library, available on all products and plans, stores the goods and services sold, with prices. HubSpot defines a SKU as a code "to track inventory internally", and the product record carries no stock quantity (HubSpot Knowledge Base, products, updated October 21, 2026). The product library is the price list; the FieldRanger warehouse is the shelf.

Network reports for the franchisor

The franchisor's reading of stock comes from reports rather than from walking each shop. Materials logged on each job feed job costing, and revenue reports give job revenue and margin by customer or service type. Custom reports are built with a drag-and-drop report builder, scheduled reports email the figures on a fixed day, and any report downloads as CSV or Excel. KPI tracking sets a target, such as a job margin, and tracks it.

Equipment reads the same way. Asset categories organize equipment by type, location and department, so the franchisor sees which unit holds which drain camera, and usage history records who used each piece and when.

Who sees which location's records is a HubSpot question, answered by the team and permission structure on the franchise management software page.

A water damage job's stock from location shelf to job cost

  1. A lead for an address in the location's territory reaches HubSpot from the brand's website. The location's office wins the deal, and FieldRanger turns it into a job with its context carried over.
  2. At the shop, the technician checks antimicrobial, plastic sheeting and contractor bags out of the location's warehouse against the job, and scans four air movers and a dehumidifier out by QR code.
  3. On site, the technician photographs the affected rooms, works the brand's water damage checklist and logs the materials used.
  4. The antimicrobial on that location's shelf falls below its reorder point, and the inventory alert raises a low-stock warning for that warehouse alone.
  5. On the final visit, the equipment is scanned back in, and its usage history shows the job it served.
  6. The completed work order generates the invoice, and the invoice and payment sync with QuickBooks. The revenue report shows the job's margin with every logged material in it.
  7. On Monday, the scheduled report the franchisor built arrives by email, with revenue and margin by service type.

Franchise inventory tools compared

Trade systems with a full inventory module carry stock into purchasing. ServiceTitan's documentation describes a module to "simplify item tracking across multiple trucks and warehouses". It lets users "Move inventory items between trucks and warehouses" and replenishes stock by transferring it from the main warehouse. Its Purchasing module handles "replenishment, purchase order workflows, and job costing", and the page names Intacct and QuickBooks Desktop as accounting connections, not HubSpot (ServiceTitan Help, inventory module, updated October 15, 2026). A franchise network whose locations buy through purchase orders is better served by a module of that kind.

FieldRanger fits the network whose locations each run one shop, whose franchisor reads results from HubSpot and exported reports, and whose sales already run in HubSpot. Franchisors whose units are restaurants, stores or gyms count food and retail goods in point-of-sale systems instead; the repair work those buildings need is covered under facility management software.

Franchise stock functions outside FieldRanger

  • Purchase orders, receiving against them and supplier price lists.
  • Lot numbers on chemicals and serial numbers on parts.
  • A franchisor ordering portal for branded supplies, and any royalty or rebate calculated on product purchases.

Frequently asked questions

What is franchise stock management software?

Software that counts the parts and materials each franchise location holds, records which job used them, and reports stock and consumption to the franchisor. FieldRanger does the location side inside HubSpot, with stock checked out of each location's warehouse against the job.

Can each franchise location keep its own inventory in FieldRanger?

Yes. Technicians check stock out of a specific warehouse, so a location set up as its own warehouse keeps its own count and its own low-stock warnings.

Can a franchisor see inventory across all locations?

Through reports: custom and scheduled reports, KPI tracking and CSV or Excel exports.

Does a franchisor have to disclose required inventory purchases?

Yes. Item 8 of the franchise disclosure document, under 16 CFR 436.5(h), covers required purchases from the franchisor or approved suppliers, how suppliers are approved, any franchisor revenue from those purchases and their estimated share of the franchisee's purchases.

Does FieldRanger track stock on each technician's truck?

Yes. Each technician's truck can be its own stock location, beside the location's warehouse.

How much does franchise stock management software cost?

FieldRanger is priced per technician, with the plans on the pricing page; the trial runs 14 days with no card.

A franchise's stock passes through three hands: the franchisor writes Item 8, the location fills a shelf, and a technician empties part of it into a customer's house. FieldRanger records the last two against the job a HubSpot deal created, and the pricing page carries the per-technician plans (Start free trial: 14 days, no card).

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo