Industry
Generator Service Software:Standby Installs, Load Bank Tests and Maintenance Contracts in FieldRanger and HubSpot
Generator service software on HubSpot: FieldRanger schedules standby installs, exercise runs and load bank tests, logs hour meter readings and bills each job.
Generator service software schedules a generator company's standby installs, inspections, load bank tests and repair calls, and records each unit's readings on a work order. FieldRanger does this inside HubSpot: a won deal becomes the install job, maintenance contracts run as recurring job templates, and the completed work order generates the invoice.
Generator service is one of the trades under field service software by industry. Two parties outside the company set much of its calendar. The engine's manufacturer sets the service schedule. For an emergency power system in a hospital or nursing home, a standard adopted by the fire code also sets weekly, monthly, annual and three-year tests, and an inspector reads the log.
Generator service jobs: installs, exercise runs, load bank tests and repairs
| Job | Customer | What starts it | What the work order records |
|---|---|---|---|
| Residential standby install | Homeowner | A signed estimate | Unit model and kW rating, transfer switch, fuel supply, pad photos, permit and inspection dates |
| Planned maintenance visit | Homeowner or facility | A maintenance contract | Oil, filters, coolant, belts and hoses, battery test, hour meter reading |
| Weekly inspection or monthly exercise | Hospital, nursing home or other emergency power site | The facility's written test schedule | Run time, load in kW, oil pressure, transfer time, cooldown delay |
| Annual load bank test | A facility whose building load cannot reach the monthly minimum | The annual date on the schedule | Load steps as a share of nameplate kW, with their durations |
| 36-month test | A Level 1 emergency power supply system | The three-year date | A continuous run of up to 4 hours and the transfer switch sequence |
| No-start or alarm call | Any | An outage, a failed exercise or a controller alarm | Fault codes, parts used, photos, the test run after repair |
The intervals in rows three to five, and their source, follow below. In FieldRanger every job in the table is carried on a digital work order on the assigned technician's phone, and one job can carry several technicians, so a large unit set by a two-person crew is one job with both technicians on it. A commercial install that takes three days is three jobs, because FieldRanger has no multi-day jobs.
NFPA 110 test intervals, as summarized by the Minnesota Department of Health
30 percent
NFPA sells NFPA 110, the Standard for Emergency and Standby Power Systems, and its text is not reproduced here. The Minnesota Department of Health publishes a summary for licensed health care facilities, based on the 2010 edition that Minnesota's fire code references (Minnesota Department of Health, Inspection and Testing of Emergency Generators, July 2016, revised June 2024). Its intervals, with the NFPA 110 sections it cites:
- Weekly: an inspection of fuel, lubrication, cooling, exhaust, battery and electrical systems (8.4.1).
- Monthly: a diesel set runs "for a minimum of 30 minutes" at "not less than 30 percent" of nameplate kW, or at the manufacturer's minimum exhaust temperature (8.4.2). Warm-up and cool-down do not count.
- Annually, where the building load falls short: a run "with supplemental loads" that ends at "not less than 75 percent of the nameplate kW rating for 60 minutes" (8.4.2.3). The whole test lasts "1.5 continuous hours".
- Every 36 months, Level 1 systems: a continuous test for the generator's assigned class, not required to exceed 4 hours (8.4.9).
- Monthly, transfer switches: an electrical transfer from normal to alternate and back (8.4.6).
The summary adds the NFPA 99 rule for health care facilities: 12 tests a year, at intervals "of not less than 20 days nor more than 40 days". It also states that maintenance and testing follow the manufacturer's recommendations and "the minimum requirements of NFPA 110 and the authority having jurisdiction".
In FieldRanger each interval is a recurring job template on the facility's account. The 20-to-40-day spacing is the dispatcher's check. Conflict detection warns when a moved exercise lands on a day the technician is already booked.
The summary's list of what a monthly test record holds becomes a custom checklist. Its lines include the nameplate kW and 30 percent of it, the transfer switch used and its transfer time, and the cooldown delay. They also include the hour meter at start and stop, oil pressure, temperatures, the load in kW, and any fault with its corrective action. Photos of the controller screen and hour meter attach to the work order and sync to the facility's HubSpot record.
Load banks, hour meters and the 100-hour federal limit
A load bank the contractor owns is booked like any other equipment. The equipment availability calendar shows when each load bank trailer is free and prevents two annual tests from booking it for one morning. A QR scan checks it out to the job, and its usage history shows which technician last towed it.
Federal rules cap testing hours. Under 40 CFR 63.6640(f), an emergency stationary engine covered by that subpart may run "for maintenance checks and readiness testing" for "a maximum of 100 hours per calendar year". In an emergency there is no time limit (40 CFR 63.6640, via Cornell LII, checked November 2026). Twelve 30-minute monthly runs use 6 of those hours. Add a 1.5-hour load bank test and a 4-hour 36-month test, and the year reaches 11.5 hours before warm-up.
Each work order records the hour meter at both ends of the run, and the facility's log carries the annual sum against the 100-hour allowance.
A 22 kW standby install from site visit to first service
- After an outage, a homeowner fills in a HubSpot form, and a contact and deal open. The office books a site visit with an arrival window, and a Twilio text confirms it.
- At the site visit the technician photographs the panel, the gas meter and the pad location. A checklist records the clearances in the manufacturer's installation manual.
- The estimate is built on the HubSpot deal or in FieldRanger: generator, transfer switch, pad, gas piping, electrical work, permit and startup. PandaDoc sends it for signature.
- The deal is won, and FieldRanger creates the install job with the deal's context. The permit and any gas meter change are arranged outside FieldRanger, and their dates go in the customer notes.
- The install is two jobs on two days. Day one sets the pad and unit. Day two connects the transfer switch, and skill-based assignment sends it to a licensed electrician. The generator and switch are checked out of a specific warehouse, and wire and fittings are logged for job costing.
- At startup the technician runs the unit under load, photographs the data plate and takes the homeowner's signature. The invoice is generated from the completed work order, Stripe takes payment, and QuickBooks receives both.
- Completion, notes and photos post to the HubSpot timeline, and job status shows on the deal. A recurring job template opens the maintenance contract, so the first service visit is already scheduled.
A job status change can also trigger a HubSpot workflow, such as a task to register the warranty. Sales Hub Starter includes up to 50 workflows with restricted triggers and actions, and Professional up to 300 (HubSpot, Sales Hub pricing, checked November 2026).
Maintenance contracts and their billing
Generac's maintenance white paper states that "Most generators will need maintenance either quarterly, biannually or annually" (Generac, A Quick Guide to Generator Maintenance, white paper 201901187, checked November 2026). Its essential tasks are inspection, lubrication, cooling and fuel system service, battery testing and engine exercise. Oil and coolant sampling is the advanced step, because the readings "can forecast failures".
A contract in FieldRanger is a recurring job template at that frequency, with the manufacturer's task list as its checklist. Filters, oil and batteries come out of a specific warehouse, and low-stock warnings flag the filter sizes running short. A contract fee can be charged automatically to the customer's card on file, or an annual fee billed in advance is invoiced once, in QuickBooks or from the first visit's work order; the visits under it log parts and time for job costing. Revenue reports then set contract visits beside repair calls on margin.
Generator owners and facility accounts in HubSpot
Homeowners arrive as HubSpot contacts. Hospitals, data centers and municipal sites arrive as companies with several contacts: the facility director, the engineer who signs the log, accounts payable. Contacts and companies sync both ways.
HubSpot's object list contains no work order object (HubSpot Knowledge Base, understand objects, checked November 2026). The unit's service history lives in FieldRanger's work orders and returns to HubSpot as timeline activity, photos and job status. Custom property mapping places the serial number, kW rating, fuel type and NFPA 110 level on the record as HubSpot custom properties. A rep quoting a replacement set reads the repair history first, and revenue attribution follows the account from lead to completed job. The HubSpot field service page lists each record FieldRanger writes back.
Zuper's generator page compared with FieldRanger
Zuper's generator page lists each unit's "make, model, serial number, warranty status, and service history" across customer sites. It adds a customer portal "where clients view their own service history" and Good/Better/Best proposals with deposits (Zuper, generator software, last modified April 10, 2026). Zuper's HubSpot page describes a two-way sync in which a closed-won deal creates the job (Zuper, HubSpot integration, checked November 2026).
For a company that wants a register of every customer's units with warranty dates, or a portal for facility managers, Zuper's kind of product is the better choice. FieldRanger's case is the generator company that sells in HubSpot and wants installs, tests and invoices on the pipeline's own records.
Generator service functions FieldRanger does not cover
Multi-day jobs are not built, so a two-day install is two jobs. Permits and gas meter changes are arranged outside FieldRanger, the dispatcher holds the 20-to-40-day spacing, and the facility's log carries the annual engine-hour total.
Generator service guides and related pages
- Electrical contractor software covers transfer switches and service upgrades; facility management software covers contractors who maintain client buildings.
- Recurring job templates hold contracts and test schedules, and asset tracking holds the load banks.
- Dispatch software covers the board across trades, including the outage-day call that displaces a planned exercise.
Generator service software questions
What is generator service software?
Software that schedules generator installs, inspections, exercise runs, load bank tests and repairs, records each unit's readings on a work order and invoices the work. FieldRanger does this inside HubSpot.
What exercise schedule does NFPA 110 set for an emergency generator?
The Minnesota Department of Health's summary of the 2010 edition states a weekly inspection and a monthly exercise of at least 30 minutes, at no less than 30 percent of nameplate kW for a diesel set. The authority having jurisdiction decides which edition applies.
What does standby generator maintenance involve?
For systems under NFPA 110, the Minnesota Department of Health's summary lists a weekly inspection of fuel, lubrication, cooling, exhaust, battery and electrical systems, a monthly diesel run of at least 30 minutes at 30 percent of nameplate kW or more, a monthly transfer switch test, and an annual run with supplemental load where the building load falls short. Maintenance also follows the manufacturer's recommendations.
What is a generator load bank test?
A test that adds an artificial load when the building's own load is too small. Minnesota's summary describes an annual run with supplemental loads, ending at no less than 75 percent of nameplate for 60 minutes, 1.5 continuous hours in all.
Can FieldRanger schedule generator maintenance contracts?
Yes, as recurring job templates with the manufacturer's task list as the checklist. Contract fees can be charged automatically to a card on file or invoiced.
Does FieldRanger total the hours on a customer's generator?
Each work order records the hour meter at the start and end of the run, with photos. The facility's log carries the annual total against the 100-hour federal testing allowance.
Does generator service software work with HubSpot?
FieldRanger runs inside HubSpot: a won deal becomes the install job, contacts and companies sync both ways, and completions and photos post to the timeline. Zuper also describes a two-way HubSpot sync on its integration page.
A 100 kW diesel set exercised at 30 kW each month leaves twelve test records a year. In FieldRanger each record is a work order under the facility's HubSpot company, with the hour meter photographed at both ends. Transfer switch work is covered under electrical contractor software and the other trades under field service software by industry. Plans are listed on pricing; the Start free trial button opens 14 days with no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo