Industry

Landscape Estimating Software:Landscaping Estimates in FieldRanger and HubSpot

Landscape estimating software on HubSpot: price plantings, hardscape and maintenance bids on the deal or in FieldRanger, then turn the won deal into the job.

Updated 7 min read

Landscape estimating software prices landscape work before the client signs: a planting plan, a paver patio or retaining wall, a season of maintenance, an enhancement or a commercial bid. FieldRanger builds the estimate from the HubSpot deal or contact record, or in FieldRanger tied to that deal, and turns the won deal into the job.

Estimating is the front end of landscaping software, and every later record inherits from it: the crew days, the materials checked out and the invoice. A landscape estimate is not a flat price per call. Its quantities are measured on the site or taken off a plan, in several units at once, and its labor is priced from the crew's production rate.

Quantities and units in a landscape estimate

Units in a landscape estimate and where each quantity comes from
ItemUnitSource of the quantity
Mulch, topsoil, compostCubic yard in bulk, cubic feet in bagsBed area times depth
Pavers and flagstoneSquare foot, plus a cut allowanceMeasured patio or walk area
Base aggregate and bedding sandTon or cubic yardPaved area, extended past the edge, times base depth
Retaining wall blockSquare foot of wall face; caps by the linear footWall length times exposed height
Sod and seedSquare foot or pallet; seed by the poundTurf area
Trees and shrubsEach, by container size or trunk caliperPlant schedule on the plan
Edging and drain pipeLinear footMeasured run
LaborCrew hours at the crew rateProduction rate times quantity
Equipment and disposalHours or days; loads or tonsSkid steer, compactor and trencher time; soil and debris hauled

Bulk materials are sold by volume. Mississippi State University Extension notes that bulk mulch is sold in cubic yards and bagged mulch in cubic feet, and that "one cubic yard equals 27 cubic feet" (MSU Extension, mulch how-to for the landscape, checked November 2026). The estimate converts each bed to cubic yards: area in square feet, times depth in feet, divided by 27.

Hardscape base depth follows the load the surface will carry. Unilock's guideline is "4 to 6 inches for pedestrian walkways and 8 to 12 inches for driveways", with the base extending past the paved edge by a distance equal to its depth (Unilock, paver installation base preparation, checked November 2026). A 20-by-20-foot patio on a 6-inch base therefore needs base under 21 by 21 feet. That is 441 square feet at half a foot deep: 220.5 cubic feet, or about 8.2 cubic yards before any allowance for compaction.

Labor, equipment and overhead in the landscape price

Labor is the line that decides the margin. A landscape estimator prices it from production rates: square feet of pavers laid, plants set or yards of mulch spread per crew hour, as measured on the contractor's own past jobs. Equipment time, travel, dump fees and disposal are priced as their own lines. Overhead is recovered as a markup on costs or spread across the estimated hours.

FieldRanger records what each job actually consumed. Clock-ins and clock-outs against the job record where the technician was, and the materials used are logged for job costing after they are checked out of a specific warehouse. Revenue reports break job revenue and margin out by customer or service type. Read across a season, the gap between estimated and recorded hours on patios, plantings and walls corrects the production rates used in the next bid.

Maintenance contract bids for commercial and HOA properties

A maintenance bid prices a season of service rather than a build. The estimator measures turf area for mowing, bed area for weeding and mulch, and counts the shrubs to prune and the trees to care for. The bid then sets a visit count for each service, such as weekly mowing through the growing season and a fixed number of pruning visits. The season price is the sum of the visits at their per-visit cost, plus any enhancements the property manager wants priced in advance.

On a commercial or HOA property the estimate goes to a property manager, who is a HubSpot contact at the management company. Once the bid is won, recurring job templates turn its visit counts into the season's jobs. The bid's billing terms decide how those visits are invoiced; landscape billing software covers per-visit bills and season contracts paid in installments.

Landscape construction estimating software and public bids

Landscape construction estimating software starts from drawings, not from a site walk. A commercial or public project arrives with a landscape architect's plan, a plant schedule listing species, sizes and counts, and specifications for soil, irrigation and hardscape. The estimator takes off quantities from the sheets and prices them against the specification, in competition with other bidders.

On federal work the labor rate is set by statute. The Davis-Bacon and Related Acts apply to contractors and subcontractors "performing on federally funded or assisted contracts in excess of $2,000" for construction, alteration or repair, and require "no less than the locally prevailing wages and fringe benefits" (U.S. Department of Labor, Wage and Hour Division, checked November 2026). A bid on such a project prices crew hours at the published wage determination, not at the contractor's usual rate.

FieldRanger does not take off quantities from plans. A contractor that wins work by bidding from drawings needs takeoff software for the bid; FieldRanger fits the job once it is won, and the service, enhancement and maintenance estimates for clients already in HubSpot.

A landscape estimate from site measure to scheduled install

  1. A homeowner books a consultation. HubSpot already holds the contact and a deal for the property.
  2. The estimator measures beds, paved areas and walls on site. Photos of the grade, the drainage and the access route attach to the visit's work order and sync to the customer's HubSpot record.
  3. Quantities, with prices from the price book of services, parts and rates, go on an estimate built from the HubSpot deal without leaving HubSpot, or in FieldRanger, where it stays tied to the deal.
  4. PandaDoc carries the estimate and the agreement to the client for signature. Once the client signs, the deal is marked won and FieldRanger opens the job with the address, the scope and the notes from the deal.
  5. The equipment availability calendar books the skid steer and the plate compactor for the install days, so no two crews claim the same machine.
  6. The dispatcher drags each install day onto the calendar as its own job; the landscape scheduling software page covers deliveries, utility locates and rain.
  7. After the install, the located hours and the logged materials sit on the job beside the estimate, and the invoice is generated from the completed work order.

LMN, Aspire and FieldRanger for landscape estimating

Two landscape-specific platforms take estimating further than FieldRanger does. LMN by Granum prices estimates from the contractor's own labor, equipment, material and overhead figures, and lists "pricing and overhead recovery calculators" and "built-in digital takeoffs from aerial images" (LMN by Granum, landscape estimating software, checked November 2026). Aspire combines PropertyIntel's "digital measuring and design tools" with its "catalog items and service kits" to "automatically generate material and labor costs for new jobs" (Aspire, landscape estimating and property measurement, checked November 2026). Neither page names a HubSpot integration.

A contractor that prices from an overhead budget, measures properties from aerial images or builds estimates from service kits is better served by one of those tools. FieldRanger fits the contractor whose sales already run in HubSpot: the estimate sits on the deal, and the job, photos and invoice that follow stay on the same records.

Estimating limits in FieldRanger for landscapers

  • FieldRanger does not measure properties or take quantities off plans or aerial images. The estimator enters the measured quantities.
  • The client signs the estimate through the PandaDoc integration.
  • Progress billing for staged installations is not built; a deposit invoice goes out before the job, and the balance is invoiced on completion.

Frequently asked questions

How to choose a landscaping estimating app?

The choice turns on four questions: whether it measures or imports quantities, whether it prices labor from the contractor's own production rates and overhead, whether the estimate becomes the job without retyping, and whether the estimate lives in the CRM where the lead arrived. FieldRanger meets the last two inside HubSpot; LMN and Aspire go further on measurement and overhead pricing.

What is landscape estimating software?

Software that prices landscape work before the client agrees to it: plantings, hardscape, maintenance contracts, enhancements and bids. In FieldRanger, the estimate is built from the HubSpot deal or contact record or in FieldRanger, and the won deal becomes the job.

How is mulch estimated in cubic yards?

Multiply the bed area in square feet by the depth in feet, then divide by 27, the number of cubic feet in a cubic yard. A 300-square-foot bed mulched 3 inches deep needs 75 cubic feet, about 2.8 cubic yards.

What is the difference between landscaping proposal software and landscaping bid software?

A proposal prices the contractor's own design for one client. A bid prices someone else's plans and specifications in competition with other contractors, so bid software centers on takeoff from drawings.

Can landscaping estimates be built inside HubSpot?

Yes: from the HubSpot deal or contact record, without leaving HubSpot. Estimates built in FieldRanger remain tied to that deal.

Is there a free landscaping estimate app?

A spreadsheet or the free landscaping estimate template produces a priced estimate at no cost, with no link to the CRM, the job or the crew hours. FieldRanger's free trial lasts 14 days and asks for no card.

The yards of base, the plant count and the crew days on a FieldRanger estimate travel with the won deal into the job, where the crew's recorded hours are later set against them. The trade as a whole is covered under landscaping software; plans are on pricing, and Start free trial gives 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo