Industry

Pest Control Fleet Software:Pest Control Fleet Management in FieldRanger and HubSpot

Pest control fleet software on HubSpot: FieldRanger maps each service truck, schedules its maintenance and puts the pesticide vehicle checks on the phone.

Updated 8 min read

Pest control fleet software keeps the records of the trucks that carry technicians and pesticides: each truck's location, its driver, its inspections, its mileage and its next service date. FieldRanger keeps those records inside HubSpot, beside the jobs each truck serves, and tracks the sprayers and tools that ride in it.

The fleet is one part of pest control software, and it answers a different question from the route. Routing orders a technician's stops for the day, as the pest control route optimization page describes. Fleet management concerns the vehicle itself: whether it is fit to drive, whether its load is secured, where it is now and when it was last serviced. In pest control the vehicle is also a storage site for regulated product, which a plumbing van is not.

Pesticide storage and transport rules for service vehicles

Restricted use pesticides set the stakes. EPA restricts these products "to use by a certified applicator" or a person under that applicator's direct supervision, and states that "RUPs are not available for purchase or use by the general public" (EPA, Restricted Use Products Report, updated March 5, 2026). A truck carrying them holds product the public may not buy, parked at a customer's curb.

States write the vehicle rules. The Illinois Department of Public Health's Structural Pest Control Code requires service vehicles that transport or temporarily store pesticides to be "Locked at all times while unattended or not in a locked garage". It adds that "No pesticide product shall be left in an accessible manner in an unattended vehicle" (77 Ill. Adm. Code 830.840, checked November 2026). The same section requires a restraining device for containers in transit, absorbent material for small spills, protective equipment suited to the products carried, a first aid kit with poison control numbers, "a pesticide label for each pesticide transported or temporarily stored" and a complete change of clothing.

Texas regulates the outside of the truck as well as its contents. The Texas Department of Agriculture requires a business licensee to "prominently display its business license number on all vehicles" used for customer contact or service. The number is permanently affixed, preceded by "TPCL #" or the full phrase, on both front fenders or both front door panels, in letters at least two inches tall (4 Tex. Admin. Code § 7.141, amended effective January 16, 2023). The Texas storage rule adds a hard copy of the complete label for every stored pesticide, available to the department's inspector at the storage site (4 Tex. Admin. Code § 7.151, amended effective January 16, 2023). Other states word these rules differently, and the rule that binds a truck is the one where it operates.

State vehicle rules as pre-trip checklist lines

Service vehicle rules and the pre-trip check each one becomes
RuleSourcePre-trip check
Locked while unattendedIllinois 830.840(a)Compartment and cab locked, no product within reach
Restraint for containers in transitIllinois 830.840(b)Containers strapped or racked
Absorbent for small spillsIllinois 830.840(c)Spill material on board
Protective equipment for the products carriedIllinois 830.840(d)Gloves, respirator and eyewear for the day's products
First aid kit with poison control numbersIllinois 830.840(e)Kit present and stocked
A label for each pesticide on boardIllinois 830.840(f)Label for every product checked out today
Change of clothing, stored cleanIllinois 830.840(g)Clothing and shoes on board, bagged
License number on the vehicleTexas 7.141(g)Number on both front doors or fenders, legible

FieldRanger's digital pre-trip and post-trip inspection checklists put the vehicle check on the technician's phone before the truck leaves the lot. Custom checklists are job-specific, so the label and protective equipment lines that depend on the day's products can sit on the work order for the job that uses them.

Live map, fleet alerts and vehicle assignment

Every truck's real-time GPS position appears on FieldRanger's live map. The dispatcher uses it for the call that cannot wait: a restaurant reporting a rodent sighting goes to the nearest truck with a qualified technician, and the reassignment is a drag on the calendar. The pest control dispatch software page covers how that change is made and who is licensed to take the job.

Fleet alerts flag speeding, geofence exits and idle time. An idle-time alert shows a truck running at the curb with no job started. A geofence exit alert shows a truck leaving its service zone, which matters to a company licensed in one state whose territory borders another.

Vehicle assignment shows which trucks are free and which technician has each one. A spare truck goes to the technician whose own truck is in the shop, and the assignment record shows who drove it that day.

Maintenance schedules, fuel and mileage for service trucks

Maintenance scheduling sends reminders for oil changes, inspections and repairs, and each completed service joins that truck's maintenance history. A pest control truck spends its day on short drives and long stops with a spray rig's weight on the back. The service interval comes from the vehicle manufacturer; FieldRanger holds the reminder and the record of the work.

Fuel monitoring tracks fuel use per truck, and utilization reports show usage rates. A truck that sat in the lot all winter appears in the report before the spring season starts, which is when the decision to sell it or staff it is made. Mileage tracking logs odometer readings for expense reports and IRS mileage records; the IRS rules behind that log are on the fleet management software page.

Sprayers, dusters and termite rigs as tracked assets

Pest control fleet & asset management software covers what rides in the truck as well as the truck. A backpack sprayer, a power duster, a termite injection rig or a fogger is equipment with its own maintenance and its own custodian. FieldRanger records each one as an asset: where it is, the technician or job it is assigned to, and a usage history of who used it and when.

A QR code on the sprayer checks it in and out from a phone. The equipment availability calendar shows when the termite rig is free, so two treatments are not booked onto it for the same morning. Equipment maintenance schedules and tracks service for each piece: a sprayer's seal replacement or calibration check is an entry on that sprayer's record. Depreciation tracking shows when the rig is due for replacement.

Product on the truck and the warehouse count

Product moves from the warehouse to the truck to the customer's property. Technicians check product out of a specific warehouse, so the warehouse count shows what left it. Materials used are logged on each job for job costing, and low-stock warnings flag reorders. Each technician's truck can be its own stock location, so the count shows what rides on each truck as well as what left the warehouse.

A service truck's day from won deal to post-trip check

  1. The agreement is sold on a HubSpot deal, with the estimate built on the deal or in FieldRanger. The won deal becomes a job with its context carried over, and recurring job templates create the visits.
  2. The office assigns each technician a truck. The assignment view shows a spare for the technician whose own truck is due for service.
  3. The technician checks the day's product out of the warehouse and completes the pre-trip inspection on the phone before leaving the lot.
  4. The truck's position is on the live map through the day. Fleet alerts reach the office if it speeds, idles or leaves its geofence.
  5. At each property the technician works the job's checklist, photographs conducive conditions and logs the product used. Completions, notes and updates go to the customer's HubSpot timeline.
  6. Each completed work order generates its invoice. Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks.
  7. Back at the lot, the technician completes the post-trip inspection and logs the odometer. A maintenance reminder that has come due appears against that truck.

Fleet maintenance platforms, telematics and FieldRanger

Dedicated fleet tools go deeper on the vehicle. Fleetio, a fleet maintenance platform, states that its users can "Create recurring maintenance tasks to keep vehicles road-ready" and that "Technicians can complete inspections, log repairs and request service right from their phones" (Fleetio, pest control fleet management, checked November 2026). Its page does not mention HubSpot or the scheduling of customer jobs.

A pest control company that runs its own maintenance shop, or needs engine diagnostics, dashcams or hours-of-service logging, is better served by a fleet maintenance or telematics platform. FieldRanger fits the company that sells its agreements in HubSpot and wants the truck, the technician and the visit on records that meet at the job.

Pest control fleet limits in FieldRanger

  • FieldRanger does not compute load weight or materials-of-trade limits for the truck.
  • Compliance with the state vehicle rule rests with the licensed business. FieldRanger holds the checklist and the record.
  • Plans are priced per technician on pricing, and the 14-day trial needs no card.

Frequently asked questions

What is pest control fleet software?

Software that keeps the records of a pest control company's service trucks: GPS location, driver assignment, inspections, mileage, fuel and maintenance. FieldRanger keeps those records beside the jobs each truck serves, and the jobs sit on HubSpot deals.

What does pest control fleet and asset management software track?

The trucks and the equipment they carry. In FieldRanger the trucks have live GPS tracking, inspections and maintenance reminders; sprayers, dusters and rigs are assets with QR check-in and check-out, assignment to jobs and maintenance records.

Do pest control trucks carrying pesticides have to be locked?

In Illinois, service vehicles that transport or store pesticides must be locked at all times while unattended or not in a locked garage, under 77 Ill. Adm. Code 830.840. Other states set their own rules, and the rule that applies is the one where the truck operates.

Can restricted use pesticides be carried on a pest control service truck?

EPA limits restricted use pesticides to certified applicators and people under their direct supervision. The storage and transport conditions on the truck come from the state's pesticide rules, such as the Illinois service vehicle section.

Does FieldRanger replace a GPS fleet tracking system?

FieldRanger shows every vehicle on a live map, with route history and alerts for speeding, geofence exits and idle time. A company that needs engine diagnostics, dashcams or hours-of-service logs adds a telematics platform.

Does pest control fleet software work with HubSpot?

FieldRanger runs inside HubSpot. Vehicle records stay in FieldRanger; the jobs those vehicles serve are tied to HubSpot deals, and each completed visit is logged to the customer's HubSpot timeline.

Illinois treats a pest control truck as a pesticide store that stays locked when left unattended outside a locked garage, and Texas treats its front doors as the place the license number is shown. FieldRanger keeps the inspection, maintenance and asset records that answer both rules for each truck, and every visit the truck made sits on the HubSpot customer record. Licensed job assignment is covered by pest control dispatch software, the whole trade by pest control software, and per-technician plans with a 14-day Start free trial, no card, by pricing.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo