Industry
Plumbing Time Clock App:Located Clock-Ins, On-Call Hours and Overtime Records in HubSpot
Plumbing time clock app on HubSpot: each clock-in records where the plumber was, hours log to the service call, and the record covers overtime and call-outs.
A plumbing time clock app records when each plumber starts and stops work, on which call and where. In FieldRanger the plumber's phone is the clock: each clock-in and clock-out stamps the plumber's position and puts the time on the service call, and the job sits on the customer's HubSpot record beside the invoice it produced.
Time tracking is the payroll and job-costing record inside plumbing software, and a plumber's day breaks it into small pieces. A service plumber may clear a drain, replace a fill valve, stop at the supply house for a water heater and finish with a leak that runs past five. An on-call week adds a pager and the chance of a burst pipe at night. Each piece of that day is either hours worked or not, under federal wage rules, and the time record has to show which.
Located clock-ins on plumbing service calls
Each service call is a FieldRanger job, assigned to one plumber or to a journeyman and an apprentice together, since one job can carry several technicians. Arrival at the address starts the clock and departure stops it; both events carry the phone's position, and the minutes between them belong to that call. A clock-in stamped at the supply house rather than at the customer's address reads as such on the job. The app keeps working without signal, so a clock-in in a basement with no reception syncs when the phone is back online.
The location is taken at the clock event, not as a trail through the day. The van is a separate record: vehicle tracking shows each van's position on a live map, fleet alerts flag speeding, geofence exits and idle time, and odometer logging records miles for IRS mileage records.
Time between jobs belongs to no job. The drive from a drain call to the supply house and on to the next customer runs from one clock-out to the next clock-in, and the gap is visible on the record. The payroll review counts drive and parts-run time from those gaps between clock events.
On-call weeks and after-hours emergency call-outs
Emergency plumbing produces the hours that are hardest to classify. Federal rules separate waiting from working. A worker "required to remain on call on the employer's premises or so close thereto that he cannot use the time effectively for his own purposes is working while 'on call'". A worker who is "merely required to leave word at his home or with company officials where he may be reached is not working while on call" (29 CFR 785.17, checked November 2026). A plumber at home with the on-call phone is in the second position until the phone rings.
The call-out changes the count. Under 29 CFR 785.36, when an employee "who has gone home after completing his day's work is subsequently called out at night to travel a substantial distance to perform an emergency job for one of his employer's customers all time spent on such travel is working time" (29 CFR 785.36, checked November 2026). The same section takes no position on a call that sends the worker back to the regular place of business first.
In FieldRanger, the emergency is a job created when the call comes in and dragged onto the on-call plumber's calendar. A push notification alerts the plumber to the new job. The clock-in records the arrival at the flooded basement and the clock-out records the end of the repair. The night drive is not on the job clock; the van's position on the live map and its odometer log show the trip, and the office adds that time to the call-out's hours.
Overtime records under 29 CFR 516.2
A plumbing shop that pays hourly plumbers keeps the federal payroll record for non-exempt employees. The record includes the "Time of day and day of week on which the employee's workweek begins", the "Hours worked each workday and total hours worked each workweek", and the "Total premium pay for overtime hours" (29 CFR 516.2, checked November 2026). The rule defines a workday as "any fixed period of 24 consecutive hours". Overtime under section 7(a) "must be compensated at a rate not less than" one and one-half times the regular rate (29 CFR 778.107, checked November 2026).
FieldRanger supplies the hours side of that record and not the pay side:
| Record item under 29 CFR 516.2 | FieldRanger source |
|---|---|
| Workweek start | Set by the employer; reports run on that week |
| Hours worked each workday | Clock-ins and clock-outs on each day's jobs, totalled in a custom report |
| Total hours each workweek | The same report summed by week |
| Drive time between calls and night call-out travel | Gaps between clock events; van position and odometer log |
| Regular rate, straight-time earnings, overtime premium | The payroll system, not FieldRanger |
FieldRanger does not run payroll or calculate overtime. Custom reports total hours by plumber, day and week, are emailed on a schedule and download as CSV or Excel for the payroll system. A week with two night call-outs shows each call-out as its own job, with its own clock events, on the weekly report.
New Jersey's written notice rule for tracked vans
New Jersey regulates tracking a vehicle an employee drives. Under P.L. 2021, chapter 449, an employer who "knowingly makes use of a tracking device in a vehicle used by an employee without providing written notice to the employee" faces a civil penalty "not to exceed $1,000 for the first violation and not to exceed $2,500 for each subsequent violation" (New Jersey Legislature, P.L. 2021, c. 449, approved January 18, 2022). The law took effect on the 90th day after enactment.
The definition decides what the law reaches. A "tracking device" is one "designed or intended to be used for the sole purpose of tracking the movement of a vehicle, person, or device", and the definition excludes "devices used for the purpose of documenting employee expense reimbursement" (same source). A GPS unit fitted to a service van to show it on a map fits those words more closely than a plumber's phone, which does many other things. A New Jersey shop that tracks its vans gives each plumber written notice before the van goes out, and the employer's counsel decides how the definition applies to its own hardware.
The notice is also the place to state what the time clock app records. In FieldRanger the phone records location at clock-in and clock-out, and the van's position is recorded through vehicle tracking.
A burst pipe call-out from page to weekly report
- At 11:20 p.m. the answering service reaches the on-call dispatcher, who creates an emergency job for the customer; the customer's contact syncs with HubSpot.
- The dispatcher drags the job onto the on-call plumber's calendar, and a push notification reaches the plumber's phone.
- The plumber drives from home. The van's position shows on the live map, and the odometer log records the miles.
- On arrival the plumber clocks in, and the clock-in records the location at the customer's address.
- The plumber photographs the split line before and after the repair, logs the fittings used against the job and clocks out at 1:05 a.m.
- The customer signs the work order, and the invoice is generated from the completed work order.
- On Monday the weekly custom report shows the call-out as its own job with its own clock events, and the office adds the night drive before exporting the hours to payroll.
- The job completion, notes and photos are logged to the HubSpot timeline, where the next call from that customer starts.
Moving the next morning's booked calls to make room for a tired plumber is the dispatcher's work on plumbing scheduling software.
Clocked hours against flat-rate prices
A flat-rate price book assumes a number of minutes for each task, and clocked hours test the assumption. Time logged against each job, materials logged on each job, and revenue reports by service type show what a water heater swap or a drain clearing actually took. Technician performance reports show completion rates, on-time arrivals and productivity by plumber. A task whose clocked hours keep exceeding its flat-rate allowance is repriced from the shop's own data rather than from memory.
Plumbing time clock apps and FieldRanger
A standalone plumbing time clock app and FieldRanger answer different questions. ClockShark's plumbing page describes "GPS-backed time entries", lets a company "Create geofences around jobsites" and ties hours to specific jobs so "payroll runs faster" (ClockShark, plumbing, checked November 2026). HubSpot appears nowhere on it.
A plumbing company that wants its time clock wired directly into its payroll provider is better served by a dedicated time app of that kind. FieldRanger fits the plumbing company that sells and services through HubSpot and wants each clocked hour on the job, the customer and the deal that the call came from.
Plumbing hours FieldRanger does not record
- Location is recorded at clock-in and clock-out, not continuously.
- Drive time, supply-house runs and on-call standby have no separate time entry.
- Overtime premiums are left to the payroll system, which receives the hours as a CSV or Excel export.
Frequently asked questions
What is a plumbing time clock app?
An app on the plumber's phone that records when work starts and stops, on which job and where. In FieldRanger, each clock event carries the plumber's position, and the hours land on a service call that belongs to a HubSpot customer.
Is on-call time paid for plumbers?
Under 29 CFR 785.17, a plumber who only has to leave word where the plumber can be reached is not working while on call. A plumber required to stay at or near the shop so that the time cannot be used for personal purposes is working.
Is travel to an after-hours emergency call paid time?
Under 29 CFR 785.36, travel by an employee called out at night to go a substantial distance to an emergency job for a customer is working time.
Does New Jersey require notice before tracking a plumber's van?
Yes. P.L. 2021, chapter 449 requires written notice to the employee before an employer knowingly uses a tracking device in a vehicle the employee uses, with civil penalties up to $1,000 for a first violation and $2,500 for each later one.
Does FieldRanger track plumbers' location all day?
No. FieldRanger records the phone's location at clock-in and clock-out. Van location comes from vehicle tracking on the live map.
Does FieldRanger calculate overtime for plumbers?
No. FieldRanger totals hours by plumber, day and week in custom reports that export to CSV or Excel; the payroll system calculates overtime.
In FieldRanger the 11:20 p.m. call-out keeps its own job, its own located clock events and its own line on Monday's report, beside the night drive that 29 CFR 785.36 counts as working time. Per-technician plans are on pricing, with Start free trial for 14 days and no card; the rest of the trade is on plumbing software.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo