Industry

Plumbing Billing Software:Invoices and Payments That Run on HubSpot

Plumbing billing software on HubSpot: FieldRanger builds the invoice from the completed work order, takes payment on site through Stripe and syncs QuickBooks.

Updated 6 min read

Plumbing billing software turns a finished plumbing job into an invoice and collects payment for the labor, parts and permit fees, priced flat rate or time and materials. FieldRanger generates the invoice from the completed work order, takes payment in the field through Stripe, syncs with QuickBooks, and shows job status on the HubSpot deal.

Billing is the last step of FieldRanger's plumbing software. It is also the step where errors cost cash. A plumbing invoice app, plumbing invoice software and plumber invoicing software are the same purchase under different names; the plumbing and HVAC versions differ only in the parts on the invoice. What separates the tools is where the invoice comes from: a form someone fills in after the job, or the work order the plumber closed on site.

Flat rate and time and materials on a plumbing invoice

A plumbing invoice is built one of two ways. A flat-rate invoice charges one price per task, set before the work starts: replace a 50-gallon water heater, clear a main line, rebuild a toilet. A time-and-materials invoice charges hours at a labor rate plus each part at its marked-up price, which suits a slab leak or a remodel where the scope is unknown until the wall is open.

Both need the same two records from the job. FieldRanger logs time against each job as the plumber clocks in and out, with the location recorded at each clock event. Parts and materials used on each job are logged for job costing, and technicians check stock out of a specific warehouse or their own truck, so the parts on the invoice match the parts that left the shelf or the truck.

Hours raise one documented limit in HubSpot's own invoices. If a HubSpot invoice offers online payment, "line item quantities must be whole numbers" (HubSpot, create invoices, updated September 24, 2026). A plumber's 1.5 hours cannot be billed as a quantity of 1.5 on such an invoice; the labor is priced as a single line or billed in a smaller whole unit.

Parts, permits and sales tax lines

The lines below a plumbing invoice's labor are where tax rules apply, and they differ by state. In Texas, the Comptroller states that "labor to repair, remodel, or restore residential real property is not taxable", while "the total amount charged for remodeling, repairing, or restoring nonresidential real property is taxable" (Texas Comptroller, publication 94-116, March 2007 edition, checked November 12, 2026). The same publication separates two contract forms. Under a lump-sum contract, the contractor pays tax on materials when buying them and charges the customer no tax. Under a separated contract, the invoice itemises materials and labor, and the materials charge may not be lower than the contractor paid for them.

The consequence for a Texas plumbing invoice is structural. The same water heater replacement is billed differently for a house and for a restaurant, and a separated contract needs parts and labor on separate lines. Other states set their own rules, so the line layout of a plumbing invoice is decided with the company's accountant, not by the software. Permit fees passed through to the customer belong on a line of their own for the same reason.

A plumbing job from completed work order to paid invoice

  1. The plumber finishes the work and records it on the work order in the FieldRanger mobile app: checklist items, before and after photos of the old and new fixture, notes.
  2. The customer signs on the phone as proof of completion.
  3. FieldRanger generates the invoice from the completed work order, with the hours and parts recorded against the job.
  4. The plumber takes payment in the field through FieldRanger's Stripe integration.
  5. The invoice and the payment sync with QuickBooks for the bookkeeper.
  6. In HubSpot, the deal shows the job's status, the completion and notes are logged to the timeline, and the job photos sync to the customer's record.
  7. The office verifies the day: every completed work order has an invoice, and every invoice paid in the field appears in QuickBooks.

Scheduling before step 1, from the emergency call to the routed van, is covered on the plumbing scheduling software page.

Card fees on a plumbing invoice

Payment in the field moves money faster and costs a fee. Stripe's published United States rates are 2.9% plus 30 cents for an online domestic card payment, 2.7% plus 5 cents for an in-person card-present payment, and 0.8% capped at $5.00 for ACH Direct Debit (Stripe pricing, checked November 12, 2026).

Stripe fees on a sample $1,850 plumbing invoice, at Stripe's published United States rates
Payment methodRateFee
Online domestic card2.9% + $0.30$53.95
In-person card present2.7% + $0.05$50.00
ACH Direct Debit0.8%, capped at $5.00$5.00

The $1,850 is a sample invoice. The difference between the card and ACH lines grows with the ticket, and it is the number to weigh before offering bank payment on a repipe or a sewer line replacement.

Revenue, margin and the HubSpot record after payment

Once a job is billed, FieldRanger's revenue reports show job revenue and margin by customer or service type. Drain clearing, water heater replacement and new construction can then be compared on the margin each produces. Revenue can also be followed from the original lead to the completed job in HubSpot reports.

A job status change can trigger a HubSpot workflow, such as a follow-up email to the customer or a task for the office when a job is marked complete. The Sales Hub pricing page lists up to 50 workflows with restricted triggers and actions on Starter and up to 300 fully customizable workflows on Professional (HubSpot, Sales Hub pricing, checked November 2026).

Plumbing invoice software from trade platforms

Competing plumbing tools add billing for staged work and their own pricebooks. Housecall Pro's plumbing page lists progress invoicing for multi-stage jobs, auto-charging of cards on file, Tap to Pay and QuickBooks Online sync (Housecall Pro, plumbing software, checked November 12, 2026). ServiceTitan's plumbing page describes estimates adjusted and signed in the field, and its site menu lists Pricebook Pro as a Pro product with no price shown (ServiceTitan, plumbing software, checked November 13, 2026). A builder-facing plumbing company that bills new construction in draws should test those tools, since progress billing is not built in FieldRanger; neither page mentions HubSpot.

FieldRanger fits the plumbing company that sells and markets in HubSpot and wants the invoice, the job and the customer on one record.

Limits of FieldRanger for plumbing billing

FieldRanger generates the invoice from the completed work order, built from a price book of services, parts and rates, and invoices can stay in FieldRanger or sync to HubSpot as HubSpot invoices. A deposit invoice can go out before a large job, with the balance invoiced on completion, and recurring maintenance work can be charged automatically to a card on file. Progress or draw billing is not built, and sales tax rules by state are set with the accountant. The accounting system of record is QuickBooks.

Frequently asked questions

What is plumbing billing software?

Plumbing billing software produces the invoice for a finished plumbing job, with labor, parts and fees, and collects the payment. FieldRanger generates the invoice from the completed work order and takes payment in the field through Stripe.

How do plumbers invoice customers?

Either flat rate, one price per task agreed before the work, or time and materials, hours at a labor rate plus parts. Both need the hours and the parts recorded against the job, which FieldRanger logs as the plumber clocks in and out and checks out materials.

Is there a plumbing invoice app for the field?

FieldRanger's mobile app for technicians holds the work order, the checklist, the photos and the customer's signature, and the invoice is generated from that completed work order.

Should a plumbing invoice charge sales tax?

It depends on the state and the property. In Texas, labor to repair residential real property is not taxable and the total charge for nonresidential repair is taxable, according to Comptroller publication 94-116. A plumbing company sets its invoice lines with its accountant.

Does FieldRanger sync plumbing invoices with QuickBooks?

Yes. FieldRanger syncs invoices and payments with QuickBooks.

How much do card payments cost on a plumbing invoice?

At Stripe's published United States rates, checked November 12, 2026, an online domestic card payment costs 2.9% plus 30 cents and ACH Direct Debit costs 0.8% capped at $5. On a $1,850 invoice, that is $53.95 by card online and $5.00 by ACH.

Plans for plumbing companies are priced per technician on pricing. Start free trial on the HubSpot portal already in use, 14 days with no card, and bill the first completed work order from it.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo