Industry
Fuel Delivery Dispatch Software:Keep-Full and Will-Call Propane Scheduling in FieldRanger and HubSpot
Fuel delivery dispatch software on HubSpot: FieldRanger schedules keep-full and will-call propane and heating oil fills, routes each driver and logs every fill.
Fuel delivery dispatch software decides which customer tanks each truck fills on a given day, and in what order. FieldRanger schedules keep-full and will-call propane and heating oil deliveries on a drag-and-drop calendar, builds each driver's route and records every fill on the customer's HubSpot record.
Dispatch is one part of propane delivery management software. Two order types shape it. A keep-full customer never calls: the company estimates when the tank will need fuel and sends a truck. A will-call customer reads the gauge and phones in. Fuel delivery scheduling software has to run both on one board, so that a cold week of will-call orders does not push keep-full tanks past empty. The trucks themselves, their hazmat checks and their cargo tank tests are covered on propane and fuel delivery fleet management software.
Will-call, keep-full and out-of-gas orders
| Order type | Who sets the date | What dispatch works from | What goes wrong | FieldRanger handling |
|---|---|---|---|---|
| Keep-full (automatic) | The company | Last fill date, tank size, estimated daily use | A run-out when use outpaces the estimate; a short fill when the truck comes too early | Jobs loaded in bulk from the office's due list, or recurring job templates for steady users |
| Will-call | The customer | The order, with the gauge reading and access notes | A late call during a cold spell | A job on the calendar inside an arrival window |
| Out-of-gas | The customer, after the tank is empty | An emergency call | Refilling without the safety steps | A priority job matched to a qualified technician, with a safety checklist |
| New tank set and first fill | The company | The install date and the leak test | Fuel delivered before the system is checked | A service job, then a delivery job |
A keep-full route is planned days ahead and can be packed tightly. A will-call order arrives the same morning and has to fit into a route already on the road. Dispatching software for fuel delivery has to reconcile the two on one route.
Degree days and keep-full planning
Keep-full scheduling rests on degree days. The U.S. Energy Information Administration defines a heating degree day against a base temperature of 65°F: a day with a high of 33°F and a low of 25°F has a mean of 29°F and counts as 36 heating degree days. EIA names the National Weather Service Climate Prediction Center as a source of historical temperature and degree-day data (EIA, degree days, checked November 2026).
A propane or heating oil company turns that measure into a delivery date with a K-factor: the gallons a customer burns per degree day, worked out from past fills. Degree days since the last fill, times the K-factor, estimate the gallons used. When that estimate nears the tank's usable capacity, the delivery is due. A tank that also heats water burns fuel on warm days, so its estimate carries a daily base use as well.
FieldRanger does not compute degree days or K-factors, and it has no weather feed. The calculation stays in the office's spreadsheet or delivery-forecasting system, which produces the list of tanks due. The office enters that list as FieldRanger jobs, and bulk scheduling assigns them in one batch. Capacity planning then shows which drivers are already full, territory management keeps each tank with the driver who covers its zone, and auto-routing orders each driver's stops for the day. Customers whose use is steady across the year, such as a tank serving only a water heater, can sit on recurring job templates instead.
Will-call orders, out-of-gas calls and safety steps
A will-call order arrives by phone, email, HubSpot form or online booking, and calls through HubSpot calling or Aircall are logged on the customer's HubSpot record. The office turns each order into a job on the calendar with an arrival window. The work order carries the tank location, gate code and gauge reading. A Twilio text can confirm the delivery day to the customer. The dispatcher drags the job onto a driver already working that area, the route adjusts around the new stop, and a push notification puts it on the driver's phone.
An out-of-gas call is a different job. Florida's rule for licensed LP gas dealers sets the order of work. Before filling a container that ran out, the dealer closes all container valves and checks that appliances and appliance outlets are closed. Where the customer is absent, the dealer closes the valves and leaves written notice: the company's name and number, the work done, any unsafe condition, a number to call for restoration and a warning against reactivation by unauthorized persons. Where the supply was interrupted, the system gets a documented leak test under Annex C of NFPA 54 before it returns to service (Fla. Admin. Code R. 5J-20.044, Cornell LII, amended July 10, 2019, checked November 2026).
The dispatch question is who can do that work. Skill-based assignment matches the job to a technician certified for leak testing and restoration, rather than to the nearest driver. The checklist on the work order records each valve closed, each appliance checked and the leak test result; a photo records the notice left on the door. Where the fill and the restoration are done by different people, one job carries both the driver and the service technician, and its status shows the dispatcher whether service is back on.
Driver hours under 49 CFR 395
Hours-of-service rules set the length of a delivery day before any route does. A property-carrying driver needs 10 consecutive hours off duty before driving, may not drive beyond the 14th consecutive hour after coming on duty, may drive 11 hours in that window and must take a 30-minute break once 8 hours of driving have passed. The weekly limit is 60 hours on duty in 7 days or 70 hours in 8 days, and a 34-hour off-duty period restarts it (49 CFR 395.3, Cornell LII, checked November 2026).
Local delivery drivers can use the short-haul exception. A driver who stays within a 150 air-mile radius of the normal work reporting location, returns there and is released within 14 consecutive hours, with 10 hours off between shifts, is exempt from the record-of-duty-status rules in 395.8 and 395.11. A driver who meets adverse driving conditions may drive up to two additional hours (49 CFR 395.1, Cornell LII, checked November 2026).
A heating fuel shortage can suspend those limits. When a governor declares an emergency caused by a shortage of residential heating fuel, 49 CFR 390.23 grants relief to carriers delivering that fuel in the designated area. The declaration can be extended by two further 30-day periods, and the emergency may not exceed 90 days in total (49 CFR 390.23, Cornell LII, checked November 2026).
FieldRanger is not an electronic logging device and does not calculate hours-of-service limits. Its clock-ins and clock-outs record when and where each driver started and finished, with time logged against each delivery. A driver who clocked in at 5 a.m. reaches the end of the 14-hour window at 7 p.m.; a dispatcher adding a late will-call reads that clock-in before dragging the job onto the driver's route. A route that keeps the driver out past the window also ends the short-haul exception for that day.
The dispatch board on a January cold snap
- Overnight, the office's degree-day sheet flags the keep-full tanks due within the next three days. The office enters them as jobs and assigns them in one batch with bulk scheduling, each to the driver for its territory.
- At 6 a.m., the dispatcher reads the multi-technician view: each driver's column, assignments and free time. Capacity planning shows two drivers already at a full day; the dispatcher moves their lowest-priority fills to tomorrow.
- Voicemail and the HubSpot form bring twelve will-call orders. Each becomes a job in an arrival window and lands on the driver whose route passes nearest.
- At 9:40 a.m., an out-of-gas call arrives. The job goes to a technician certified for leak testing, conflict detection warns that the job overlaps a booked delivery, and the dispatcher moves the delivery to the afternoon.
- Routes adjust as stops are added. At each tank the driver photographs the gauge before and after the fill and types the delivered gallons, read off the printed ticket, into the job notes.
- At 4 p.m., the dispatcher checks clock-in times against the 14-hour window before handing out the last will-calls.
- Each completed fill generates its invoice from the work order, or autopay charges a keep-full customer's card on file; invoices and payments sync with QuickBooks, and the fill is logged to the customer's HubSpot timeline.
Territories, routes and the bulk plant
A fuel dispatch board is organized by delivery zone. Territory management defines service zones and assigns drivers to them; service area mapping shows coverage and gaps, such as a new subdivision no driver's zone yet includes. Multi-stop planning treats a driver's fills as one route from the bulk plant, live traffic adjusts arrival times, and route history shows how past routes ran. Stop sequence and drive time are covered on fuel delivery routing software, and the general case of a same-day board on dispatch software.
Delivery records on the HubSpot customer
A fuel customer's record in HubSpot carries the account; FieldRanger adds the deliveries. Tank size, delivery type and last fill date can be carried into HubSpot custom properties by field mapping, so a marketer can build a list of will-call customers who have not ordered since spring. Each completed fill and its notes appear on the HubSpot timeline, and the completion can start a HubSpot workflow that emails a delivery confirmation. Revenue can be followed from lead to completed delivery in HubSpot reports, which separates customers won by a tank-set offer from those won through a referral. The page on HubSpot field service describes the rest of what FieldRanger writes into HubSpot.
Fuel dispatch functions outside FieldRanger
- No degree-day or K-factor calculation, and no weather feed.
- No tank monitor integration or usage-triggered delivery.
- No meter or register link; delivered gallons are typed in by the driver.
- No electronic logging device or hours-of-service calculation.
- No multi-day jobs; each delivery day is its own job.
A retailer whose keep-full schedule is computed nightly from degree days and tank monitors needs delivery software that performs that computation. FieldRanger can take that system's due list as jobs but does not replace it. It fits the propane or heating oil company that sells through HubSpot, runs a mix of keep-full and will-call customers and wants every fill, out-of-gas call and leak test on the same customer record.
Frequently asked questions
What is fuel delivery dispatch software?
Software that assigns propane and heating oil deliveries to drivers, orders each driver's stops and records each fill. FieldRanger does this on a drag-and-drop calendar inside HubSpot, with routes built automatically and every fill logged to the customer's timeline.
What is fuel delivery scheduling software?
Software that sets the dates of keep-full and will-call deliveries. FieldRanger schedules the jobs, in bulk or as recurring templates; the degree-day calculation behind keep-full dates stays in a separate forecasting tool or spreadsheet.
What is the difference between keep-full and will-call propane delivery?
On keep-full, the company estimates the customer's use and schedules the fill without being asked. On will-call, the customer watches the tank gauge and orders a delivery.
How are degree days used to schedule propane deliveries?
Heating degree days measure how far the day's mean temperature falls below 65°F. Degree days since the last fill, times the customer's gallons per degree day, estimate the fuel used and the date the tank needs a fill.
What hours-of-service rules apply to propane delivery drivers?
Under 49 CFR 395.3, a property-carrying driver may drive 11 hours within a 14-hour window after 10 hours off. Local drivers who return within 14 hours and stay inside 150 air miles can use the short-haul exception in 395.1(e).
What must a propane dealer do on an out-of-gas call?
Florida's rule 5J-20.044 requires closing all container valves and checking appliances before filling, leaving written notice when the customer is absent, and a documented leak test before an interrupted system returns to service. Other states set their own rules.
How much does fuel delivery dispatch software cost?
FieldRanger charges per technician, and the plans sit on the pricing page. Start free trial covers 14 days without a card.
A fuel dispatcher in FieldRanger works from three clocks at once: the degree days behind each keep-full tank, the arrival window promised to each will-call customer and the 14-hour window on each driver's clock-in. The trucks behind those deliveries are covered on propane and fuel delivery fleet management software, the wider business on propane delivery management software, and the per-technician plans on pricing.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo