Industry

Commercial Refrigeration Software:Walk-Ins, Reach-Ins, Ice Machines and Leak Repair Records in FieldRanger and HubSpot

Commercial refrigeration software on HubSpot: FieldRanger dispatches walk-in, reach-in and ice machine calls by EPA 608 type and dates each leak follow-up.

Updated 10 min read

Commercial refrigeration software schedules and records the service of walk-in coolers and freezers, reach-ins, display cases, rack systems and ice machines, from the emergency call to the paid invoice. FieldRanger does this inside HubSpot. Each call goes to a technician certified for the equipment, and each repair's refrigerant, parts and photos land on the customer's record.

Commercial refrigeration is listed separately under field service software by industry because its customer and its clock differ from comfort cooling. The customer is a restaurant, a grocer, a convenience store or a cold storage warehouse. A failed walk-in costs the customer product, not comfort, so the call cannot wait for a convenient slot. The equipment also carries federal refrigerant rules sized by the pound, which decide what each repair visit has to record.

Walk-ins, reach-ins, display cases and ice machines

Commercial refrigeration equipment and the record each service call leaves
EquipmentRefrigerant class under EPA rulesCommon callsRecord on the FieldRanger work order
Reach-in cooler or freezer, undercounter ice makerFactory-sealed with 5 pounds or less: a "small appliance"Compressor, condenser fan, door gasket, thermostatData-plate photo, parts used, signature
Walk-in cooler or freezer with a condensing unitField-charged; the full charge decides which leak rule appliesNo-cool, defrost failure, iced evaporator, door heaterBox temperature, pounds of refrigerant added, leak location, photos
Supermarket rack and display casesLarge central charge, can exceed 15 or 50 poundsPreventive maintenance, leak inspection, case cleaningPounds added, verification test dates, inspection checklist
Modular ice machine and binSelf-contained or remote condenserCleaning and sanitizing, scale, harvest problemsCleaning date, filter change, cleaner and sanitizer used

The "small appliance" line comes from EPA's definition: an appliance "fully manufactured, charged, and hermetically sealed in a factory" with "five (5) pounds or less of refrigerant". The examples named include "refrigerators and freezers", "under-the-counter ice makers", "vending machines" and "drinking water coolers". The same section defines commercial refrigeration as the appliances "used in the retail food and cold storage warehouse sectors" (40 CFR 82.152, via Cornell LII, checked November 2026).

Section 608 technician types and skill-based assignment

Refrigerant work requires certification by appliance type. Under 40 CFR 82.161, "any person who could be reasonably expected to violate the integrity of the refrigerant circuit" must be certified. Small appliances require Type I. Medium-, high- and very high-pressure appliances require Type II, low-pressure appliances require Type III, and Universal covers all three. A copy of each certificate is kept at the place of business (40 CFR 82.161, via Cornell LII, checked November 2026).

The table above therefore sorts the calls before anyone is dispatched. A factory-sealed reach-in is Type I work; a walk-in condensing unit or a rack system is Type II work. Skill-based assignment in FieldRanger matches jobs to technicians by certification and expertise, so a technician holding only Type I never receives the walk-in. The certification sits on the technician's record, and the multi-technician view shows every technician's availability and current assignments side by side.

Leak repair rules for 50-pound and 15-pound appliances

Two federal rules now govern a leaking commercial system, split by refrigerant. The older rule, under Clean Air Act Section 608, covers ozone-depleting refrigerants such as R-22. As of April 10, 2020, it "applies only to appliances with a full charge of 50 or more pounds" of a class I or class II refrigerant. The owner or operator "must calculate the leak rate every time refrigerant is added", and the records are kept for at least three years (40 CFR 82.157, via Cornell LII, amended April 10, 2020). EPA's summary sets the commercial refrigeration trigger at a 20 percent leak rate over 12 months and requires repair "within 30 days from the date the leak was discovered" (EPA, stationary refrigeration leak repair requirements, last updated December 8, 2025).

The newer rule, under the AIM Act, covers HFCs. Beginning January 1, 2026, it applies to appliances with a charge of 15 pounds or more of a refrigerant containing an HFC, or of a substitute with a global warming potential above 53. Residential and light commercial air conditioning is exempt. Commercial refrigeration again triggers at 20 percent, and the leaks are repaired within 30 days of the refrigerant addition that showed the rate was exceeded (EPA, ER&R leak repair fact sheet, January 2026).

Leak repair obligations for a commercial refrigeration appliance (EPA sources above)
Provision40 CFR 82.157 (Section 608)40 CFR 84.106 (AIM Act, from January 1, 2026)
Appliances coveredFull charge of 50 pounds or more of a class I or class II refrigerantCharge of 15 pounds or more of an HFC, or a substitute above 53 GWP
Commercial refrigeration trigger20 percent leak rate20 percent leak rate
Repair window30 days from discovery30 days from the refrigerant addition
VerificationInitial and follow-up verification testsInitial and follow-up verification tests for each leak repaired
Inspections after a leakNot summarized on EPA's page; see 40 CFR 82.157Every three months at 500 pounds or more; once a year from 15 to 500 pounds
ReportingNot summarized on EPA's page; see 40 CFR 82.157A report to EPA by March 1 for an appliance leaking 125 percent or more of its full charge in a year
RecordsAt least three yearsThree years, paper or electronic

FieldRanger records the service. The leak-rate calculation sits with the owner or operator, and the contractor's work order supplies the inputs. On each repair job the checklist records the refrigerant, the pounds added, the leak location and the repair made, with photos of the leak site and the data plate. Each unit's model, serial number, refrigerant and full charge go in the customer notes, where every technician sees them on the next visit.

The 30-day window becomes dated jobs. The repair job carries the date refrigerant was added. The verification test is booked as its own job on the calendar, and a recurring job template holds the annual or quarterly leak inspection until the owner's calculations show the appliance has stayed under the threshold for the period the rule sets. A job status change can also trigger a HubSpot workflow, such as a task for the account manager to send the owner the repair record. Sales Hub Starter includes up to 50 workflows with restricted triggers and actions, and Professional up to 300 (HubSpot, Sales Hub pricing, checked November 2026).

Ice machine cleaning on a six-month cycle

Ice machines run on the manufacturer's maintenance schedule. Manitowoc's manual for its QF0400 flake ice machines states: "Clean and sanitize the ice machine every six months for efficient operation." The full cleaning and sanitizing procedure "must be performed a minimum of once every six months": all ice is removed from the bin, the machine and bin are disassembled, cleaned and sanitized, and the ice made during the procedure is discarded. The air-cooled condenser is cleaned at least every six months as well. A machine that needs more frequent cleaning calls for a qualified service company to test the water and recommend treatment, and the manual notes that maintenance procedures are not covered by the warranty (Manitowoc Ice, QF0400 installation, use and care manual, part number 000007651, May 2010).

A cleaning contract in FieldRanger is a recurring job template for each machine, on its six-month cycle. The job's checklist follows the manual: bin emptied, approved cleaner and sanitizer used and never mixed, ice from the cycle discarded, condenser and air filter cleaned, water filter cartridge replaced. The cleaning solution, the sanitizer and the filter cartridges are checked out of the warehouse against the job, and low-stock warnings flag a short shelf before a week of cleanings. Before and after photos of the evaporator and the bin attach to the work order and sync to the customer's HubSpot record, which answers a health inspector's or a manager's question about when the machine was last cleaned.

A walk-in freezer no-cool call from phone to paid invoice

  1. A restaurant manager calls at 9 p.m.: the walk-in freezer reads warm. The office logs the call on the restaurant's HubSpot company and opens the emergency job.
  2. The dispatcher filters for a Type II technician on call, drags the job onto that technician's evening, and the technician receives a push notification. Methods shared across trades for same-night calls are covered on dispatch software.
  3. On arrival, the technician clocks in with the location recorded, photographs the condensing unit's data plate and records the box temperature on the checklist.
  4. The technician finds an iced evaporator and a leak at a flare fitting, repairs it, and records the pounds of refrigerant added. A replacement fan motor comes out of the shop warehouse against the job.
  5. The manager signs on the phone. The completed work order generates the invoice, Stripe takes the card or the invoice goes to the chain's office, and QuickBooks receives the invoice and the payment.
  6. This unit's full charge is above 15 pounds of an HFC, so the record of pounds added goes to the owner, and the follow-up verification test is booked as a new job inside the repair window.

Chain accounts and service agreements in HubSpot

A grocery or restaurant chain is one customer with many stores. HubSpot models that as a parent company with child companies: a parent can have several children, and "a child company can only be associated with one parent company", on all products and plans (HubSpot Knowledge Base, parent and child companies, updated January 21, 2026). Each store is a child company with its own address and contacts, so the technician's job opens on the store, and the parent company groups every store the chain owns.

FieldRanger syncs those contacts and companies with HubSpot in both directions, logs job completions and notes to the HubSpot timeline, and shows job status on the deal. Revenue reports give job revenue and margin by customer, so the cost of keeping one chain's cases cold is visible store by store. Preventive maintenance agreements run as recurring job templates: coil cleaning on the condensing units, door gaskets on the reach-ins, ice machine cleanings every six months. Each visit is invoiced from its own completed work order, and the agreement's recurring visits can be charged automatically to the chain's card on file. The records each job writes back to HubSpot are set out under HubSpot field service.

The same kitchens hold equipment that has no refrigerant circuit: fryers, ovens, ranges and dish machines. That service is covered under commercial kitchen equipment software.

Refrigerant management software compared with FieldRanger

Refrigerant compliance has its own category of software. Fexa describes Trakref as "cloud based refrigerant management software" that keeps track of "leak rates, inspection deadlines, repairs and other critical data points", with one-click reports for "regulatory bodies like the EPA and CARB" and a mobile app for asset tracking, work orders and offline data entry. Fexa presents it as the leading and audit-ready product in its category. The page names no HubSpot integration and shows no prices (Fexa, Trakref, checked November 2026).

A supermarket chain, or a contractor managing refrigerant for one, that must calculate leak rates across hundreds of appliances and file EPA and CARB reports is better served by a refrigerant management product of that kind. The same holds for a contractor whose customers require each appliance's charge history in their own compliance system. FieldRanger fits the refrigeration contractor that sells through HubSpot, dispatches by certification, and needs each repair's pounds, photos and invoice on the customer's record.

Refrigeration business guides

Naming a new refrigeration company, from state registration to trademark searches, is covered in refrigeration company names.

Frequently asked questions

What is commercial refrigeration software?

Software that schedules, dispatches and records service on walk-ins, reach-ins, display cases, rack systems and ice machines, from the call to the invoice. FieldRanger does this inside HubSpot, with each repair's refrigerant, parts and photos on the customer's record.

What is field service management software for refrigeration?

The dispatch, work order and invoicing system a refrigeration contractor runs its technicians on. FieldRanger matches each call to a technician holding the right Section 608 type, routes the day, and turns the completed work order into the invoice.

Which EPA certification does a walk-in cooler technician need?

Under 40 CFR 82.161, Type I covers small appliances sealed at the factory with 5 pounds or less, such as reach-ins and undercounter ice makers. A walk-in condensing unit is a medium- or high-pressure appliance, which requires Type II or Universal.

What is the leak repair threshold for commercial refrigeration?

A 20 percent leak rate. Under Section 608 it applies to appliances with 50 pounds or more of an ozone-depleting refrigerant; under the AIM Act rule, from January 1, 2026, to appliances with 15 pounds or more of an HFC. Repairs are due within 30 days.

What is the cleaning interval for a commercial ice machine?

On the manufacturer's schedule. Manitowoc's QF0400 manual requires the full cleaning and sanitizing procedure at least once every six months, and calls for a water test when a machine needs cleaning sooner than that.

Does FieldRanger calculate refrigerant leak rates?

FieldRanger records the pounds added, the leak location and the repair on each work order, and books the follow-up verification job. The leak-rate calculation and EPA reporting run in the owner's compliance system.

How much does commercial refrigeration software cost?

FieldRanger charges per technician; pricing lists the plans, and the trial is 14 days without a card.

A walk-in that took six pounds of refrigerant on Tuesday needs a leak rate calculated from that addition, and a rate above 20 percent starts a 30-day repair clock from that night. FieldRanger keeps the pounds, the photos and the follow-up job on the store's HubSpot record, so the owner's answer starts from the technician's entry. Plans are per technician on pricing, and Start free trial gives 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo