Industry
Roofing Estimating Software:Roofing Estimates in FieldRanger and HubSpot
Roofing estimating software on HubSpot: price reroofs, repairs and insurance scopes on the deal or in FieldRanger, then turn the signed deal into the job.
Roofing estimating software prices a roof before the owner signs: a reroof, a repair, an insurance restoration scope or a commercial membrane bid. FieldRanger builds the estimate from the HubSpot deal or contact record, or in FieldRanger tied to that deal, and turns the signed deal into the job.
Estimating sits between the inspection and the crew in roofing contractor software. Its inputs come from several places. Measurements come from a report or a tape, the layer count and decking condition from the inspection, and the code items from the local building department; on a claim, the insurer's scope is a fourth input. FieldRanger holds the estimate on the HubSpot deal and carries it into the job; it does not produce the measurements.
Line items on a residential reroof estimate
A roofing square is 100 square feet of roof area, and three bundles of the most popular shingles cover one square (IKO, how many shingles in a bundle, July 19, 2023). The lines on a reroof estimate follow from three inputs: the squares, the lengths of the roof's edges and lines, and what the inspection found.
| Line | Unit | Measurement that drives it |
|---|---|---|
| Tear-off | Square, per layer removed | Roof area; layer count from the inspection |
| Shingles | Square, bought in bundles | Roof area plus waste for hips, valleys and cuts |
| Starter strip | Linear foot | Eaves and rakes |
| Hip and ridge cap | Linear foot | Hips and ridges |
| Underlayment | Square | Roof area, less any area under ice barrier |
| Ice barrier | Square | Eave length times the width the code requires |
| Drip edge | Linear foot | Roof perimeter |
| Flashing | Linear foot or each | Walls, chimneys, skylights and pipe penetrations |
| Ventilation | Linear foot of ridge vent, or each | Attic floor area and the net free area rule |
| Decking | Sheet | Rotten or delaminated sheets found at tear-off |
| Disposal and permit | Load; fee | Tear-off weight; local fee schedule |
Roofing and siding estimating software applies the same method to walls. Siding is bought by the square of wall area less openings, with trim, corners and starter by the linear foot.
Code items that change a reroof price
Four code provisions decide whole lines on a residential estimate. A re-roofing guide to the 2024 International Residential Code, published by SAFEbuilt and posted by the Town of Severance, Colorado, sets out three of them (2024 IRC residential re-roofing guide, January 1, 2026).
Section R908.3 requires a tear-off in three cases. The roof is water-soaked or deteriorated; the covering is wood shake, slate, clay, cement or asbestos-cement tile; or the roof "has two or more applications of any type of roof covering". The layer count from the inspection therefore decides between a tear-off line and a recover.
Drip edge "is required around the entire perimeter of roof" under the guide, so its line is the perimeter in linear feet.
Ventilation under Section R806.2 requires a net free ventilating area of at least 1/150 of the attic area. The ratio drops to 1/300 when 40 to 50 percent of the vent area sits in the upper part of the space and the rest at the eaves. An attic floor of 1,500 square feet therefore needs 10 square feet of net free area at 1/150, or 5 square feet at 1/300.
The fourth is the ice barrier, required where ice has a history of forming along the eaves. The barrier runs "from the lowest edges of all roof surfaces to a point at least 24 inches (610 mm) inside the exterior wall line of the building" (Town of Horseheads, New York, residential roof ice and water code compliance, checked November 2026). The ice barrier quantity therefore grows with the overhang: the membrane covers the overhang plus 24 inches past the wall line.
Insurance restoration estimates and supplements
A storm claim has two estimates: the insurer's scope and the contractor's. The scope is written in claims estimating software, and Verisk sells Xactimate as "property claims estimating software" (Verisk, Xactimate, checked November 2026). The contractor compares its own estimate with the scope line by line. A supplement then asks for items the scope missed, such as drip edge, ice barrier, starter or decking found rotten at tear-off.
A supplement is argued with evidence. Photos taken on the inspection and at tear-off attach to the work order and sync to the customer's HubSpot record. The decking photos therefore sit on the same record as the deal the supplement belongs to. State law limits the contractor's role in the claim itself. The Texas Department of Insurance states that Texas law "prohibits a roofing contractor from acting as an adjuster or advertising to adjust claims" for property where it provides or may provide roofing services (TDI Commissioner's Bulletin B-0014-14, May 23, 2014, page updated July 15, 2025).
The scope stays in the claims system, and the contractor's estimate and photos stay in HubSpot.
Shingle lines, options and the roofing proposal
Roofing proposal software presents the price as choices. A homeowner may see the same roof priced in a standard architectural shingle, a heavier designer line and standing seam metal, each with its own warranty terms. The proposal also carries the contract terms: what happens when rotten decking is found, how the yard and the driveway are protected, and when payment is due.
FieldRanger builds the estimate on the deal, and PandaDoc sends the estimate and the agreement for signature. Lines come from a price book of services, parts and rates, and the estimate writes the HubSpot deal's line items and amount.
Commercial roofing estimating software and low-slope bids
Commercial roofing estimating software works on low-slope assemblies: TPO, EPDM, PVC, modified bitumen and built-up roofs. The estimate stacks the assembly from the deck up, with insulation boards, cover board, membrane by the square and flashing at every curb, drain and parapet. Tapered insulation adds a layout of its own to move water to the drains. New construction and large replacements are bid from drawings, and estimating software for commercial roofing takes the quantities off the plans.
FieldRanger does not take off quantities from drawings. It fits the commercial service side: a repair quote for a property manager who is already a HubSpot contact, or an inspection program for a portfolio of buildings, which recurring job templates hold as scheduled visits.
Zuper as the roofing-first estimating option
Zuper builds its roofing quoting around measurement data. Its Intelligent Quoting page lists "measurements pulled from EagleView and Hover into the job", "preconfigured + custom formulas", "interactive tiered selections for upselling" and "e-signatures and payment collection on-site" (Zuper, Intelligent Quoting for roofing contractors, checked November 2026). Its Instant Estimates product puts a price range on the contractor's website, with "automatic roof-area detection from satellite imagery" (Zuper, Instant Estimates, checked November 2026). Zuper also offers a HubSpot integration it describes as a two-way sync (Zuper, HubSpot integration, checked November 2026).
A roofer who wants measurement imports, formula-driven line items and tiered proposals in one roofing platform is better served by Zuper. FieldRanger fits the roofer whose sales run in HubSpot and who wants the estimate, the job and the photos on the HubSpot records themselves rather than in a second system kept in sync.
From signed roofing estimate to technician calendar
- The inspector photographs the roof and the attic, and the photos attach to the inspection's work order and sync to the HubSpot contact.
- The estimator enters the measured squares and lengths on an estimate built from the HubSpot deal, or in FieldRanger, where it stays tied to the deal.
- The estimate and the contract go to the homeowner for signature through PandaDoc. Marking the signed deal won creates the FieldRanger job, with the deal's context carried over.
- Shingles, underlayment, drip edge and vents are checked out of a specific warehouse and logged against the job for job costing.
- The dispatcher drags the tear-off and install onto the calendar for the roofing crew, each day as its own job; the mobile app for roofing crew scheduling page covers weather days and schedule alerts.
- After the install, revenue reports show the job's revenue and margin by customer or service type, beside the estimate that priced it.
Gaps in FieldRanger roofing estimating
- FieldRanger does not measure roofs or import aerial measurement reports. Squares and lengths come from the report or the tape.
- No commercial takeoff from drawings.
- Multi-day jobs are not built; tear-off and install days are separate jobs.
Frequently asked questions
What is roofing estimating software?
Software that prices roofing work before the owner signs it, from a repair quote to a full reroof or a commercial membrane bid. In FieldRanger, the estimate is built from the HubSpot deal or contact record or in FieldRanger, and the signed deal becomes the job.
How is a roof estimated in squares?
Divide the measured roof area in square feet by 100 to get squares, then add waste for hips, valleys and cuts. Shingles are ordered by the bundle, at the bundles-per-square figure the manufacturer gives for the shingle line.
Is there a roof estimate app for inspections?
FieldRanger's mobile app records the inspection: photos and video taken in the app attach to the work order and sync to the HubSpot record. The estimate itself is built from the HubSpot deal or in FieldRanger.
Can roofing estimates be built in HubSpot?
Yes. A roofing estimate can be built on the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger, linked to the deal.
What is the difference between a roofing estimate and an insurance scope?
The scope is the insurer's estimate of what the policy pays, written in claims estimating software such as Xactimate. The contractor's estimate prices the work it will do, and a supplement asks the insurer to add items the scope missed.
What software do commercial roofing estimators use?
Takeoff and estimating software that measures membrane, insulation and flashing from drawings. FieldRanger covers commercial repair quotes and inspection programs rather than plan-based bids.
Is there free roofing estimating software?
Free templates and calculators cover single steps, such as the roofing estimate template and the roof area calculator. FieldRanger can be tried free for 14 days without a card.
A roofing estimate in FieldRanger is written on the same HubSpot deal as the inspection photos and the supplement evidence, and it becomes the tear-off and install job without being retyped. The whole trade is under roofing contractor software, and pricing shows the per-technician plans, with a 14-day trial behind Start free trial and no card asked.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo