Industry
Septic Business Software:FieldRanger for Septic Services on HubSpot
Septic business software on HubSpot: FieldRanger runs pump-outs, inspections, installs and repairs, with tank readings, county reports and invoices.
Septic business software runs a septic company's four lines of work from the first call to the paid invoice: pumping, inspection, installation and repair. FieldRanger does this inside HubSpot. Each tank's size, location and sludge readings sit on the owner's record, and each pump-out sets up the next visit, the county report and the bill.
Septic service sits among the trades in field service software by industry, and the record that matters is the tank's history across visits. One tank is pumped, inspected, repaired and eventually replaced over decades, under one owner or several. Septic company software is judged on whether each visit finds the readings from the last one. Starting the company, from state licenses to disposal fees, is covered in how to start a septic tank business; this page covers running the work once the trucks are on the road.
Septic job types: pumping, inspection, installation and repair
Each line of septic work starts from a different trigger and leaves a different record. Pumping recurs on the tank's own cycle. Inspection follows a property sale, a county rule or a complaint. Installation and major repair run under a permit, with inspections the installer has to request.
| Job type | What starts it | Record on the work order |
|---|---|---|
| Pump-out | The tank's pumping cycle, or a backup | Gallons removed, sludge and scum depths, baffle and filter condition, lid photos |
| Inspection | A property sale, a county rule or a complaint | Inspection checklist, findings, photos of the tank and the drain field |
| Repair | An inspection finding or a failure | Parts used, before and after photos, the owner's signature |
| Installation | A permit for a new or replacement system | Crew hours, materials, equipment used, photos taken before the system is covered |
Each type is its own job in FieldRanger with its own custom checklist. A pump-out and a real estate inspection at the same house therefore sit side by side on one HubSpot contact, each with its own findings. Septic business management software also has to show which line earns its keep: revenue reports give job revenue and margin by service type, which separates the pumping trucks from the inspection and install crews.
Sludge and scum readings on the pump-out checklist
EPA gives the measurements that decide when a tank is due. A tank should be pumped when "the bottom of the scum layer is within six inches of the bottom of the outlet", when "the top of the sludge layer is within 12 inches of the outlet", or when "more than 25 percent of the liquid depth is sludge and scum" (EPA, septic system care, last updated August 17, 2026). The same page asks owners to write down the levels the septic professional finds and to keep the maintenance records.
Septic pumping software turns those readings into fields on the driver's checklist. In FieldRanger the pump-out checklist records the tank's capacity in gallons, the number of compartments, the sludge and scum depths before pumping, the gallons removed, the baffle condition and whether the effluent filter was cleaned. The lid's position and its depth below grade go in the customer notes, visible to every driver, so the next crew digs in one place. Before and after photos of the open lids attach to the work order and sync to the owner's HubSpot record.
The readings also set the next visit. A tank that filled faster than its cycle assumed gets a shorter one, and recurring job templates hold the interval for each address. EPA adds that systems with "electrical float switches, pumps, or mechanical components" need inspection "generally once a year", so those addresses carry an annual template of their own.
County pump-out reports in Snohomish County and Virginia
Some health authorities require the pumper to file every visit. The Snohomish County Health Department in Washington requires, under the county Board of Health Code, that service reports be uploaded to its OnlineRME system "within 30 days from the date of service". Where a failure or an immediate health or safety hazard is found, the report is due "within 24 hours or the end of next business day (whichever is later)" (Snohomish County Health Department, OnlineRME reporting, checked November 12, 2026).
Virginia added a state reporting system for part of the state. The Virginia Department of Health's Three Rivers district states that 2022 legislation, HB 769, requires maintenance providers in its districts to report pump-outs through "a web-based reporting system developed by VDH", the MyHD portal. The same page states that the Chesapeake Bay Preservation Act "requires all onsite sewage systems be inspected/pumped out at least once every five years" (VDH Three Rivers Health District, septic pump-out information, last updated October 19, 2026).
FieldRanger has no connection to OnlineRME, MyHD or any other county portal. What it holds is the content of each report: the date of service, the readings, the photos and the name of the certified technician, all on the completed work order. The office files the report from that record, and a checklist item marks it filed. A job status change can also trigger a HubSpot workflow, such as a task for the office to file the report once the job is complete. Such workflows do not need the Professional tier: HubSpot lists 50 on Sales Hub Starter, whose triggers and actions are restricted, against 300 on Professional (HubSpot, Sales Hub pricing, checked November 2026). Virginia's five-year cycle fits a recurring job template, created once per address.
A pump-out from phone call to county report
- A homeowner calls about a slow drain. The office logs the call on the HubSpot contact, opens a deal for the pump-out and marks it won once the price is accepted; FieldRanger creates the job with the deal's context carried over.
- The dispatcher drags the job onto a driver's calendar inside an arrival window, and skill-based assignment limits the choice to drivers who hold the state pumping license. Truck boards and pump-out routes are covered on septic dispatching software, and methods shared across trades on dispatch software.
- FieldRanger builds the driver's route for the day automatically, and the homeowner receives the arrival window by SMS through Twilio.
- Before leaving the yard, the driver completes the truck's pre-trip inspection checklist and checks a replacement effluent filter out of the shop warehouse against the job.
- On site, the driver clocks in with the location recorded, measures sludge and scum, pumps the tank and photographs the open lids and baffles.
- The homeowner signs on the phone, the completed work order generates the invoice, and the driver takes the card through Stripe before leaving the property; QuickBooks receives the invoice and the payment.
- At the treatment plant, the driver photographs the disposal receipt and attaches it to the work order.
- The office files the county report from the work order, and the completion, readings and photos are logged to the HubSpot timeline.
Installation and repair under a Texas OSSF permit
A septic system installation business runs on the permit's sequence. Texas rules for on-site sewage facilities (OSSFs) require the installer to "notify the permitting authority of the date on which the installer plans to begin the construction of an OSSF" and to "request the initial, final, and any other required inspection or inspections from the permitting authority" (30 TAC §285.61, amended effective September 11, 2008). The installer gives the permitting authority "at least five working days" notice before the system is ready for inspection, and the authority issues a written notice of approval within seven calendar days after the system passes (30 TAC §285.3, amended effective July 6, 2023).
Those rules turn one installation into several dated jobs for the same customer: excavation and tank setting, the construction inspection, and backfill after approval. The dispatcher dates the inspection job at least five working days after the notice is sent. The mini excavator and the tank trailer are booked on the equipment availability calendar and checked out by QR code at the yard. Tanks, pipe and chambers are logged as materials against the job, and photos of the open system before cover attach to the work order. Pricing an install or a drain field repair is covered under septic business estimating software.
Aerobic treatment systems bring a contract after the install. Under the same section, the affidavit for a single-family aerobic system states that, after "the initial two-year service policy", the owner obtains a maintenance contract or maintains the system personally. Business software for septic contractors who sell those contracts holds the visits as recurring job templates, and autopay charges the contract's fee automatically to the owner's card on file.
Septic customer records in HubSpot
A septic system business sells to three kinds of customer. Homeowners call, or book a visit online, when a drain slows. Real estate agents order inspections before a sale, with a closing date behind them. Property managers order pumping across rental houses. FieldRanger syncs contacts and companies with HubSpot in both directions, deals stay in HubSpot, and job photos land on the customer's HubSpot record. An inspection for a sale therefore starts from the seller's pump-out history, read in the office before the truck leaves.
Each agency and management company is a HubSpot company with its agents or managers as contacts. Revenue attribution follows revenue from lead to completed job in HubSpot reports, so agent referrals can be compared with search and repeat customers. How those HubSpot records connect to jobs is set out under HubSpot field service.
Complete business software for septic contractors would also keep the books and file the county reports. FieldRanger does neither: it syncs invoices and payments with QuickBooks, which keeps the ledger, and it leaves the portals to the office.
Septic work outside FieldRanger
- No connection to county or state reporting portals; the office files each report from the work order.
- No reading of the truck's tank level; the treatment-plant run is planned by the dispatcher.
- No weather feed; installs held for wet or frozen ground are moved by the dispatcher.
- No permit tracking with the health authority; the permit number goes in the job notes.
Septic guides, comparisons and task pages
Owners comparing products can start with best software for growing septic business. One pumping truck's daily direct cost is worked through in the guide to starting a septic pumping business. Software for septic business owners also splits by task: the truck board is covered on septic dispatching software, and installs and repairs are priced on septic business estimating software.
Frequently asked questions
What is septic business software?
Software that runs pump-outs, inspections, installations and repairs from the call to the invoice, with each tank's readings and photos on the customer record. FieldRanger keeps that record in HubSpot.
What does septic pumping software record on each pump-out?
In FieldRanger the checklist records the tank's capacity, its compartments, the sludge and scum depths, the gallons removed, the baffle and filter condition and photos of the open lids, along with the driver's located clock-in and the owner's signature.
When should a septic tank be pumped?
EPA states that household tanks are pumped every three to five years, and sets the trigger by measurement: scum within six inches of the outlet, sludge within 12 inches, or sludge and scum above 25 percent of the liquid depth.
Do septic pumpers have to report pump-outs to the county?
In some places. Snohomish County, Washington, requires reports in OnlineRME within 30 days of service, and a 2022 Virginia law requires pump-out reports through the VDH portal in the districts it covers. FieldRanger holds the report's content on the work order; the office files it.
Can septic company software schedule the next pump-out?
Yes. Recurring job templates hold each address's interval, such as a five-year cycle under Virginia's Bay Act or an annual visit for a system with pumps and float switches.
Does FieldRanger handle septic system installation jobs?
An installation runs as several jobs for one customer: excavation and tank setting, the permit inspection and backfill. Machines are booked on the equipment availability calendar, and materials and clocked hours are logged against each job.
How much does septic business software cost?
Per technician, on the plans shown on the pricing page. A FieldRanger trial runs for 14 days with no card asked for.
Gallons removed, sludge depth and the lid photo from each pump-out stay on one HubSpot record in FieldRanger, so the next pump-out, the county filing and a buyer's inspection all begin from the last reading. Trucks and routes are planned with septic dispatching software, the other trades are under field service software by industry, and pricing carries the per-technician plans and a Start free trial of 14 days that takes no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo