Industry

Siding Contractor Invoicing Software:Material Lines, Labor Lines and Change Orders in FieldRanger and HubSpot

Siding contractor invoicing software on HubSpot: FieldRanger bills siding, trim and labor from the work order, adds signed change orders and syncs QuickBooks.

Updated 7 min read

Siding contractor invoicing software turns a finished siding job into a bill: the siding and trim installed, the labor, the tear-off and disposal, and any change found at tear-off. FieldRanger generates the invoice from the completed work order and keeps it on the homeowner's HubSpot deal, beside the estimate and the signed changes.

The invoice closes the record that siding contractor software opens at the measure visit. A siding bill differs from a service bill in two respects. Its quantities were estimated before the wall was opened, so the invoice reconciles what was sold with what was installed. Its sales tax can depend on the kind of work done, and in New York that decides whether the homeowner is charged sales tax at all.

Material and labor lines on a siding invoice

Siding invoice lines, their units and their FieldRanger record
LineUnitWhere the quantity comes fromFieldRanger record
Siding panels or boardsSquaresThe estimate, checked against material taken from stockMaterials logged against each install day's job
Trim, corners, starter and J-channelLinear feet, in stock lengthsThe estimateMaterials logged against the job
House wrap and tapeRollsThe estimateMaterials logged against the job
Tear-off and disposalSquares removed, plus the dumpster or haul-awayThe measure visitA line carried from the estimate
Installation laborPer square, or by the hourThe contract, or located clock-insTime logged against each day's job
Sheathing, flashing or trim replaced under a changeSheets, linear feetThe signed changePhotos and materials on the day's job

How squares, waste and trim lengths are counted is set out on siding estimating software. The invoice inherits those quantities, and the material log tests them. Technicians check panels, trim and wrap out of a specific warehouse, so each box that leaves for a house is counted against that house's job. Labor is the other half. An installer paid by the square and one paid by the hour produce the same invoice line from different records: the contract price in one case, and in the other the assigned technician's clock-in hours logged against each job.

Material and labor are separated on the invoice for the homeowner's reading and for the contractor's job costing. In New York, as the next section shows, the separation does not change the tax on the homeowner's bill. The classification of the job does.

New York sales tax on re-siding and siding repairs

New York's Tax Department places siding on both sides of its line between capital improvements and repairs. Publication 862 lists "Application of siding to structures" and "Complete re-siding of structures" as capital improvements, and lists "siding (partial)" among repair, replacement or maintenance work. For a repair, it states that "sales tax must be collected from the customer" unless the contractor receives an exemption document. As a general rule, the contractor "must pay sales tax to its supplier when it purchases tangible personal property", whichever kind of job the material is for (NYS Department of Taxation and Finance, Publication 862, edition 4/01, checked November 2026).

The capital improvement side has its own document. When performing capital improvement work, the contractor obtains a completed Form ST-124, Certificate of Capital Improvement, from the customer, and "should not collect sales tax from the customer for the project". The tax paid on materials "becomes an expense that can be passed through to the customer as part of the overall charge". A contractor is not required to accept Form ST-124 (NYS Tax Bulletin ST-104, capital improvements, updated October 16, 2026).

Two New York siding jobs and their sales tax treatment
ItemComplete re-side of a houseStorm repair to one wall
Publication 862 classificationCapital improvementRepair, replacement or maintenance
Document from the homeownerForm ST-124None
Sales tax on the invoiceNone collected for the projectCollected from the customer
Tax on materialsPaid to the supplier and carried in the pricePaid to the supplier
FieldRanger recordOne job per install day, with the signed ST-124 in the job filesOne repair job with before and after photos

The office applies each job's treatment in QuickBooks, which receives the invoices and payments through the sync. The certificate itself is kept with the job files in Google Drive, so the signed ST-124 sits beside the photos of the house it covers. A FieldRanger field mapped to a HubSpot custom property can carry the job's classification on the deal, set when the estimate is priced. Job status changes can trigger HubSpot workflows, within the limits of the account's tier, so the first install day of a capital improvement job can create the office's task to collect the certificate.

Change orders for sheathing, flashing and trim found at tear-off

A tear-off can reveal soft sheathing, a missing head flashing over a window or trim rotted through. Each becomes a change in its own unit: sheets of sheathing, linear feet of flashing, pieces of trim. The record chain in FieldRanger runs from the wall to the bill.

  1. The crew lead photographs the damage on the open wall, and the photos land on the work order and on the homeowner's HubSpot record.
  2. The estimator prices the change as an estimate on the HubSpot deal, or in FieldRanger tied to the deal.
  3. PandaDoc sends the change for signature, and the signed change sits on the same deal as the contract.
  4. The replacement sheets and flashing are checked out of the warehouse and logged against that day's job.
  5. Before the invoice goes out, the office compares it with the signed change.

The last step catches the change installed without a signature, which shows up as materials logged on a job with no matching price on the deal.

Install days, deposits and the final bill

A re-side runs over several days, and FieldRanger has no multi-day jobs: each day is its own job with its own work order, and the invoice is generated from the completed work order.

A deposit taken at signing goes out as a deposit invoice before the first install day, and the balance is invoiced on completion. Progress billing is not built: FieldRanger does not bill a share of the contract as each elevation is finished, and it holds no retainage.

Payment, job costing and the HubSpot record

At the final walkthrough, the homeowner signs on the crew lead's phone and the after photos attach to the work order. Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Completion and notes are logged to the HubSpot timeline, and job status shows on the deal, so a sales rep calling about gutters next spring sees the paid siding job first.

Materials tracking logs what each day's job used, and revenue reports show job revenue and margin by service type. A vinyl re-side, a fiber cement re-side and a storm repair can be compared on margin. A job whose logged materials ran past the estimate with no signed change shows that loss in the report before the next estimate repeats it. The sync between the two systems is described under HubSpot field service.

Siding invoice functions FieldRanger leaves to other systems

  • Progress billing and retainage are not built.
  • Tax treatment is applied in the accounting system, and exemption certificates are kept in the job files.
  • No multi-day jobs: a four-day re-side is four jobs.

Frequently asked questions

What is siding contractor invoicing software?

Software that bills a completed siding job: siding and trim installed, labor, tear-off and disposal, and signed changes. FieldRanger generates the invoice from the completed work order and keeps it on the homeowner's HubSpot deal with the estimate and photos.

Should a siding invoice separate materials and labor?

Separate lines let the homeowner read the bill and let the contractor cost the job. In New York the split does not change the sales tax: whether the job is a capital improvement or a repair does.

Is siding installation taxable in New York?

Publication 862 classifies complete re-siding as a capital improvement: with a signed Form ST-124, the contractor collects no sales tax and pays tax on materials to the supplier. Partial siding work is a repair, and sales tax is collected from the customer.

How are siding change orders billed?

In FieldRanger, the change is photographed on the open wall, priced as an estimate on the HubSpot deal and signed through PandaDoc. Its materials are logged on the day's job, and the office checks the invoice against the signed change.

Can siding invoicing software take a deposit or bill progress payments?

FieldRanger sends a deposit invoice before the job and invoices the balance on completion. It has no progress billing or retainage. Payment for completed work is taken through Stripe and synced with QuickBooks.

Does siding contractor invoicing software work with QuickBooks and HubSpot?

FieldRanger syncs invoices and payments with QuickBooks and logs each completed job, its notes and its photos to the homeowner's HubSpot record.

Two siding invoices on one New York street can look alike and be taxed differently: the full re-side carries no sales tax under a signed ST-124, and the one-wall storm repair carries it. FieldRanger keeps the certificate, the photos and the signed changes on the deal each invoice came from. The quantities behind both bills are counted on siding estimating software, the trade is covered on siding contractor software, and pricing lists per-technician plans with a 14-day Start free trial that takes no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo