Industry

Waste Management Fleet Software:Roll-Off and Collection Trucks in FieldRanger and HubSpot

Waste management fleet software on HubSpot: FieldRanger maps every roll-off and collection truck, puts hoist pre-trips on the phone and schedules truck service.

Updated 7 min read

Waste management fleet software keeps the records of a hauler's trucks: where each one is, who drives it, what the pre-trip found and when the hoist is due for service. FieldRanger keeps those records beside the jobs in HubSpot, with every truck on a live map and every drop, swap and pull tied to a customer.

A roll-off hauler runs two fleets. One is containers, which sit at customers' addresses for days or weeks; container tracking by QR scan and availability calendar is covered on the waste management software page. The other is trucks, which this page covers: the hook-lift and cable-hoist roll-offs, the front-loaders on commercial routes and the vacuum trucks on pump-outs. Roll off fleet software has to know both, because a swap needs a free truck, a qualified driver and an empty container at the same hour.

37.4

fatal work injuries per 100,000 full-time refuse and recyclable material collectors, 2024Source: BLS Census of Fatal Occupational Injuries, checked November 2026

The Bureau of Labor Statistics counted 36 fatal work injuries among refuse and recyclable material collectors in 2024, a rate of 37.4 per 100,000 full-time equivalent workers against 3.3 for all workers (BLS, rate and number of fatal work injuries in selected occupations, checked November 2026). The figure frames the fleet records that follow. Inspections, speed alerts and maintenance histories are safety records first, and cost records second.

Hauler trucks and the record each one needs

Waste collection trucks and what FieldRanger records for each
TruckWorkWhat the inspection and maintenance record covers
Roll-off, hook-lift or cable hoistDrops, swaps and pulls of open-top containersHoist cylinders, hook or cable, rails, tarp system, container locks
Front-loadCommercial containers emptied on a set frequencyForks, arms, packer blade, hydraulic lines
Rear-loadBags, carts and small containersPacker blade, hopper, riding steps, back-up camera or spotter
Automated side-loadCarts emptied by an armArm, gripper, hydraulic lines
Vacuum truckSeptic, grease trap and portable toilet pump-outsPump, hoses, tank, valves

The equipment itself is built to a consensus standard. ANSI Z245.1 sets safety requirements for mobile waste and recyclable materials collection, transportation and compaction equipment, ANSI Z245.30 covers waste containers, and ANSI Z245.60 sets the container compatibility dimensions that let a truck lift and dump a container (National Waste & Recycling Association, ANSI Z245 standards, checked November 2026).

In FieldRanger, each truck is a vehicle record with its assigned driver, its live GPS position, its odometer log, its inspections and its maintenance history. Vehicle assignment shows which trucks are free, so a hauler with a hook-lift and a cable-hoist truck can see which of the two is open before placing a swap at a site where only one of them fits.

Pre-trip inspections on hoists, cables and packers

The daily inspection on a roll-off truck covers the body as well as the chassis. For commercial motor vehicles, the federal rule requires each driver to prepare a written report at the completion of each day's work, covering at least the service brakes, parking brake, steering, lighting, tires, horn, wipers, mirrors, coupling devices, wheels and rims, and emergency equipment. No report is required if no defect is found, and reports are kept for three months (49 CFR 396.11, checked November 2026).

FieldRanger's digital pre-trip and post-trip inspection checklists put that list on the driver's phone, with the hauler's own lines added for the body: hoist cylinders for leaks, cable fraying or hook wear, tarp arm and tarp, rail rollers, container locks. The office schedules the repair for any defect recorded at 5 a.m. Maintenance scheduling sends reminders for oil changes, inspections and repairs, and each completed service joins the truck's maintenance history, so the shop can see whether a hoist that leaked in March is leaking again in June.

Driver hours, licenses and the short-haul rule

Collection drivers on local routes can fall under the federal short-haul exception. A driver who works within a 150 air-mile radius of the normal work reporting location, and is released within 14 consecutive hours, is exempt from the logbook rules. The motor carrier must keep time records for 6 months showing when the driver reported for duty, the total hours on duty and when the driver was released each day (49 CFR 395.1(e)(1), checked November 2026).

FieldRanger's clock-ins and clock-outs record the start and end of each driver's day and where the driver was at each, and time is logged against each job. Each carrier checks that record against the short-haul requirement. Drivers who go beyond the radius or the 14 hours need the logging the rule otherwise requires.

The license matters as much as the hours. Skill-based assignment matches jobs to drivers by certification, so a heavy roll-off goes only to a driver licensed for it, and a vacuum truck only to a driver trained on the pump.

Live map, fleet alerts and the landfill queue

Vehicle tracking shows every truck's real-time GPS position on a live map. A dispatcher with a same-day pull request sees which truck is nearest and which is in the landfill line. The pull goes onto that driver's route, and dynamic rerouting adjusts the stops behind it. Job-to-job travel time and mileage estimates appear when the day is planned, and route history shows how each truck's day actually ran.

Alerts fire on speeding, on geofence exits and on idle time. A geofence around the yard catches a truck that leaves after hours. Idle time shows where trucks wait: at a transfer station scale, at a job site with no access, or at a customer who has not moved the car blocking the container. Speeding alerts reach the dispatcher while the truck is still on the street, not in next month's review.

Fuel, utilization and truck replacement

Fuel monitoring tracks fuel use by truck, and utilization reports show usage rates, so a spare truck that sat idle for weeks shows up before the next truck is bought. Read together, the two separate a truck that burns more fuel because it runs the longest landfill haul from a truck that burns more because something is wrong with it. Odometer logging records each truck's miles for the mileage record.

Containers have their own economics. Each container is an equipment record with maintenance and depreciation tracking, so a cracked rail or a rusted floor is scheduled for repair between rentals and the container's value is followed toward replacement. The rental, overage and extra-day charges that pay for both fleets are covered on the waste management billing software page.

A roll-off truck's day in FieldRanger

  1. The driver clocks in at the yard, and the clock-in records the location. The truck assigned to that driver shows on the vehicle record.
  2. The driver works the pre-trip checklist on the phone. A frayed cable is recorded as a defect, and the office reassigns the driver to the second truck while the first goes to the shop.
  3. FieldRanger has already built the day's route of drops, swaps and pulls. The driver taps to navigate to the first stop.
  4. At each drop, a QR scan checks the container out to the job and a placement photo attaches to the work order. At each pull, a load photo records the contents before the tarp goes on.
  5. A contractor calls for a same-day swap. The dispatcher drags the job onto the driver's route, and the route adjusts around it.
  6. At the landfill, the scale ticket photo attaches to the pull's work order.
  7. The driver completes the post-trip checklist, logs the odometer and clocks out. Completed jobs show on each HubSpot deal, and completions are logged to the customer's timeline.

Telematics and hauler systems beyond FieldRanger

  • Electronic logging devices for drivers outside the short-haul exception, engine fault codes, dashcams and side cameras belong to telematics providers.
  • Residential curbside routing by cart, with truck capacity and tonnage per route, belongs to hauler route systems; FieldRanger routes jobs, not carts.
  • Fuel tax reporting across jurisdictions belongs to fuel card and telematics providers.

Frequently asked questions

What is waste management fleet software?

Software that keeps the records of a hauler's trucks: GPS location, driver assignment, daily inspections, maintenance, fuel and utilization. FieldRanger keeps them beside the drops, swaps, pulls and pump-outs each truck serves, with the jobs tied to HubSpot customers.

What is roll off fleet software?

Software that manages a roll-off company's trucks and containers together, so a swap can be matched to a free truck, a qualified driver and an empty container. In FieldRanger, trucks are vehicle records on a live map and containers are equipment records checked in and out by QR code.

Do garbage trucks need a daily inspection report?

The federal rule requires the driver of a commercial motor vehicle to prepare a written inspection report at the end of each day's work when a defect is found; whether a truck is covered depends on its weight rating and its use. FieldRanger puts pre-trip and post-trip checklists on the driver's phone, with lines for the hoist and body added by the hauler.

Do waste haulers need ELDs?

Drivers under the short-haul exception, within 150 air miles and released within 14 hours, are exempt from the logbook rules if the carrier keeps time records for 6 months. Drivers outside it need logging. FieldRanger records clock-in and clock-out times with location, and the carrier checks that record against the rule.

Can waste management fleet software track garbage trucks by GPS?

FieldRanger shows every truck's real-time GPS position on a live map, keeps route history and alerts on speeding, geofence exits and idle time.

Does waste management fleet software work with HubSpot?

FieldRanger runs inside HubSpot. Each job a truck serves belongs to a HubSpot customer, the job status shows on the deal, and completions are logged to the timeline.

A hauler's truck records and its customer records meet at the job in FieldRanger: the pre-trip, the drop photo and the scale ticket sit under the same HubSpot account that ordered the container. Container tracking and the rest of the trade are on waste management software, rental billing on waste management billing software, and plans per driver on pricing; a 14-day trial through Start free trial asks for no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo