Template

Inventory Checkout Form Template:Warehouse, Bin, Job and Signature Fields, Return Lines, Nebraska Use Tax at the Place of Withdrawal and a Filled Lincoln and Seward Plumbing Checkout

Inventory checkout form template with warehouse, bin, job, item, return and signature fields, and Nebraska use tax on withdrawals, filled for a plumbing firm.

Updated 10 min read

Download .xlsxExcel spreadsheet · 15 KB · Free, no sign-upFill it in online

An inventory checkout form template records stock leaving a warehouse for a job: a form number, the warehouse and bin, the technician and job, each item with quantity and cost, what came back unused, and the signatures of the person issuing and the person taking. The filled forms come from a plumbing contractor's warehouses in Lincoln and Seward, Nebraska.

The form sits with the free field service templates from FieldRanger, field service software built to run inside HubSpot. The page offers the tables below as a free .xlsx download with no sign-up. A checkout form records one handover between a warehouse and a technician. A stock sheet totals many of them, and the form is the evidence behind each line of that total.

Inventory checkout form fields: header, item lines, returns and sign-off

The warehouse fills the header and the out columns when the stock leaves. The return columns stay open until the technician brings back what the job did not use.

Inventory checkout form template fields and what goes in each
SectionFieldWhat goes in it
HeaderForm numberOne sequence per company, printed on the form before use
HeaderDate and time outWhen the stock left the shelf
HeaderWarehouseThe location code of the warehouse the stock leaves, never "main" when there are two
HeaderIssued byThe warehouse person who pulled the stock
HeaderTaken byThe technician who signs for it
HeaderJob number and siteThe job the stock is for, and its address
Item lineSKU and descriptionThe stock number and a description a second person could pick from
Item lineBinWhere on the shelf it came from
Item lineUnit and quantity outEach, pair, foot or case, and how many
Item lineUnit cost and extended costCost from the stock record, times the quantity
Item lineClassBuilding material or fixture, or supply; tools go on an equipment log instead
Item lineTax statusTax-paid inventory, or tax-free inventory that owes use tax when withdrawn
ReturnQuantity returned and conditionWhat came back unused, and whether it can go back on the shelf
ReturnDate returned and received byWhen it came back, and who put it away
TotalsNet usedQuantity out minus quantity returned, by line
TotalsUse tax dueNet cost of tax-free building materials and fixtures times the rate where the warehouse sits
Sign-offSignaturesIssued by, taken by, and received by on the return

The class column separates stock that becomes part of the customer's building from stock the job consumes. A water heater stays at the address. Sand cloth used to clean copper does not, and the two are taxed differently in the state of the sample.

Tools are a third kind. A pipe threader or a sewer camera comes back after the job as the same item, so its movement belongs on an equipment tracking spreadsheet by serial number, not on an inventory form by quantity.

Nebraska contractor options and the use tax column

Nebraska makes the warehouse a tax location. The Department of Revenue's contractor guide sets three options for how a contractor pays tax on building materials and fixtures, and one of them charges tax at the moment of checkout (Nebraska Department of Revenue, Nebraska Taxation of Contractors General Information Guide, 6-346-1994 Rev. 9-2007, updated June 22, 2011, read November 13, 2026).

Nebraska contractor options and the checkout form columns they affect (Department of Revenue guide, read November 13, 2026)
OptionBuilding materials and fixturesLaborCheckout form effect
Option 1Retailer: buys tax-free and collects sales tax on the amount billed for materialsSeparately stated labor is not taxableTax status tax-free; tax is collected on the invoice instead, except parts used on warranty or service agreement repairs, which owe use tax
Option 2Pays sales tax on purchases; remits consumer's use tax where no tax was paidNot taxableTax status tax-paid; no use tax column
Option 3Buys tax-free on Form 13, Section C, Block 1; remits use tax on materials and fixtures withdrawn from inventoryNot taxableTax status tax-free; use tax due on each withdrawal

For an Option 3 contractor, the guide states that the use tax "is computed at the rate in effect at the time and place of withdrawal from inventory." The checkout form already holds both facts: the date and time out, and the warehouse code. A contractor that does not register and elect an option "will be treated as a retailer under Option 1", the same guide says.

Supplies follow a separate rule. Contractors are "the consumers of all tools, equipment, and supplies" and pay sales tax when they buy them; the guide names sandpaper and caution tape among them. Supply lines on the form therefore carry tax status tax-paid and no use tax. The guide's record keeping paragraph asks for "any other information necessary to document the taxes paid on building materials and fixtures", alongside Forms 13 and 17, contracts, permits, purchase orders and invoices; the sample company keeps each signed checkout form, with its date, warehouse and cost, as its record of one withdrawal.

The rates come from the Department's local rate table effective July 1, 2026: Lincoln at a 1.75% local rate and 7.25% total, Seward at 2.0% local and 7.5% total (Local Sales and Use Tax Rates, Effective July 1, 2026, read November 13, 2026). A withdrawal in a later quarter takes that quarter's table.

Filled inventory checkout forms: two water heater jobs from Lincoln and Seward

The contractor is an Option 3 plumbing company with a warehouse in Lincoln (LNK) and one in Seward (SEW). The company, people, SKUs, costs and jobs are samples, and so is the option election; the tax rules and rates are the Nebraska sources above.

Filled checkout form CO-2026-1188, header (sample company and entries)
FieldSample entry
Form numberCO-2026-1188
Date and time outMonday, November 16, 2026, 7:05 AM
WarehouseLNK, Lincoln
Issued byRosa Kim, warehouse lead
Taken byEli Sandoval, plumber
Job number and siteJ-4471, water heater replacement · 1220 Example Street, Lincoln, NE
Return3:40 PM the same day, received by Rosa Kim
Filled checkout form CO-2026-1188, item lines (sample SKUs and costs; Lincoln rate 7.25%)
SKU and descriptionBinClassTax statusOutReturnedNetUnit costNet costUse tax
WH-50G-NG water heater, 50 gal, natural gasA-01FixtureTax-free101$684.00$684.00$49.59
EXP-2G thermal expansion tank, 2 galA-04Building materialTax-free101$42.50$42.50$3.08
FLX-3418 gas connector, 3/4 x 18 in.C-02Building materialTax-free101$18.90$18.90$1.37
WFC-34 water heater connectors, pairC-03Building materialTax-free211$16.40$16.40$1.19
BV-34 ball valve, 3/4 in.C-05Building materialTax-free211$11.75$11.75$0.85
VP-3 vent pipe, 3 in. x 24 in.D-01Building materialTax-free202$9.80$19.60$1.42
SC-15 sand cloth, 1.5 in. rollE-02SupplyTax-paid101$6.25$6.25None
LDS-8 leak detector solution, 8 ozE-04SupplyTax-paid101$4.10$4.10None
Totals$803.50$57.50
Filled checkout form CO-2026-1189, Seward, same morning (sample entries; Seward rate 7.5%)
SKU and descriptionClassOutReturnedNet costUse tax
WH-50G-NG water heater, 50 gal, natural gasFixture10$684.00$51.30
FLX-3418 gas connector, 3/4 x 18 in.Building material10$18.90$1.42
WFC-34 water heater connectors, pairBuilding material10$16.40$1.23
Totals$719.30$53.95

Form CO-2026-1189 was issued at 7:20 AM by Dale Ortiz at SEW to Mia Hughes for job J-4475 in Seward.

The Lincoln form's use tax runs on $793.15 of tax-free building materials and fixtures: $803.50 net, less $10.35 of tax-paid supplies. At 7.25%, that is $57.50, and the line amounts add to the same figure. The Seward form's $719.30 at 7.5% is $53.95. The same heater, SKU WH-50G-NG at $684.00, owes $49.59 when it leaves Lincoln and $51.30 when it leaves Seward: the $1.71 difference is the place of withdrawal.

The returned connector pair and valve reduce the Lincoln lines from 2 to 1. The sample treats an unused return as reversing that part of the withdrawal; the guide read for this page does not address returns, so the contractor confirms the treatment with the Department.

Checkout form entries from pick to return

  1. Take the next numbered form, and write the date, time and warehouse code before picking.
  2. Write the job number and site from the work order; stock with no job number stays on the shelf.
  3. Pick each item, and write its SKU, bin, unit and quantity out.
  4. Copy the unit cost from the stock record, extend it, and mark the class and tax status.
  5. The issuer and the technician both sign before the stock leaves.
  6. When the technician returns unused stock, write the quantity, condition, date and receiver, and put good stock back in its bin.
  7. Compute net used per line and the use tax on net tax-free materials and fixtures at the warehouse's rate.
  8. Copy net used quantities to the job's parts list for billing and job costing.
  9. Confirm before filing: every line has a class, every return has a receiver, and the use tax total matches the sum of its lines.

The net used column is what the job consumed. Those quantities become parts lines on the bill built from the invoice template, and comparing them with the materials list on the estimate template shows whether the job used what it was priced for.

Warehouse inventory management software and the checkout form

A paper checkout form is correct when it is signed and wrong the moment a technician takes a second valve without writing it down. The stock count, the job's parts list and the use tax figure all inherit that gap.

FieldRanger records the same handover in the product. Technicians check parts and materials out of a specific warehouse, so stock is counted where it actually sits, and each job carries a log of the parts and materials it used, for job costing. Low-stock warnings and reorder reminders come from its inventory alerts. Any report downloads as CSV or Excel, which is how checkout lines by warehouse and date leave FieldRanger, and the job's invoice comes from its completed work order. Checkout in the product is covered on the warehouse inventory management software page.

Each technician's truck can also be its own stock location, so the fittings a plumber carries in the van are counted on that truck rather than on a warehouse shelf. A Nebraska Option 3 contractor computes the use tax from exported checkouts, by warehouse and date.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What is an inventory checkout form?

A record of stock leaving a warehouse for a job: form number, date and time, warehouse and bin, the technician and job, each item with quantity and cost, unused returns, and the signatures of the issuer, the technician and the person who received the returns.

What fields should an inventory checkout form template include?

Form number, date and time out, warehouse, issued by, taken by, job number and site, then per line the SKU, description, bin, unit, quantity out, unit and extended cost, class and tax status, followed by return quantity and condition, net used, use tax where it applies, and signatures.

Is there a free inventory checkout form template in Word, Excel or PDF?

Yes, in Excel: the page offers a free .xlsx download with no sign-up, with the header fields and item lines on a Template sheet and the filled checkout forms on a Sample sheet. Excel or Google Sheets saves it as a PDF, and the same fields fit a Word form or a numbered pad.

What is the difference between an inventory checkout form and an equipment checkout form?

Inventory leaves and is consumed or installed, so the form tracks quantity and cost. Equipment such as a pipe threader comes back as the same item, so its log tracks serial number, holder and return date.

Do Nebraska contractors owe tax on materials taken from inventory?

An Option 3 contractor buys building materials and fixtures tax-free and remits use tax on materials withdrawn from inventory, at the rate in effect at the time and place of withdrawal, per the Department of Revenue's contractor guide. Option 2 contractors pay tax when they buy, and Option 1 contractors collect tax from the customer.

How are unused parts recorded on a checkout form?

On the return columns of the original form: quantity, condition, date and the person who received them. Net used is the quantity out minus the quantity returned.

The $111.45 of use tax from Monday morning

The two forms issued by 7:20 AM on November 16 carry $57.50 of use tax at Lincoln's rate and $53.95 at Seward's, $111.45 in all, each traceable to a dated, signed withdrawal. Both totals go on the company's next Nebraska and Local Sales and Use Tax Return, Form 10, where the guide says contractors report and remit the tax. The other stock forms and spreadsheets are among the free field service templates; FieldRanger's plans are on pricing, and Start free trial gives 14 days without a card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo