Template
Pest Control Service Report Template:Target Pests, Products by EPA Registration Number, Amounts, Wind and Re-Entry Fields, with Washington's Same-Day Record Rule
Pest control service report template: target pests, products by EPA number, amount, site, wind and re-entry fields, filled for a Tacoma, Washington visit.
A pest control service report template is the record a licensed applicator completes at each stop. It names the target pests and what the inspection found, then gives each product by EPA registration number with its concentration, amount, application site, weather and re-entry statement. Devices checked, recommendations and the signatures close it. The sample below is a fall quarterly service in Tacoma, Washington.
The template is one of the free field service templates kept by FieldRanger, the pest control software that runs inside HubSpot. An estimate prices the treatment before work starts; the service report records what was applied, and in Washington it doubles as the state's application record. Licensing and route economics for the whole business are in the guide to starting a pest control business. The state's rule decides several fields below, including the license plate of the spray vehicle.
Pest control service report fields, header to signature
The table lists the template's fields, and the page offers them as a free .xlsx download with no sign-up. In Excel each application becomes one row under a header block; on paper or in a Word form the same fields fit on one page.
| Section | Field | What goes in it |
|---|---|---|
| Header | Business and report number | Business name, address, phone and pesticide license number; report number, visit date and the agreement it belongs to |
| Customer | Customer and site | Name and address of the person the application was made for, and the service address if different |
| Applicator | Licensed applicator | Full name, certified applicator license number, address and phone; the names of anyone else who applied |
| Visit | Service type | Initial, quarterly, callback or one-time |
| Inspection | Target pests and activity | Pests targeted, where activity was found, and counts from monitors |
| Inspection | Conducive conditions | Moisture, wood-to-soil contact, gaps, vegetation against the structure, each with its location |
| Application | Product | Product name as on the registered label, EPA registration number, active ingredient and percentage |
| Application | Concentration | Dilution mixed, such as fluid ounces per gallon, and the finished percentage |
| Application | Amount | Finished spray, bait or dust used, and the product it contained |
| Application | Rate and area | Square or linear feet treated, and the amount per 1,000 square feet against the label maximum |
| Application | Site and method | Where it went (foundation, eaves, kitchen cracks) and how (perimeter band, crack and crevice, spot, bait placement) |
| Application | Times and weather | Start and stop time; wind direction, wind speed in mph and temperature for outdoor sprays |
| Application | Equipment | Sprayer, and the license plate of the vehicle carrying it |
| Safety | Re-entry and precautions | The label's re-entry statement and the person told |
| Devices | Stations and monitors | Station number, location, contents, activity and condition |
| Results | Recommendations | Repairs or changes the customer is asked to make, with location |
| Sign-off | Signatures and next service | Applicator signature, customer name or the place a notice was left, and the next visit date |
Filled pest control service report: fall quarterly service in Tacoma, Washington
The visit is the November quarterly service on a 1962 single-family house in Tacoma's North End, under a year-round general pest agreement. The business, customer, license and plate numbers, measurements and weather readings are illustrative. Product names, registration numbers and label statements are quoted from EPA's label records, cited in the next sections.
| Field | Example entry |
|---|---|
| Business and report number | Example Puget Pest LLC, 1200 Example Avenue, Tacoma, WA 98405 · 253-555-0119 · WSDA license (sample number) · report PSR-2026-1183, November 10, 2026, agreement GP-0388 |
| Customer and site | J. Halvorsen, 3618 Example Street, Tacoma, WA 98407, same address |
| Licensed applicator | A. Brennan, certified applicator license (sample number), 1200 Example Avenue, Tacoma, WA 98405, 253-555-0121 · no other applicators |
| Service type | Quarterly general pest, fourth visit of the agreement year |
| Target pests and activity | Spiders (webbing at eaves on the north and east walls) · odorous house ants trailing at the kitchen window and under the sink · rodents: gnawing on the monitoring block in station 2 |
| Conducive conditions | Rhododendrons touching the north wall · gap of about 1/4 in. under the garage side door · bark mulch piled against the siding at the northeast corner |
| Recommendations | Trim the rhododendrons 12 in. off the wall · fit a door sweep on the garage side door · pull the mulch back from the siding · a rodent exclusion inspection offered on quote Q-2026-0602 |
| Sign-off | A. Brennan, 11:04 AM · J. Halvorsen, 11:06 AM |
| Next service | February 2027, quarterly |
| Field | Exterior perimeter | Kitchen interior |
|---|---|---|
| Product as registered | TALSTAR TC FLOWABLE TERMITICIDE/INSECTICIDE | ADVION ANT GEL |
| EPA Reg. No. | 279-3206 | 100-1498 |
| Active ingredient | Bifenthrin 7.9% | Indoxacarb 0.05% |
| Concentration | 1.0 fl oz per gallon of water, 0.06% finished | Ready to use, 0.05% |
| Amount | 1.9 gal of finished spray, containing 1.9 fl oz of product | 7 g in 14 spots of about 0.5 g |
| Area and rate | 1,974 sq ft: foundation to 3 ft above grade (564 sq ft), 6 ft soil and mulch band (1,128 sq ft), protected eaves (282 sq ft) · 0.96 fl oz per 1,000 sq ft | Sink cabinet base, dishwasher kick plate gap, window sill crack |
| Method | Coarse low-pressure spray; webs brushed down first | Crack and crevice and spot placements on the ant trail |
| Times | 10:12 to 10:31 AM | 10:40 to 10:52 AM |
| Weather | Wind from the southwest, about 5 mph · 48°F | Not required: application within a structure |
| Equipment and plate | 3-gal pump sprayer on truck plate (sample number) | Bait gun |
| Re-entry and precautions | "Do not allow people or pets on treated surfaces until the spray has dried." Told to J. Halvorsen | Placements kept out of areas easily reached by children and pets. Told to J. Halvorsen |
| Station | Location | Contents | Activity | Action |
|---|---|---|---|---|
| 1 | Northeast corner | Non-toxic monitoring block | None | Block left |
| 2 | Garage side door | Non-toxic monitoring block | Gnawing, droppings | Block replaced; exclusion inspection recommended |
| 3 | South wall, gas meter | Non-toxic monitoring block | None | Block left |
| 4 | Northwest corner | Non-toxic monitoring block | None | Station lid latch replaced |
The stations hold no rodenticide, so they appear as devices, not as applications. If station 2 is later baited, that bait becomes a product row with its own registration number.
Washington application records under WAC 16-228-1320
Washington writes the content of the report into rule. WAC 16-228-1320, as amended by WSR 25-22-065 and effective January 1, 2026, requires a record of each application, including:
- The name and address of the person the application was made for, and the location of the land or site.
- The date, and the start and stop times.
- The product name on the registered label and its EPA registration number.
- "The direction from which the wind is blowing and estimated velocity of the wind in miles per hour (mph)" and "the temperature in degrees Fahrenheit".
- The total amount applied, the amount per acre or per 1,000 square feet, and "the concentration of pesticide that was applied".
- "The pests to be controlled (for PCO classification only)", and the crop or site treated.
- The "apparatus license plate number".
- The licensed applicator's full name, license number, address and phone, plus the names of others who applied, and the firm's name and address.
The timing is fixed: "Application records shall be completed and available to the department the same day the pesticides were applied." Records are kept for seven years. The director may request copies in writing, and a customer may ask in writing for the records of applications to the customer's property for the current season.
Two details of the rule set the sample's entries. The wind and temperature item "shall not apply to applications of baits in bait stations" or to "pesticide applications within structures", so the gel row records none. For the PCO classification, the amount is recorded to "the nearest ounce of product or to the nearest gallon of liquid spray per site". The sample records 1.9 gallons and 7 grams, finer than the rule asks.
Amount, concentration and the label maximum
The amount fields are arithmetic, and the label sets the limit they are checked against. The Talstar TC label lists a 0.02 to 0.06% dilution as a residual spray to outside surfaces of buildings. It gives the mix: "For 0.06% dilution, mix 1 fl oz. Talstar TC per gallon of water". It also caps the dose: "Do not apply more than 1fl. oz. Talstar TC per 1000 square feet" (EPA label, 279-3206, accepted August 5, 2024).
The sample's check runs in four steps:
- Area: 564 + 1,128 + 282 = 1,974 square feet.
- Ceiling: 1,974 / 1,000 x 1 fl oz = 1.97 fl oz of product.
- Applied: 1.9 gallons at 1.0 fl oz per gallon = 1.9 fl oz, under the ceiling.
- Rate recorded: 1.9 / 1.974 = 0.96 fl oz per 1,000 square feet.
The same label restricts residential outdoor sprays to listed surfaces. They include building sides up to 3 feet above grade, soil and vegetation around structures, and eaves protected from rainfall. The area column names those surfaces, so the record also shows the spray stayed within them.
The gel row follows its own label: 0.1 to 1.0 gram spots, applied as a crack and crevice or spot treatment (EPA label, 100-1498, accepted April 17, 2020). Registration numbers and percentages match EPA's Pesticide Product and Label System entries for 279-3206 and 100-1498, checked November 2026. PPLS lists 279-3206 under its registered name, Talstar TC Flowable, with a transfer from FMC Corporation dated March 24, 2025.
Re-entry statements on structural labels
The re-entry field on a structural report holds a sentence from the label, not a number of hours. A restricted-entry interval in hours belongs to the Worker Protection Standard. The Talstar TC label states that the WPS "applies when this product is used to produce agricultural plants on farms, forests, nurseries and greenhouses". For every other use, its non-agricultural box reads: "Do not allow people or pets on treated surfaces until the spray has dried." The Advion Ant Gel label reads: "DO NOT TREAT AREAS THAT ARE EASILY ACCESSIBLE TO CHILDREN AND PETS."
The report therefore quotes the statement for each product and names the person told. A blank re-entry field, or "4 hours" copied from an agricultural habit, records something the label does not say.
Service report entries in visit order
- Before arrival, copy the customer, site, agreement and last report's recommendations into the header.
- Inspect before treating, and record target pests, activity by location and conducive conditions.
- Check each device and record its number, contents, activity and action.
- Mix, and record product, registration number, dilution and the time each application starts.
- Read the wind and temperature at the site before any outdoor spray.
- Record the stop time, the amount used and the area treated; compute the rate and compare it with the label maximum.
- Write the label's re-entry statement for each product and tell the customer or leave written notice.
- Collect signatures, set the next service date, and close the record the same day: every product row carries a registration number, an amount, a site and, outdoors, a wind reading.
Pest control estimate template and pest control business plan template
The service report is the last of three documents. The pest control estimate template prices the initial and recurring treatments, product by product, before the customer signs. The pest control business plan template sets the route, the account count and the price the reports are measured against. Each report's product rows also feed the materials line of that plan, gallon by gallon.
Work order software and the same-day record
Washington's same-day rule favors a record finished at the stop. In FieldRanger, the visit is a digital work order on the technician's phone, with job details, customer information and instructions. A custom checklist can carry the WAC fields: registration number, concentration, amount, area, wind and temperature. Before and after photos attach to the work order, and the customer signs on site. Customer notes, such as a dog in the yard, are visible to every team member, and materials used on each job are logged for job costing. Recurring job templates hold the quarterly visits, and FieldRanger builds each technician's route for the day automatically. Job completions and notes are logged to the HubSpot timeline, and the invoice is generated from the completed work order. The work order software page lists the work order's fields.
FieldRanger has no weather feed, so the technician enters wind and temperature from a reading at the site. The registration number and the rate arithmetic above stay with the applicator, and the seven-year retention remains the business's obligation.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a pest control service report include?
The business and license number, customer and site, the licensed applicator, target pests and inspection findings, each product by name and EPA registration number with concentration, amount, area and method, start and stop times, wind and temperature for outdoor sprays, the label's re-entry statement, devices checked, recommendations and signatures.
Is there a pest control service report template in Excel?
Yes. The page offers a free .xlsx download with no sign-up: a Template sheet with the report's fields and a Sample sheet with the filled Tacoma report. In an Excel log, the header fields sit above one row per application, with columns for product, registration number, concentration, amount, area, rate, times, weather and re-entry statement.
Is there a pest control service report template PDF?
The download is a free .xlsx with no sign-up, not a PDF; Excel or Google Sheets saves it as one. Its Template sheet holds the report's fields, and its Sample sheet holds the filled Tacoma report.
How long must pest control application records be kept in Washington?
Seven years from the date of application under WAC 16-228-1320. The record must be complete and available to the Department of Agriculture the same day the pesticide is applied.
Does a pest control report need the wind speed?
In Washington, yes, for outdoor sprays: direction, estimated speed in mph and temperature. The rule exempts baits in bait stations and applications within structures.
What is the re-entry time after a pest control spray?
The label states it. The Talstar TC label's non-agricultural instruction is to keep people and pets off treated surfaces until the spray has dried; restricted-entry intervals in hours apply to agricultural uses under the Worker Protection Standard.
Station 2 at the February visit
Report PSR-2026-1183 leaves one open item: gnawing in the garage station, a 1/4 in. gap under the door beside it, and an exclusion quote waiting. The February report starts from that station. If the gap is sealed and the block is clean, the record shows the repair worked; if not, the quote moves up. The estimate and agreement forms for that work are among the free field service templates, and a demo shows the same fields as a FieldRanger work order. Start free trial on pricing gives 14 days with no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo