Template

Pressure Washing Estimate Template:House Wash, Roof Soft Wash, Flatwork by the Square Foot and Add-Ons

Pressure washing estimate template with house wash, roof soft wash, flatwork priced by the square foot and add-ons, filled for a home in Nashville, Tennessee.

Updated 9 min read

Download .xlsxExcel spreadsheet · 13 KB · Free, no sign-upFill it in online

A pressure washing estimate template is the priced scope of an exterior cleaning job: each surface with its measured area, method and price, the add-ons, plant protection, where the wash water goes, exclusions, the total and the terms. The example prices a house wash, a roof soft wash and the flatwork at one Nashville home.

The field list is one of the free field service templates kept by FieldRanger, which makes power washing software that runs inside HubSpot. That industry page follows a wash job through the software. This page is the estimate itself, with the measurements that set each price, and its template is a free .xlsx download with no sign-up.

Pressure washing estimate fields by surface, method and price

Pressure washing estimate template fields and what goes in each
FieldWhat goes in it
CompanyBusiness name, address, telephone, and the liability insurer and limit
Estimate number, date and expiryA unique number, the issue date and the date the price lapses
Customer and propertyName, address, number of stories, siding and roof materials, and gate or pet notes
MeasurementDate and method: tape and wheel on site, or plan dimensions from a measurement service
House washSiding material, wall area in square feet, method, solution and price
Roof soft washRoof covering, roof area, pitch, solution, dwell time, rinse method and price
FlatworkEach surface with its dimensions, area, finish, surface-cleaner method and price per square foot
Add-onsGutter face brightening, stain pre-treatment, deck or fence washing, sealing, each priced on its own line
Plant and property protectionPre-wetting and rinsing landscaping, covering outlets and fixtures, closing windows and vents
Water sourceThe customer's outdoor spigot, or water carried on the rig
Wash waterWhere runoff goes under the local stormwater rule: grass, sanitary sewer, or collected and hauled
Minimum chargeThe lowest price the company accepts for a visit
ExclusionsStains not guaranteed, oxidation, failing paint, existing damage, interior leaks
WeatherThe conditions that move the job, and how it is rescheduled
TotalThe sum of the lines, with options listed outside it
Terms and acceptanceDeposit, balance due, payment methods, signature and date

Filled pressure washing estimate: house, roof and flatwork in Nashville, Tennessee

The property is a two-story house with vinyl siding, an asphalt shingle roof with algae streaks on the north planes, a broom-finished concrete driveway, a front walk and a rear patio. The business, customer and prices are illustrative.

Filled pressure washing estimate, header and terms (example business, illustrative entries)
FieldExample entry
CompanyExample Exterior Cleaning LLC, 600 Example Pike, Nashville, TN 37211 · 615-555-0186 · general liability, $1,000,000 per occurrence (example)
Estimate number, date and expiryPW-2026-0218 · November 12, 2026 · valid until February 12, 2027
Customer and propertyAvery and Sam Lindqvist, 2210 Sample Drive, Nashville, TN 37214 · two stories · vinyl siding · asphalt shingles · side gate latch on the left, dog kept inside
MeasurementOn site, November 11, 2026, tape and measuring wheel
Plant and property protectionShrubs pre-wet and rinsed after each pass · exterior outlets and the doorbell camera covered · windows and dryer vent closed
Water sourceCustomer's spigot at the rear of the garage
Wash waterCurb inlet in front of the driveway blocked with a drain cover · downspouts turned onto the lawn during the roof wash · driveway rinse directed across the side lawn · oil spot pre-cleaned with absorbent, and the absorbent bagged as trash
Minimum charge$250.00 per visit (not reached)
ExclusionsRust and irrigation stains on the walk; oxidation on the siding; repair of loose siding panels or shingles
WeatherRoof work only on a dry day with no rain forecast for the dwell period; rain or frost moves the visit to the next open date
Terms and acceptanceNo deposit · balance due on completion · card, check or bank transfer · signature and date
Filled pressure washing estimate, measured areas and prices (illustrative rates)
LineMeasurementAreaRatePrice
House wash, vinyl siding, low-pressure soft washPerimeter 160 ft × 18 ft walls, plus two 36 ft gables at 9 ft rise3,204 sq ft$0.15$480.60
Roof soft wash, asphalt shingles, 6:12Plan 46 × 38 ft with overhangs × pitch factor 1.1181,954 sq ft$0.28$547.12
Driveway, broom-finished concrete, surface cleaner20 × 48 ft960 sq ft$0.18$172.80
Front walk, concrete4 × 32 ft128 sq ft$0.18$23.04
Rear patio, concrete16 × 20 ft320 sq ft$0.20$64.00
Add-on: gutter face brighteningFront and rear eaves92 lf$1.25$115.00
Add-on: oil stain pre-treatment, drivewayOne spot about 3 ft across1$35.00$35.00
Total$1,437.56
Option, outside the total: penetrating sealer, applied after dryingDriveway, walk and patio1,408 sq ft$0.65add $915.20

The patio carries a higher rate than the driveway because a covered grill corner and furniture move with it. The sealer option follows the cleaning on a later dry day and is accepted or declined on the signature line.

Square footage of walls, roofs and flatwork

Each price in the example is an area times a rate, so the measurement is the estimate. Wall area is the perimeter times the wall height, plus the triangles under each gable. The house measures 44 by 36 feet, so its perimeter is 160 feet and its walls hold 2,880 square feet at 18 feet. Each 36-foot gable with a 9-foot rise adds half of 36 times 9, or 162 square feet, and the two together bring the house wash to 3,204 square feet. Windows and doors stay in the area, because the crew rinses them as it goes.

Roof area is the plan area times a pitch factor: the square root of the rise squared plus 144, divided by 12. At 6:12 the factor is 1.118, so the 1,748 square feet of plan, overhangs included, become 1,954 square feet of roof. Flatwork is length times width for each surface, measured separately because the rate differs by surface.

Roof soft wash rows and the shingle manufacturers' rule

The roof line names its method because the method is the risk. The Asphalt Roofing Manufacturers Association tells owners to clean algae with a solution of liquid household bleach (sodium hypochlorite) and water, and notes that mixing directions may vary among shingle manufacturers. Its instruction on tools is direct: "DO NOT use a power washer or any type of brush or broom to clean algae from the roof surface." The solution is rinsed by gently spraying with water after it has stood on the roof for 15 to 20 minutes, and it is applied so as to avoid damage to other parts of the building and the landscape (ARMA, algae discoloration of roofs, June 6, 2024).

Those sentences become the roof row and its protection lines. The solution is mixed to the shingle manufacturer's directions, which the estimate names once the shingle line is known. The dwell is 15 to 20 minutes and the rinse is low pressure. Shrubs under the eaves are wet before the roof is treated and rinsed after. The estimate also says what the wash does not promise. ARMA states that "the effectiveness of such cleaning is only temporary, and the discoloration may recur", so a regrowth guarantee would be a second, priced product.

Wash water under Nashville's stormwater guidance

The wash water row is set by the city, and Nashville's is short. Metro Water Services' pressure washing guidance lists the practices: pre-plan the job by locating storm drains and the slope, block storm drains with impervious material where necessary, dry-clean the area with absorbents, and direct the wash water to a grassy area, the sanitary sewer or a collect-and-capture system. The same sheet warns that dirty pressure washing water entering a storm drain is an illicit discharge that can be fined, and it reserves the storm drain for water that is clean, free of sheen and free of chemicals (Metro Water Services, Pressure Washing Guidance, January 2013).

The example applies each point to one property. The roof wash uses a chemical solution, so its runoff is turned onto the lawn at the downspouts rather than down the driveway to the curb inlet. The curb inlet stays covered for the flatwork, and the oil spot is dry-cleaned with absorbent before any water reaches it. Heavily oiled pads, such as a restaurant dumpster area, go to the guidance's last column: collected and taken by an environmental waste company, priced as its own line.

Pressure washing estimate instructions on site

  1. Walk the property with the customer, and photograph each surface, every stain to be treated and any existing damage.
  2. Measure the walls, roof and flatwork, and record each area with the dimensions that produced it.
  3. Name the method and solution for each surface: soft wash for siding and roof, surface cleaner for concrete.
  4. Price each surface at its rate, then add each add-on as its own line and list options outside the total.
  5. Locate the spigot, the storm drains and the slope, and write the wash water row to the local rule.
  6. Write the protection lines, the exclusions and the weather terms.
  7. Check the total against the minimum charge, then confirm that every area on the price table matches the measurement column before the customer signs.

Pressure washing estimate, calculator and business plan

The estimate prices one property. A pressure washing calculator app does the area arithmetic for a single surface before the estimate is written, and its output becomes one line here. A pressure washing business plan template works at the scale of the company: the rates in the example's price column are inputs the plan sets from equipment, labor and chemical cost.

A copy of this field list in Word, Google Docs or a spreadsheet holds the same rows. The spreadsheet version can multiply area by rate on each line; the word processor version needs the arithmetic done by hand.

Estimating software and the accepted wash estimate

In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the deal, and PandaDoc sends it for signature. The won deal becomes a job with its context carried over. The dispatcher drags it onto a technician's day, and FieldRanger builds that technician's route for the day automatically.

At the house, the work order holds a job-specific checklist: drain cover placed, downspouts turned, no pressure washer on the shingles, shrubs rinsed. Before and after photos attach to the work order and sync to the customer's HubSpot record. The customer signs on site, the invoice is generated from the completed work order, and payment can be taken in the field through Stripe. A recurring job template holds next year's house wash. The estimating software page describes the estimate on the deal.

Rates per square foot and the minimum charge sit in the price book of services, parts and rates, so each estimate prices the measured areas the same way. Areas come from the tape, the wheel or a measurement service, and the mix comes from the shingle and chemical manufacturers' labels.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What should a pressure washing estimate include?

The company, estimate number and expiry, customer and property, measurement method, each surface with its area, method and price, add-ons, plant and fixture protection, water source, wash water handling, minimum charge, exclusions, weather terms, total, and the terms and signature.

How is a house wash priced by the square foot?

Multiply the house perimeter by the wall height, add the triangle under each gable, and multiply the area by the rate. In the example, 3,204 square feet at $0.15 is $480.60.

Can an asphalt shingle roof be pressure washed?

The Asphalt Roofing Manufacturers Association says not to use a power washer, brush or broom to clean algae from the roof surface. It describes a bleach and water solution, left 15 to 20 minutes and rinsed gently.

How is driveway cleaning priced on a pressure washing estimate?

By the measured area of each surface at the company's rate per square foot, with stain treatment as a separate line and a minimum charge for small jobs. The example prices a 960 square foot driveway at $0.18, or $172.80.

Where can pressure washing water go in Nashville?

Metro Water Services' guidance directs wash water to a grassy area, the sanitary sewer or a capture system, with storm drains blocked as needed. Dirty wash water entering a storm drain is an illicit discharge that can be fined.

Estimate PW-2026-0218 on its wash day

Once the Lindqvists sign, the roof waits for a dry forecast and the rest of the job goes with it, because the drain cover and the downspout turns are set once for the whole visit. The sealer line stays open until the concrete has dried. Next spring's house wash reprices from the same measurements. The invoice for this one is in the free field service templates hub; Start free trial on pricing runs 14 days without a card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo