Template
Repair Estimate Template:Diagnosis, Parts, Labor, Approval Threshold and Delaware's Written Estimate Rule
Repair estimate template with diagnosis, parts, labor and an approval threshold, a filled gas dryer repair example, and Delaware's written estimate rule.
A repair estimate template is the written price for fixing something that has failed: the item and the reported problem, the diagnosis and its fee, the parts and labor for the repair, the completion date, and the approval threshold above which the technician stops and asks again. The example below fills every field for a gas dryer repair in Dover, Delaware.
FieldRanger, which runs field service work inside HubSpot, keeps this form with its free field service templates. It is the general form, for appliances, equipment and anything else brought in or visited for repair. Its approval threshold borrows the formula Delaware writes into its auto repair law, set out after the example.
Repair estimate fields and what goes in each
The table lists the template's fields, offered as a free .xlsx download with no sign-up. The diagnosis rows come first because the repair lines depend on them.
| Field | What goes in it |
|---|---|
| Business | Name, address, phone, and the labor rate per hour |
| Estimate number and date | A unique number and the date of the estimate |
| Customer | Name, service address, phone, and how the customer prefers to approve changes |
| Item | Type, brand, model, serial number and approximate age |
| Reported problem | The failure as the customer describes it |
| Diagnosis | The tests performed and the readings that identify the failed part |
| Diagnostic fee | The amount, and whether it is credited if the repair is approved |
| Parts | One line per part: part number, condition (new, used, rebuilt or reconditioned), quantity, price |
| Labor | Hours times the rate, or a flat price per task |
| Surcharge | Any trip, fuel or after-hours charge, or "none" |
| Estimated total | Parts, labor and surcharge, less any diagnostic credit, plus tax where it applies |
| Completion date | When the repair will be finished, with the condition it depends on, such as part delivery |
| Approval threshold | The amount above the estimate that the bill may not exceed without the customer's approval |
| Customer limit | A not-to-exceed figure the customer sets, where the customer prefers one |
| Additional findings | Work found during diagnosis but not needed for the reported problem, each priced separately |
| Authorization record | Each approval: what was approved, amount, date, time, method and name |
| Replaced parts | Offered to the customer, returned under a warranty or exchange, or disposed of |
| Warranty | Parts and labor warranty on the repair |
| Valid until | How long the estimate's prices hold |
| Signature | Customer signature and date, approving the estimate |
Filled repair estimate: gas dryer with no heat in Dover, Delaware
The customer reported that the dryer runs but the clothes are still damp after a full cycle. The business, customer, appliance and prices are illustrative; the threshold formula and the tax treatment are sourced in the sections that follow.
| Field | Example entry |
|---|---|
| Business | Example Appliance Service, 15 Example Road, Dover, DE 19901 · 302-555-0153 · labor $120.00 an hour |
| Estimate number and date | RE-2026-0711 · November 12, 2026 |
| Customer | Avery Collins, 230 Sample Court, Dover, DE 19904 · 302-555-0168 · approves changes by phone |
| Item | Gas clothes dryer, ExampleBrand model GD-0000, serial 0000000 (illustrative), about 9 years old |
| Reported problem | "Runs, but no heat after the first few minutes" |
| Diagnosis | Igniter glows and the burner lights, then the flame drops out after 9 minutes; secondary gas valve coil reads open when warm; cycling thermostat opens early; exhaust vent about 70 percent blocked with lint along a 22-foot run |
| Diagnostic fee | $89.00, credited in full if the repair is approved today |
| Surcharge | None |
| Completion date | Today, November 12, 2026: both parts are on the truck |
| Approval threshold | 20 percent of the estimated total or $50.00, whichever is less: $38.80 on this estimate, a ceiling of $232.80 |
| Customer limit | None set |
| Additional findings | Igniter resistance near the top of its range: replacement $82.00 (part $52.00, labor 0.25 hour); vent cleaning, 22-foot run: $135.00 flat |
| Authorization record | Estimate signed 10:20 AM, $194.00; vent cleaning approved by Avery Collins by phone at 11:05 AM, $135.00, new total $329.00; igniter declined |
| Replaced parts | Old coil set and thermostat offered to the customer; customer declined; disposed of |
| Warranty | 90 days, parts and labor, on the coil set and thermostat |
| Valid until | November 26, 2026 |
| Signature | Avery Collins, November 12, 2026 |
| Line | Qty or hours | Unit price | Line total |
|---|---|---|---|
| Diagnosis, gas dryer no-heat | 1 | $89.00 | $89.00 |
| Gas valve coil set, new | 1 | $46.00 | $46.00 |
| Cycling thermostat, new | 1 | $28.00 | $28.00 |
| Labor: replace coils and thermostat, test cycle | 1.0 h | $120.00 | $120.00 |
| Diagnostic credit, repair approved | 1 | -$89.00 | -$89.00 |
| Estimated total | $194.00 | ||
| Approved addition: exhaust vent cleaning, 22 ft | 1 | $135.00 | $135.00 |
| Total after approved addition | $329.00 |
The coil set and thermostat cure the reported problem. The blocked vent is a separate finding, priced on its own line rather than folded into the repair. As new work, and at $135.00 far above the $38.80 threshold, the vent cleaning needed its own approval, logged with its time and method. The igniter stays on the record as a declined finding.
Delaware's written estimate rule and the approval threshold
Delaware regulates auto repair estimates in chapter 49A of Title 6, Auto Repair Fraud Prevention. The chapter covers auto repair work, defined as performing or attempting to perform repairs or maintenance on a motor vehicle for financial profit (6 Del. C. ch. 49A, Delaware Code Online, checked November 2026). A dryer is not a motor vehicle, so the chapter does not govern the example; the estimate adopts its threshold as a contract term.
Section 4904A sets three rules. Unless the customer waives it, the shop gives the customer a written statement before beginning work, containing the estimated completion date, the estimated price for the work including parts and labor, and the estimated surcharge, if any. If the customer waives the written estimate, the shop gives the price and completion date orally, and the person giving the oral estimate makes a written record, signs or initials it, and keeps it for no less than 2 years. And the shop may not charge, without the customer's consent, any amount that exceeds the estimate by 20 percent or $50, whichever is less.
The rest of the chapter maps onto other rows. Under section 4907A, the shop may not charge for repairs not originally authorized or requested unless it receives the customer's written or oral permission. Section 4906A requires an offer to return replaced parts, except parts returned to a manufacturer or distributor, hazardous materials, and items that must be disposed of or recycled. Section 4905A requires an invoice that states clearly whether any used, rebuilt or reconditioned parts were used, with a copy kept for no less than 2 years. A shop that does not post the required sign gives the customer a disclosure form under section 4908A, on which the customer may choose not to request a written estimate as long as the cost does not exceed a figure the customer writes in. That figure is the customer limit row.
The formula suits small repairs because the lesser of the two caps binds. On the dryer's $194.00, 20 percent is $38.80, below $50.00, so $38.80 is the threshold. On a $600.00 repair, 20 percent is $120.00 and the $50.00 cap applies instead. A vehicle repair in Delaware falls under the statute itself, and the auto repair estimate template adds the VIN, mileage and the chapter's disclosure form. The car repair estimate template covers the same work for a passenger car brought to a shop.
The estimate carries no tax line. The Division of Revenue states that Delaware does not impose a state or local sales tax, but does impose a gross receipts tax on the seller of goods or provider of services (Delaware Division of Revenue, Gross Receipts Taxes, checked November 2026). The gross receipts tax falls on the business, not on the customer's estimate.
Diagnostic fee, credit and the repair price
The diagnostic fee pays for the visit and the tests whether or not the customer approves the repair. Crediting it against an approved repair keeps the customer's total at the cost of the fix, while a customer who declines still pays for the diagnosis. The estimate states both outcomes on the fee row, so the credit is not a discount negotiated at the door.
Additional findings stay out of the estimated total. A finding that is not needed for the reported problem, such as the igniter here, is priced on its own line with its own approval, so the threshold measures only growth in the repair the customer asked for.
Repair estimate instructions from intake to authorization
- Record the item's type, brand, model, serial number and age, and the problem in the customer's words.
- Run the tests, write the readings, and name the failed part.
- State the diagnostic fee and whether it is credited.
- Price each part with its number and condition, and the labor as hours times the rate.
- Add any surcharge, apply the diagnostic credit, add tax where the state requires it, and state the estimated total and completion date.
- Set the approval threshold, in dollars, and enter any limit the customer sets.
- Price each additional finding on its own line.
- Obtain the signature, then log every later approval with its amount, time, method and name.
- Before closing the job, check that the final bill is within the threshold of the signed estimate, or that each amount above it has an approval in the record.
Repair estimates on the technician's phone
A paper estimate leaves the approvals in the technician's notes and the threshold in the technician's head. Once the job is done, the office types the invoice from both.
In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the HubSpot deal it belongs to, and it can be sent for signature through PandaDoc. The technician's phone carries the digital work order with the job details and checklists, before and after photos attach to it, and time is logged against the job. The invoice is generated from the completed work order, and payment can be taken in the field through Stripe. The estimating software page describes the estimate.
FieldRanger's features include no approval-threshold calculation and no separate approval log. The threshold and each approval are written on the estimate and in the customer notes, which every team member can see.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a repair estimate include?
The business and labor rate, an estimate number and date, the customer, the item with model and serial number, the reported problem, the diagnosis, the diagnostic fee and credit, parts and labor lines, any surcharge, the estimated total and completion date, the approval threshold, additional findings, the authorization record, replaced parts, the warranty, a validity date and a signature.
How much can a repair bill exceed the estimate?
Only as much as the estimate's approval threshold allows without the customer's consent. For auto repair in Delaware, 6 Del. C. § 4904A sets that limit at 20 percent or $50, whichever is less.
Is the diagnostic fee part of a repair estimate?
It appears on its own line, with a statement of whether it is credited when the repair is approved. In the example, the $89.00 fee is credited, so the approved repair totals $194.00.
Does a repair shop need approval before exceeding the estimate in Delaware?
For auto repair work, yes: a charge more than 20 percent or $50 above the estimate, whichever is less, needs the customer's consent, and repairs not originally authorized need written or oral permission.
How long is a repair estimate valid?
For the period the estimate states. The example holds its prices for 14 days, after which parts prices are checked again.
The Dover dryer after approval
Estimate RE-2026-0711 closed at $329.00: $194.00 signed at 10:20 AM and $135.00 approved by phone at 11:05 AM, with the igniter left as a declined finding for the next call. Its invoice repeats those three figures and the 90-day warranty, on a form from the free field service templates hub. An appliance shop can run a week of diagnosis calls from estimate to Stripe payment inside the 14-day Start free trial, with no card, and compare per-technician plans on pricing.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo