Template

Free Service Level Agreement Template:Every Field and a Filled Grocery Refrigeration Example

Service level agreement template for commercial maintenance: priorities, response and resolution times, coverage hours, credits and reports, with an example.

Updated 10 min read

Download .docxWord document · 52 KB · Free, no sign-up

A service level agreement template sets the standards a maintenance contractor commits to and how each is measured: priority levels, response and resolution times for each, coverage hours, exclusions, the credits owed when a standard is missed, and the monthly report. The example below fills every field for refrigeration and HVAC service at six Michigan grocery stores.

The field list is free and ungated, one of the free field service templates from FieldRanger, which makes field service software that runs inside HubSpot. The service agreement template sets the scope, visit frequency, price and term; the SLA attaches to it as a schedule and states how fast that work is delivered. The page is not legal advice: a lawyer in the state of the work confirms the wording, the credit clause first.

Service level agreement fields: priorities, clocks, credits and reports

The table lists the template's fields, and the page offers the SLA as a free .docx download with no sign-up. Each row becomes a numbered clause in a Word or Google Docs copy.

Service level agreement template fields and what goes in each
FieldWhat goes in it
Parties and parent agreementProvider and customer, and the service agreement or master agreement the SLA attaches to
Sites and equipment coveredEach site by address, and the equipment list the standards apply to
TermStart and end dates, matching the parent agreement
Fee basisThe monthly fee the credits are calculated from, by site
Priority definitionsEach priority level, defined by a condition at the site, not by the caller's urgency
Response timeFor each priority, the time from the logged call to a technician on site
Temporary restoration timeFor each priority, the time to make the site safe or restore partial function
Resolution timeFor each priority, the time to a permanent repair, or to a written repair plan when parts are on order
Coverage hoursThe hours and days each priority is covered, and the holiday list
Call intakeHow calls are logged, who on the customer side may log them, and how a priority is assigned
Clock rulesThe event that starts each clock, the event that stops it, and the events that pause it
ExclusionsConditions the standards do not cover, such as utility outages or equipment not on the list
Preventive maintenance standardThe share of scheduled visits completed in the month they fall due
Service creditsThe credit for each missed standard, the monthly cap, and how credits reach the invoice
Chronic failure remedyThe repeated failure that lets the customer remove a site or end the agreement, and the notice required
ReportingThe monthly report: its contents, its due date and who receives it
Review meetingsHow often the parties review the report and the priority definitions
Escalation contactsNames and phone numbers on each side, by level
SignaturesName, title, signature and date for each party

A simple SLA keeps six rows: priority definitions, the three clocks, coverage hours, credits and the report. The clock rules and exclusions are the rows that settle disputes, since a response time has no value until both parties agree when it started.

Service level agreement example: six grocery stores in western Michigan

A refrigeration and HVAC contractor serves six grocery stores around Grand Rapids under a one-year service agreement. The businesses and fees are illustrative; the times are an example of a service level agreement, not a market benchmark.

Filled service level agreement, terms (example businesses, illustrative entries)
FieldExample entry
Parties and parent agreementExample Refrigeration and Mechanical LLC, Grand Rapids, MI (provider) · Example Market Co. (customer) · Schedule B to service agreement SA-2027-0011
Sites and equipment coveredStores in Grand Rapids, Kentwood, Walker, Grandville, Jenison and Holland: refrigerated and frozen display cases, walk-in coolers and freezers, rack refrigeration systems and rooftop HVAC units, per the equipment list in Schedule A
TermJanuary 1 to December 31, 2027
Fee basis$1,450.00 per store per month; $8,700.00 a month for six stores
Call intake24-hour service line; calls logged by store managers and the customer's facilities manager only; each call gets a call number and a priority at intake
Clock rulesClocks start at the call number. Response stops at the technician's recorded arrival; resolution stops at the completed work order. Clocks pause while access is refused or the store asks for a later time, and resolution pauses during a written-confirmed parts backorder. A P2 call logged after 10:00 PM starts at 6:00 AM
ExclusionsUtility power or water outages; damage by vehicles, shoppers or other contractors; equipment not on Schedule A; product loss, which the service agreement addresses separately
Preventive maintenance standard95% of scheduled visits completed in the month due
Service credits5% of the affected store's monthly fee for each missed P1 response; 2% for each missed P2 response; capped at 20% of the month's total fee; applied to the next invoice without a claim
Chronic failure remedyThree missed P1 responses at one store within 90 days let the customer remove that store on 30 days' written notice
ReportingBy the fifth business day: every call with its priority, times and result, credits, preventive visits completed, and repeat calls on the same equipment within 30 days
Review meetingsQuarterly, with the priority definitions reviewed each time
Escalation contactsDispatcher, then service manager, then owner; customer facilities manager
SignaturesBoth parties, signed and dated December 10, 2026
Filled service level agreement, priorities and times (illustrative standards)
PriorityCondition at the siteResponseTemporary restorationResolutionCoverage
P1 EmergencyA case, walk-in or freezer cannot hold product at its set temperature (41 °F or less for refrigerated product); rack system alarm; refrigerant leak alarm; loss of store heat with outdoor air below 20 °F2 hours4 hours from the call24 hours, or a written planEvery hour of every day, holidays included
P2 UrgentOne unit drifting above its set temperature while product still holds; one rooftop unit down with the others running4 hoursNot applicable48 hours6:00 AM to 10:00 PM every day
P3 RoutineCase lighting, door gaskets, drain lines, noise, minor leaks with no product at riskNext business dayNot applicable5 business daysWeekdays 7:00 AM to 5:00 PM, holidays excluded
P4 PlannedPreventive maintenance and quoted improvementsPer the maintenance calendarNot applicableIn the month dueWeekdays 7:00 AM to 5:00 PM

FDA Food Code holding limits behind the P1 times

The P1 clocks come from the customer's food safety limits, not from round numbers. The FDA Food Code requires time/temperature control for safety food to be held cold at 41 °F or less (¶ 3-501.16(A)(2)). Where a store uses time as a public health control under written procedures, food that starts at 41 °F or less may be held without temperature control for up to four hours (§ 3-501.19(B)). That food is marked with the time it must be used or discarded (FDA Food Code 2026, page current as of September 30, 2026). The Food Code is a model offered for adoption by state and local agencies, so the edition in force at a store is the one its state has adopted.

The P1 standard works inside that four-hour window. A technician on site within 2 hours leaves 2 hours to restore cooling or move product to working equipment before the limit. The product decision belongs to the store under its own procedure; the SLA sets only the contractor's clock.

Response clock, resolution clock and the monthly report

Each standard is the gap between two recorded times: the call number, the technician's arrival and the completed work order. The report is no more accurate than those three timestamps.

Example monthly SLA report, March 2027, all six stores (illustrative)
PriorityCallsResponse metResponse missedResolution metCredits
P13303$0.00
P27617$29.00
P31212011$0.00
P4 preventive visits24 scheduled24 completed0Not applicable$0.00
Total$29.00

The missed P2 call came from the Holland store at 3:10 PM on March 18, and the technician's arrival was recorded at 7:52 PM: 4 hours 42 minutes after the call number. The credit is 2% of that store's $1,450.00 fee, $29.00, applied to the April invoice. The late P3 resolution was a drain line repair finished on the sixth business day. The example attaches no credit to P3, so it appears on the report and at the quarterly review only.

Service level agreement instructions from the equipment list to the first report

  1. Attach the SLA to its parent agreement, and list every site and every piece of equipment the standards cover.
  2. Define each priority by a condition a store manager can observe, such as a case temperature, not by how urgent the caller sounds.
  3. Set the response, temporary restoration and resolution times for each priority from the customer's own limits: product holding time, opening hours, safety.
  4. Set the coverage hours for each priority and the holiday list.
  5. Write the clock rules: the event that starts each clock, the event that stops it, and each event that pauses it.
  6. List the exclusions.
  7. Set the credit for each missed standard, the monthly cap and the chronic failure remedy, and have a lawyer review the clause.
  8. Specify the monthly report and the review meeting.
  9. Sign, and give the intake line and the priority table to every store.
  10. Before the first month closes, test the clocks on one real call: the call number, the arrival record and the completion record each carry a time, and the response time computed from them matches the dispatcher's log.

Service level agreements, service agreements and warranties

A service agreement sets the work: what is maintained, at what frequency, for what term and at what price. A service level agreement sets the performance of that work: how fast each kind of call is answered and fixed, and the credit when it is not. A warranty sets the provider's responsibility for a defect in work already done. The HVAC service agreement template carries one priority response row, a 24-hour window for one homeowner's heat pump; a customer with six sites expands that row into the schedule above. An IT SLA measures uptime as a share of the month, while a maintenance SLA counts arrivals and repairs call by call. The term itself is defined in what is a service level agreement.

Field service reporting software and the SLA clock

On paper, the dispatcher writes the call time, the technician writes the arrival time, and the office compiles the month from both, each a point the parties can dispute.

In FieldRanger, the dispatcher sets arrival windows and tracks on-time performance, assigns calls by dragging them on the calendar, and matches jobs to technicians by certification and expertise. Each clock-in records where the technician was, so the arrival time is tied to the store, and time is logged against each job. Job status updates in real time for dispatchers. Job status changes can trigger HubSpot workflows, such as a follow-up to the account manager when a P1 job is completed, within the portal's plan limits: Sales Hub Starter includes up to 50 workflows with restricted triggers and actions (HubSpot, Sales Hub pricing, checked November 2026). Reports show on-time arrivals by technician. A monthly report can be built with the drag-and-drop report builder and emailed on a schedule, and any report downloads as CSV or Excel; the field service reporting software page lists them.

Each recorded arrival time is compared with the priority table, and the credit worked out, in the report or the exported spreadsheet.

Frequently asked questions

What is an example of a service level agreement?

A commercial maintenance SLA that defines priorities by site conditions and sets times for each: a technician on site within 2 hours for a refrigerated case that cannot hold 41 °F, within 4 hours for an urgent call and by the next business day for routine work, with a credit off the monthly fee for each miss.

What should a service level agreement include?

The parent agreement, sites and equipment, fee basis, priority definitions, the response, temporary restoration and resolution times, coverage hours, call intake, clock rules, exclusions, the preventive maintenance standard, service credits, the chronic failure remedy, reporting and signatures.

What is the difference between response time and resolution time?

Response time runs from the logged call to a technician on site. Resolution time runs from the logged call to a permanent repair, or to a written repair plan when a part is on order.

What are service credits in a service level agreement?

Amounts taken off the next invoice when a standard is missed, calculated as a share of the monthly fee and capped for the month. A lawyer confirms that the credit clause is enforceable under the governing law.

What is the difference between a service level agreement and a service agreement?

A service agreement sets the work, its frequency, its term and its price. A service level agreement attaches to it and sets measurable standards for how fast and how reliably the work is delivered, with credits for misses.

The Holland store's March 18 call on the April invoice

One arrival 42 minutes past the P2 standard becomes a $29.00 credit line on Example Market's April invoice and an item for the next quarterly review. The service agreement this schedule attaches to, and the work orders each call produces, are among the free field service templates. FieldRanger is priced per technician on pricing; Start free trial gives 14 days with no card, enough to log a month of calls with their arrival times attached.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo