Template
Siding Estimate Template:Squares, Trim, House Wrap, Disposal, LP SmartSide Paint and Clearance Rules and a Sioux Falls Example
Siding estimate template with squares, trim, house wrap, disposal and the LP SmartSide paint deadline, filled for a Sioux Falls, South Dakota ranch re-side.
A siding estimate template is the priced scope of a re-siding job: wall area by elevation, squares, the siding product and its exposure, trim, house wrap and flashing, tear-off and disposal, the finish, the permit, tax, price and terms. The example fills every field for a hardboard tear-off and engineered wood lap re-side on a Sioux Falls, South Dakota ranch.
The field list is one of the free field service templates published by FieldRanger, the siding contractor software that runs inside HubSpot. One row comes from the siding manufacturer rather than from habit: LP's application instructions for primed lap siding set a deadline for paint, so the estimate carries a paint line that a vinyl estimate would not.
Siding estimate fields: elevations, squares, trim, wrap, finish and disposal
The table lists the template's fields, and the page offers them as a free .xlsx download with no sign-up. A version kept in Word, Google Docs or a spreadsheet carries the same rows in the same order.
| Field | What goes in it |
|---|---|
| Contractor | Business name, address, telephone, city contractor license and state tax license numbers |
| Estimate number, date and expiry | A unique number, the issue date and the date the price lapses |
| Customer and property | Name, address, year built, stories, and access for the trailer and ladders |
| Elevations | Each wall by compass side, with length, height and gable dimensions |
| Openings | Windows and doors on each elevation, with sizes, deducted from the siding area |
| Wall area and squares | Gross area for tear-off and wrap; net area, in squares of 100 square feet, for siding |
| Existing cladding | Type, layers, sheathing and stud spacing, confirmed at a test removal |
| Tear-off and disposal | Area removed, haul method, estimated tons and the landfill's rate |
| Sheathing allowance | Sheets of replacement sheathing included, and the unit price beyond them |
| Water-resistive barrier | House wrap product, taped seams and flashing tape at each opening |
| Siding | Manufacturer, product line, actual width, exposure, texture and board count with the waste allowance |
| Starter strip and clearances | Starter strip, and the distances kept above finished grade and above roofing |
| Trim | Corners, window and door casing, frieze and rake, by linear foot |
| Flashing | Kick-out flashing at each roof eave that meets a wall |
| Finish | Paint system, coats, surfaces and the date paint must be applied, or a prefinished product |
| Permit | Issuing department and fee |
| Exclusions | Gutters, soffit and fascia, windows, grading, and sheathing beyond the allowance |
| Options | Upgrades priced outside the total |
| Tax | How the state taxes the contract, and the line that shows it |
| Warranty | Manufacturer warranty and the conditions it sets; workmanship warranty |
| Payment terms and acceptance | Deposit, balance, methods, signature and date |
LP SmartSide application rules that move the price
A manufacturer's application instructions are a pricing document as well as an installation one, because the warranty depends on them. LP's instructions for its 38 and 76 Series primed lap siding open with the condition in capitals: "WARRANTY REMEDIES ARE NOT AVAILABLE IF THESE APPLICATION INSTRUCTIONS ARE NOT FOLLOWED" (LP, Application Instructions, 38 and 76 Series Primed Lap Siding, LPZB0515, dated December 8, 2023, checked November 12, 2026). Seven of its requirements reach the estimate.
| Requirement, as LP states it | Estimate line |
|---|---|
| "Apply paint as soon as possible or within 180 days." | A paint line with a completion date, or a prefinished product |
| "Paint all exposed surfaces, including all drip edges or where water will hang." | Bottom edges of every course and cut ends in the paint scope |
| "DO NOT USE stain or vinyl-based paint." | A 100% acrylic or oil system named in the finish row |
| "A properly installed WRB is required behind siding, unless exempt by building code." | House wrap over the full gross wall area |
| "Overlap successive courses of lap a min. 1 inch (25 mm)." | Exposure, and so the board count |
| "Min. 6 inch (152 mm) clearance must be maintained between siding and finish grade (ground cover)." | Starter strip height on each elevation; grading as an exclusion |
| "Install kick-out flashing at roof eave-to-wall intersections to direct water into gutter." | One kick-out per intersection |
The paint deadline changes the estimate most. Primed siding is a substrate, not a finish: a crew that installs it and leaves painting to the owner has handed over a warranty condition with a date on it. The estimate prices two coats inside the job, or offers LP's prefinished ExpertFinish line as an option without the paint line.
The overlap rule sets the arithmetic. LP's 2026 catalog lists the primed 38 Series 8-inch lap at an actual width of 7.84 inches, a length of 16 feet and a maximum span of 16 inches on center (LP SmartSide 2026 Product Catalog, checked November 12, 2026). A 1-inch overlap leaves 6.84 inches of exposure, not the 7 inches the nominal width suggests.
Filled siding estimate: hardboard tear-off and LP lap siding on a Sioux Falls, South Dakota ranch
The house is a 1962 one-story ranch, 28 by 52 feet, with 8-foot walls and two 5:12 gable ends. Its hardboard lap siding has swollen at the butt joints, and a test removal on the north wall found 1/2-inch fiberboard sheathing over studs at 16 inches on center, so the new siding is nailed through to the studs, within the 38 Series' 16-inch maximum span. At the rear, finished grade sits 3 inches below the bottom of the old siding. The business, customers and prices are samples; the rules come from the sources cited.
| Field | Sample entry |
|---|---|
| Contractor | Example Exteriors LLC, 410 Example Avenue, Sioux Falls, SD 57104 · 605-555-0148 · Sioux Falls Residential Roofing & Repair Contractor License and South Dakota contractor's excise tax license (sample numbers) |
| Estimate number, date and expiry | SE-2026-0219 · November 12, 2026 · valid until January 11, 2027 · work scheduled for April 2027 |
| Customer and property | Marisol and Ben Okafor, 2715 Sample Drive, Sioux Falls, SD 57105 · one story, built 1962 · driveway on the east side for the trailer |
| Elevations | Front and rear: 52 x 8 ft each · ends: 28 x 8 ft each, plus gables of 28 ft base and 5.83 ft rise |
| Openings | 10 windows, 3 x 4 ft · 2 doors, 3 x 6.75 ft |
| Wall area and squares | Gross 1,443 sq ft (14.43 squares) · openings 161 sq ft · net 1,283 sq ft (12.83 squares) |
| Siding | LP SmartSide 38 Series 8 in primed lap, cedar texture · 6.84 in exposure · 155 boards of 16 ft with a 10% waste allowance |
| Starter strip and clearances | Siding 6 in above finished grade on every elevation, 3 in higher than the old siding at the rear · 1 in above the garage roof |
| Finish | Two coats of 100% acrylic paint on siding, trim, bottom edges and cut ends, in the same mobilization, inside LP's 180 days |
| Exclusions | Gutters; soffit and fascia; windows; regrading at the rear; sheathing beyond 3 sheets |
| Warranty | LP SmartSide prorated 50-year limited warranty, conditional on the application instructions · workmanship 5 years |
| Payment terms | $5,552.18 at acceptance; balance of $12,955.10 on completion · check or card |
| Acceptance | Owners' signatures, date and paint color |
| Line | Quantity | Unit price | Line total |
|---|---|---|---|
| Tear-off, hardboard lap siding, gross wall area | 14.43 sq | $95.00 | $1,370.85 |
| Trailer haul to the Sioux Falls Regional Sanitary Landfill | 1 | $225.00 | $225.00 |
| Landfill tipping fee, construction and demolition debris, estimated | 1.6 tons | $40.00 | $64.00 |
| Sheathing repair allowance, 7/16 in OSB, installed | 3 sheets | $78.00 | $234.00 |
| House wrap, taped seams, gross wall area | 1,443 sq ft | $0.70 | $1,010.10 |
| Flashing tape at window and door openings | 12 | $30.00 | $360.00 |
| Starter strip, 3/8 x 1-1/2 in | 160 lf | $1.25 | $200.00 |
| LP SmartSide 38 Series 8 in primed lap, installed | 12.83 sq | $640.00 | $8,211.20 |
| Outside corner trim | 64 lf | $9.50 | $608.00 |
| Window and door trim | 173 lf | $9.00 | $1,557.00 |
| Frieze and rake trim | 165 lf | $8.50 | $1,402.50 |
| Kick-out flashing, garage and entry roof eaves | 2 | $48.00 | $96.00 |
| Paint, two coats 100% acrylic, net siding area with trim | 1,283 sq ft | $2.15 | $2,758.45 |
| Building permit, City of Sioux Falls, at cost | 1 | $40.00 | $40.00 |
| Subtotal | $18,137.10 | ||
| South Dakota contractor's excise tax, at the 2.041% bid factor | $370.18 | ||
| Total | $18,507.28 | ||
| Option, outside the total: LP ExpertFinish prefinished lap and trim, paint line removed | 1,283 sq ft | net add $0.25 | add $320.75 |
Sheathing beyond the three-sheet allowance is billed at $78.00 a sheet, counted with the owners while the walls are open. The landfill line is an estimate in tons; the invoice carries the scale ticket.
Wall area, squares and board count in the Sioux Falls example
The long walls hold 832 square feet and the ends 448. Each gable is a triangle with a 28-foot base and a rise of 14 feet times 5/12, or 5.83 feet: 81.7 square feet each. Gross area is 1,443 square feet, the basis for tear-off and house wrap.
Siding uses net area. Ten windows and two doors remove 161 square feet, leaving 1,283, or 12.83 squares. A 16-foot board at 6.84 inches of exposure covers 9.12 square feet; net area plus 10% waste is 1,411 square feet, or 155 boards. At a 7-inch exposure the same wall would have ordered 152, three boards short on the last day.
Trim is counted by run: 64 feet of corners, two boards at each of four 8-foot corners; 173 feet of casing around the openings; 165 feet of frieze and rake. The starter strip runs the 160-foot perimeter at 6 inches above grade, not at the old siding's line.
South Dakota contractor's excise tax and Sioux Falls permit rows
South Dakota taxes the contract, not the customer's purchase. The contractor's excise tax is 2% of the gross receipts of prime contractors on construction services and realty improvement projects, and "The gross receipts include the tax collected from the consumer." The Department of Revenue therefore publishes a bid factor: "a bid factor of 2.041% may be used to calculate the excise tax when preparing a bid or bill", while the return uses a straight 2%. The same guide states that contractors may list their tax expense as a separate line item on contracts and bills under SDCL 10-46A-12, and that contractors owe state and municipal sales or use tax on the materials they furnish (South Dakota Department of Revenue, Contractor's Excise Tax Guide, July 2026).
The example follows that guide. The excise tax line is the subtotal times 2.041%, $370.18; 2% of the $18,507.28 total is $370.15, a four-cent rounding difference. The material prices include the state's 4.2% and Sioux Falls' 2.00% municipal tax paid at purchase (South Dakota Department of Revenue, Municipal Tax Guide, July 2026). Contractors must also display their excise tax license number with the building permit.
The city sets the permit and license rows. Its Building Permit FAQ lists "Re-shingle and re-side" among projects that need a permit (City of Sioux Falls, Building Permit FAQs, checked November 12, 2026), and "The $40 minimum fee includes all residential re-shingle permits, siding replacements" (City of Sioux Falls, Residential Plan Review). Siding contractors on one- and two-family homes hold the Residential Roofing & Repair Contractor License, with $300,000 of general liability insurance and a $20,000 compliance bond (City of Sioux Falls, Residential Roofing & Repair Contractor).
The landfill charges construction and demolition debris "$40 per ton with a minimum charge of $20 per load" for loads of 3 cubic yards or more, and its rates "are valid through 12/31/2026" (City of Sioux Falls, Landfill Rates, checked November 12, 2026). The Okafor job hauls in April 2027, at the rate in force on the haul date.
Siding estimate instructions, from tape measure to signed scope
- Measure each elevation and gable, list every opening, and record the cladding, sheathing and stud spacing at a test removal.
- Compute gross area for tear-off and wrap, and net area in squares for siding.
- Take the actual width from the manufacturer's catalog, subtract the required overlap, and count boards at that exposure with waste.
- Measure trim by run: corners, casing, frieze, rake and starter strip.
- Walk the grade and roof lines, and mark where the clearances move the first course or call for kick-out flashing.
- Price the finish to the manufacturer's deadline, then add disposal, the permit, the tax line, exclusions and terms.
- Before sending, confirm that the boards cover net area plus waste and that the lines add up to the total.
Siding estimate, estimate template and construction estimate template
The siding estimate is a trade form of the general estimate template: the same header, terms and acceptance, with wall area, exposure, trim runs and a finish deadline in place of generic line items. A re-side that grows into new windows, a porch roof and framing repair has become a multi-trade job, and the construction estimate template organizes that scope by trade with allowances for each.
Estimating software and the siding job's paint deadline
A paper siding estimate holds the paint date in one cell, apart from the calendar that has to meet it.
In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the deal, and PandaDoc sends it for signature. The won deal becomes a job with its context carried over. Photos from the tear-off attach to the work order and sync to the customer's HubSpot record, which settles the sheathing count against the allowance. Time is logged against the job, and the invoice is generated from the completed work order. The estimating software page describes the estimate on the deal.
FieldRanger does not schedule multi-day jobs: each day of a re-side, from tear-off to the second coat of paint, is its own job on the calendar, and one job can carry the whole siding crew. A deposit invoice can go out before the tear-off, with the balance invoiced on completion.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a siding estimate include?
The contractor, the property, each elevation and its openings, gross and net wall area, squares, the siding product with its actual width and exposure, trim by linear foot, house wrap and flashing, tear-off and disposal, a sheathing allowance, the finish, the permit, exclusions, options, tax, warranty, terms and acceptance.
How are squares of siding calculated?
Add the area of each wall and gable, subtract windows and doors, and divide by 100. Tear-off and house wrap are priced on the gross area; siding is priced on the net area, plus a waste allowance.
How many boards of lap siding are in a square?
Divide 100 square feet by the area one board covers at its exposure. A 16-foot LP 38 Series board, 7.84 inches wide with a 1-inch overlap, covers 9.12 square feet, so a square takes 11 boards before waste.
Does LP SmartSide primed siding have to be painted?
LP's application instructions require paint as soon as possible or within 180 days, on all exposed surfaces including drip edges, and rule out stain and vinyl-based paint. A primed-siding estimate prices the paint or names who applies it and by what date.
Do siding contractors charge sales tax in South Dakota?
South Dakota imposes a 2% contractor's excise tax on gross receipts from realty improvement contracts, and the contractor pays sales or use tax on materials. State law allows the tax to appear as a separate line, and the Department of Revenue publishes a 2.041% bid factor for estimates.
The Okafor ranch between tear-off and the 180-day paint date
Estimate SE-2026-0219 schedules one April mobilization: tear-off, sheathing count, wrap, siding, trim and two coats of paint, with the permit number and the excise tax license number posted together. The rear starter strip goes on 3 inches higher than the old siding line, and the landfill's 2027 rate replaces the $40 figure on the invoice. The work order and invoice that follow are among the free field service templates; per-technician plans are on pricing, and Start free trial runs 14 days without a card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo