Guide
Contractor Sales Software:Modules, Funnel Stages, Automation Limits, Commission Pay Rules, Sales Tax by Contract Type and a Selection Checklist
Contractor sales software explained: lead, proposal and signature modules, funnel stages and automation, commission pay rules and sales tax by contract type.
Contractor sales software is the set of tools a contracting business uses to move a lead to a signed job: lead capture, a sales pipeline, estimates and proposals, electronic signature, follow-up automation and the handoff to the field. It differs from field service software, which runs the job after the signature, and from accounting software, which bills it.
Sales in a contracting business are lost between tools. A website lead never reaches the estimator's calendar. A proposal is signed at the kitchen table without the cancellation notice federal rules require. A commission is paid on a job the customer cancelled two days later, and a replacement system is taxed as if it were a repair. This guide belongs to the sales guides for service business owners. It defines the category against its neighbours, then sets out funnel stages and their automation. Two rule sets a sales system has to carry follow: commission pay under the FLSA, and sales tax by contract type in North Carolina. A sample month in Durham, a selection checklist and the software record close it.
Three terms carry the argument. A sales funnel is the sequence of stages a prospect passes through, counted at each stage. A pipeline is the CRM's version of the funnel: deals, each sitting in one stage with a value. A commission is pay calculated as a share of a sale's price or gross profit.
Contractor sales software and neighbouring categories
Sales for contractors differ from retail sales in one structural way: the price is set at the customer's property, after a measurement, and the sale becomes a job that a technician performs. Software for that work falls into five categories, which overlap. The examples below come from each vendor's own page and are not a ranking; the buying comparison is in the guide to the best sales software for contractors.
| Category | What it covers | Example from the vendor's own page |
|---|---|---|
| General CRM | Contacts, companies, deals in pipelines, email and sequences | HubSpot Sales Hub: custom pipelines from the Starter tier ([HubSpot Knowledge Base](https://knowledge.hubspot.com/object-settings/set-up-and-customize-pipelines)) |
| In-home sales app | The appointment itself: estimate, proposal, financing and a signed contract before the rep leaves | Leap SalesPro ([leaptodigital.com](https://leaptodigital.com/salespro/)) |
| Contractor CRM | Leads managed from first contact to referral, with marketing automation for follow-up | Builder Prime ([builderprime.com](https://www.builderprime.com/crm)) |
| Field service suite with a sales module | Proposals and financing inside the system that also runs the job | ServiceTitan lists Field Pro (formerly Sales Pro), Quotes & Proposals and Integrated Financing ([servicetitan.com](https://www.servicetitan.com/features)) |
| Field service software attached to a CRM | The job, dispatched from the CRM record on which the deal was won | FieldRanger on HubSpot, described below |
The categories divide on one question: where the deal record lives after the signature. In a general CRM, it stays in the CRM and the job is created elsewhere. In a field service suite, the sale and the job share one system that is not the CRM. The choice decides whether marketing, sales and field records can be joined in one report without exports.
Marketing to the top of the funnel is a separate subject, covered in the guide to contractor marketing. This guide starts where a lead exists.
Sales funnel creation for contractors: stages and exit records
A contractor's funnel is built from stages that each leave a record. A stage without a record cannot be counted, and a funnel that cannot be counted cannot be improved.
- Lead received. The record holds the source, the date and time, and the request in the customer's words.
- Qualified. The address sits in the service area, the scope is one the business performs, and the person can approve the work.
- Appointment set. A date, a time window and an estimator are assigned.
- Appointment held. Measurements, photos and the equipment or material condition are on file.
- Proposal presented. The options, prices and an expiry date are recorded.
- Signed. The signed proposal is on file, with the cancellation notice where the rule applies.
- Held. The cancellation window has closed without a cancellation, and the job passes to operations.
- Lost. The reason is recorded: price, timing, competitor, no decision.
Stage 7 exists because of a federal rule. The FTC's Cooling-Off Rule covers sales of $25 or more made at the buyer's residence, and $130 or more at other temporary locations. The buyer may cancel before midnight of the third business day, and the seller must refund within 10 business days of a cancellation. The seller must also complete a notice of cancellation that names a date not earlier than the third business day (16 CFR Part 429, read November 13, 2026). Equipment ordered and commissions paid at stage 6 are spent before the sale is final. The guide to roofing sales strategies works through those deadlines for one trade.
HubSpot's default deal pipeline shows why stage probabilities need the firm's own numbers. It ships with seven stages, from Appointment scheduled at 20% to Contract sent at 90%, and multiplies each deal's amount by the stage probability to produce the weighted amount (HubSpot Knowledge Base, pipelines, read November 13, 2026). A contractor whose proposals sign at 40% and who keeps the 90% default reports a pipeline more than twice its real size. The sample below shows the gap in dollars.
Automated sales funnels for contractors in HubSpot
A contractor builds an automated sales funnel from two tools that do different jobs. A sequence sends timed one-to-one emails and tasks from a rep's own mailbox. A workflow moves records, creates tasks and sends internal alerts when a property changes.
HubSpot documents the sequence limits. Sequences require a Sales Hub or Service Hub Professional or Enterprise subscription and an assigned Sales or Service seat. Each sequence holds up to 10 email templates, with no limit on task reminders. A contact who replies or books a meeting is unenrolled automatically, and workflows can enroll contacts into a sequence (HubSpot Knowledge Base, sequences, updated November 12, 2026). Workflows are available from Sales Hub Starter, which includes up to 50 workflows with restricted triggers and actions; Professional includes up to 300 (HubSpot Sales Hub pricing, checked November 2026).
Four automations cover a contractor's funnel:
- Speed to lead. A workflow creates a call task for the office the moment a lead record is created, with the lead source attached.
- Proposal follow-up. A sequence starts when the deal reaches Proposal presented: a recap email the next morning, a call task on day three, and a last email before the proposal's expiry date. A reply stops it.
- Held date. A workflow sets the held date three business days after signature, and only then notifies operations and the payroll clerk.
- Lost reason. A workflow requires a lost reason before a deal can close as lost, so the funnel report can sort losses.
The automation is only as accurate as the stage changes behind it. A rep who moves deals in batches on Friday afternoon produces a funnel in which every lead looks a week old.
Average commission in contractor sales and the FLSA pay rules
No federal survey publishes an average commission rate for contractor sales, and the figures quoted in trade forums cannot be checked against a source. The nearest published benchmark is total pay: ONET lists a 2025 median wage of $33.65 an hour for sales representatives of services ([ONET 41-3091.00](https://www.onetonline.org/link/summary/41-3091.00), read November 13, 2026), without separating commission from salary. A contractor setting a commission rate starts from its own gross margin and the pay it needs to offer, not from an average.
Commission plans for contractor sales take four forms:
- A percentage of the job's price, which is simple to calculate and pays the same on a discounted job as on a full-price one.
- A percentage of gross profit, which ties pay to margin and needs job costs before the commission can be paid.
- A flat amount per held job, which suits standard jobs with narrow price ranges.
- A tiered rate that rises with monthly volume, which needs a defined month and a defined held date.
Federal wage law decides whether the rep is owed minimum wage and overtime on top. The outside sales exemption covers an employee whose primary duty is making sales, or obtaining orders or contracts for services, and who is "customarily and regularly engaged away from the employer's place or places of business" in doing so. The salary requirements do not apply to that exemption (29 CFR 541.500). A rep who sells at customers' homes can fit it; a rep who sells by phone from the office does not.
A second exemption applies to employees of a retail or service establishment. Overtime is not owed where the regular rate exceeds one and one-half times the minimum wage and more than half of pay over a representative period of at least one month is commission (29 U.S.C. 207(i)). At the federal minimum of $7.25 (29 U.S.C. 206), the regular rate must exceed $10.875. Whether a given contracting business counts as a retail or service establishment is a legal question this guide does not settle. Pay records for the hours behind those tests are covered in the guide to contractor tracking software.
Sales tax for contractors: real property contracts and repair services in North Carolina
Sales tax for contractors turns on what the contract is, and North Carolina draws the line clearly. A real property contract is a contract to perform a capital improvement. The real property contractor is the consumer of the materials it installs and pays sales or use tax when it buys them (NCDOR, real property contracts, read November 13, 2026). Capital improvements include replacement or installation of a heating or air conditioning unit or system, and of roads, driveways, patios and sidewalks. Form E-589CI, the Affidavit of Capital Improvement, is generally issued and kept on file to substantiate the treatment.
Repair, maintenance and installation services are taxed differently. Their sales price, including installation charges stated separately, is subject to the general state rate and the applicable local and transit rates (NCDOR, repair, maintenance and installation services). The real property list excludes the repair or replacement of water heaters, gas logs and similar individual items that are not part of new construction or remodeling. The total rate in Durham County is 7.5%, including a 0.50% transit rate (NCDOR, current sales and use tax rates).
The same HVAC company therefore prices two kinds of proposal. On a system replacement, the tax on the equipment is a cost inside the price, paid at purchase. On a repair, tax is a line on the customer's invoice. Sales software that cannot carry the contract type on the proposal leaves the estimator to remember the rule on every job. Other states draw the line in other places; the state revenue department's contractor guidance is the source for each.
Sample sales month for a Durham HVAC replacement company
The sample is a hypothetical HVAC company in Durham, North Carolina, with one in-home sales rep and a crew of installers. Counts, prices and the commission rate are sample inputs, labelled as such; tax rules and the rate are NCDOR's, read November 13, 2026.
| Line | Figure | Basis |
|---|---|---|
| Leads received | 60 | Sample input |
| Appointments held | 32 | Sample input |
| Proposals presented | 30 | Sample input |
| Signed | 12 | Sample input; 40% of proposals |
| Cancelled within three business days | 1 | Sample input |
| Held | 11 | 12 − 1 |
| Held revenue | $126,500 | 11 × $11,500 average system price, sample input |
| Tax paid on equipment as consumer | $3,960 | 11 × $4,800 equipment cost, sample input, × 7.5% |
| Commission at 8% of held revenue | $10,120 | Sample rate × $126,500 |
| Commission withheld on the cancelled sale | $920 | 8% × $11,500, not paid because the job never held |
| HubSpot default weighted pipeline | $310,500 | 30 proposals × $11,500 × 90% Contract sent default |
| Signed value at the measured rate | $138,000 | 12 × $11,500 |
Three readings come out of the table. The default stage probability overstated the month's proposals by $172,500, because the firm's proposals sign at 40%, not 90%. Paying commission at signature would have paid $920 on a job that cancelled, which a held-date rule avoids. The $3,960 of equipment tax is a cost of the replacement jobs, priced in at the proposal; billed as a separate line, it would have been charged to customers whose contracts are not taxed that way. For comparison, a $650 repair in Durham County carries $48.75 of tax on the customer's invoice.
The funnel reads the same way. Lead to held is 11 of 60, or 18.3%; appointment to signature is 12 of 32, or 37.5%. A change at any one stage moves the month: four more appointments held at the same signing rate add one and a half signed jobs, about $17,250 at the sample price, and the stage counts show where a month was lost.
Contractor sales software selection checklist
- Write the funnel stages and the record each stage leaves, then confirm the software can hold every one, including a held date and a lost reason.
- List every lead source and confirm the software records the source on the lead without retyping.
- Build one real proposal in each product: options, photos, measurements and electronic signature.
- Confirm the proposal can carry the cancellation notice and its date for sales signed at the customer's home.
- Confirm the proposal can mark its contract type where state sales tax depends on it.
- Confirm the commission inputs exist on the record: held date, price, job cost and cancellation.
- Confirm a signed deal becomes a scheduled job without retyping, and that job status returns to the deal.
- Price the automation: the tier that includes sequences, and the workflow allowance at each tier.
- Push one test lead through every stage to a scheduled job, then verify that the funnel report counts it once at each stage.
Estimates, signatures and won deals in FieldRanger
FieldRanger runs field service inside HubSpot, so the funnel above lives on HubSpot records and the job starts where the deal ends. Contacts and companies sync two ways between HubSpot and FieldRanger.
An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the deal it belongs to. Estimates and agreements go out for signature through PandaDoc. A won deal becomes a job with its context carried over, assigned to a technician, and the deal record shows the job's status. Job completions, notes and updates are logged to the HubSpot timeline, and job status changes can trigger HubSpot workflows. Revenue can be followed from lead to completed job in HubSpot reports, and revenue reports show job revenue and margin by customer or service type. Invoices are generated from completed work orders and sync with QuickBooks, and payment in the field runs through Stripe.
Progress billing and retainage are not built. The estimating in HubSpot page shows how an estimate starts from the deal, and plans are on pricing, where Start free trial runs 14 days without a card.
Frequently asked questions
What is contractor sales software?
It is the set of tools a contracting business uses to move a lead to a signed job: lead capture, a pipeline, estimates and proposals, electronic signature, follow-up automation and the handoff to the field. Field service software runs the job afterwards.
What is the average commission for sales for contractors?
No federal survey publishes one. O*NET reports a 2025 median wage of $33.65 an hour for sales representatives of services without separating commission. Contractors set rates from their own gross margin, paying on price, gross profit, a flat amount per job or a tier.
How does a contractor create a sales funnel?
By defining stages that each leave a record: lead received, qualified, appointment set, appointment held, proposal presented, signed, held after the cancellation window, and lost with a reason. Each stage is then counted every month.
How is an automated sales funnel built for contractors?
With a workflow that creates a call task for each new lead, a sequence that follows up on presented proposals and stops on a reply, a workflow that sets the held date, and a required lost reason. In HubSpot, sequences need Sales Hub Professional or Enterprise.
Do contractors charge sales tax?
It depends on the state and the contract type. In North Carolina, a contractor on a capital improvement pays tax on its materials and does not charge it on the contract, while repair, maintenance and installation services are taxed on their full sales price.
Are in-home sales reps exempt from overtime?
A rep whose primary duty is sales and who is customarily and regularly away from the employer's place of business can fall under the federal outside sales exemption, which has no salary requirement. A rep selling by phone from the office does not.
In the Durham sample the pipeline said $310,500 and the signed proposals said $138,000. Contractor sales software earns its price when the second number is the one on the screen, the commission waits for the held date, and each proposal records which kind of contract it is.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo