Guide
Estimate Plumber Plumbing Labor Price List:Labor Hours by Task, a Boise Hourly Rate Build, Helper and After-Hours Rates, Minimum Charges and Published Job Totals
Estimate plumber plumbing labor price list: labor hours by task, a Boise hourly rate build, helper and after-hours rates, minimums and published job totals.
An estimate plumber plumbing labor price list is the labor half of a plumbing estimate: an hourly rate built from the company's own costs and a set number of labor hours for each common task, so that labor is priced as hours times rate while parts, permits and disposal sit on their own lines. A Boise sample builds the rate at $112.75 an hour.
A labor list fails in two directions at once. Built on the median wage, it under-prices every hour the senior plumber works; built from published job prices, it charges for parts twice, because those prices already contain the fixture. FieldRanger, the maker of plumbing software that runs inside HubSpot, publishes this guide with its other pricing and quoting guides. It separates the labor list from flat-rate books and time-and-materials quotes, builds a Boise hourly rate from published wages, and adds helper, senior and after-hours rates. Minimum charges, labor hours by task, a check against published job totals and a priced service call follow, with a checklist and the records that keep the hours honest.
Three terms recur. A labor unit is the number of plumber hours the list assigns to a task, such as 1.25 hours to replace a kitchen faucet. A billable hour is an hour charged to a customer; paid hours spent driving, at the supply house or in the shop are not billable. Loaded cost is the wage plus the employer's payroll taxes and insurance on it.
Labor price lists, flat-rate books and time-and-materials quotes
Three pricing methods share the same inputs and differ in what the customer is quoted. A time-and-materials quote bills the hours actually worked at an hourly rate, plus parts, so the customer carries a slow job. A flat-rate book quotes one price per task with labor and parts combined, so the company carries a slow job; its construction is set out in the plumbing flat rate pricing guide. A labor price list sits between them: labor is fixed per task by its labor unit, and parts are listed separately at cost plus a markup.
The separation is the point of the list. A customer comparing quotes sees what the labor costs and what the fixture costs; a water heater or a faucet chosen by the customer changes one line, not the whole price. The plumbing repair estimate guide shows how the same separation meets California's contract rules for small repairs.
Hourly labor rate build from Boise wages
The rate starts from the local wage, not the national one. Plumbers, pipefitters and steamfitters in the Boise City, Idaho metro area earned a median of $27.38 an hour in BLS 2025 data, against $30.67 nationally and $25.18 for Idaho as a whole; the 75th percentile in Boise was $35.89 (O\*NET OnLine, Idaho wages for 47-2152.00, read November 13, 2026). The employer adds 6.2 percent Social Security and 1.45 percent Medicare (IRS Topic 751, updated November 9, 2026), and federal unemployment tax of 0.6 percent on the first $7,000 of wages after the full state credit, or $42 a worker (IRS Topic 759, updated November 9, 2026). Idaho unemployment insurance is set by each employer's own rate and is left out of the sample.
Two sample choices turn the loaded wage into a cost per billable hour. The sample plumber is paid 2,080 hours, works 2,000 after 80 hours of paid holidays and vacation, and bills 65 percent of the hours worked, or 1,300 hours a year. Overhead, which here holds the dispatcher, the shop, the vans, insurance, software and marketing, is a sample $210,000 a year spread over four plumbers' 5,200 billable hours.
| Line | Basis | Amount |
|---|---|---|
| Annual wage | $27.38 × 2,080 paid hours | $56,950.40 |
| Social Security, Medicare and federal unemployment | 7.65% of wages + $42 | $4,398.71 |
| Workers' compensation | Sample 6% of wages | $3,417.02 |
| Loaded annual cost | Sum of the lines above | $64,766.13 |
| Labor cost per billable hour | $64,766.13 ÷ 1,300 billable hours | $49.82 |
| Overhead per billable hour | $210,000 ÷ 5,200 (sample) | $40.38 |
| Cost per billable hour | $49.82 + $40.38 | $90.20 |
| Rate at a 20% margin | $90.20 ÷ 0.80 | $112.75 |
| List rate | Rounded up | $115.00 |
The billable share moves the rate most. At 60 percent instead of 65, the same plumber bills 1,200 hours, labor cost per billable hour rises to $53.97, overhead per billable hour to $43.75, and the rate at the same margin to $122.15. A list built on an assumed share and never checked against logged hours drifts from the cost it was built on.
Rate tiers: senior plumber, helper and two-person tasks
One rate for every plumber under-prices the senior one. A plumber paid at the Boise 75th percentile of $35.89 costs $84,883.09 a year loaded on the same inputs, $65.29 per billable hour, and $132.09 an hour at a 20 percent margin with the same overhead. A list that sends that plumber at $115 an hour earns 8.1 percent on each hour rather than 20. The list either carries a second rate for work that needs the senior license, or assigns those tasks enough labor units to cover it.
A helper is priced as an addition to the plumber, not as a second plumber. Helpers to pipelayers, plumbers, pipefitters and steamfitters earned a median of $19.29 an hour in the Boise City metro in BLS 2025 data (O\*NET OnLine, Idaho wages for 47-3015.00, read November 13, 2026). Loaded on the same inputs and billed 1,300 hours, a helper costs $35.11 per billable hour; the overhead is already in the plumber's rate, so the helper line is $35.11 ÷ 0.80, or $43.89, listed at $44. Two-person tasks, such as carrying a tank water heater down basement stairs, list both units.
After-hours labor: overtime pay and the after-hours multiplier
The federal overtime rule sets the cost floor under an after-hours rate. Overtime must be paid at "not less than one and one-half times the regular rate" (29 CFR 778.107, Cornell Legal Information Institute, read November 13, 2026), for hours over 40 in a workweek (29 CFR 778.101). A night call that falls inside a plumber's first 40 hours costs the regular wage; the same call after 40 hours costs half the wage again.
That premium is smaller than a 1.5 times multiplier on the list rate. For the sample plumber, an overtime hour adds 0.5 × $27.38 plus 13.65 percent for payroll taxes and workers' compensation, or $15.56. A cost-based after-hours rate is therefore ($90.20 + $15.56) ÷ 0.80, or $132.20. A list that charges 1.5 times $115, or $172.50, prices more than the overtime: it prices the disruption to the next day's schedule, the call-out itself and the availability of a plumber at night. Both numbers belong in the owner's view of the list, so the after-hours rate is a decision about demand and not an error about cost.
Minimum charges and travel time
A minimum charge covers the hour that a short task cannot. Homewyse's faucet installation estimate, for example, carries an "Unused Minimum Labor" line for the "balance of 2 hr(s) minimum labor charge that can be applied to other tasks," and puts the national average cost to install a faucet at $514 to $845 per faucet in May 2026, fixture included (Homewyse, cost to install a faucet, read November 13, 2026). The sample list uses a one-hour minimum, $115, and lets the balance of that hour be applied to a second task on the same visit, so a customer who adds an angle stop to a 30-minute repair pays the minimum, not more.
Travel is either inside the rate or on its own line, never both. The sample rate already carries travel, because the 35 percent of worked hours that are not billable include driving. A separate trip charge on top of that rate collects the drive twice. Where a company prefers a visible trip charge, the billable share in the rate build rises to match.
Labor hours by task: a sample Boise labor price list
Labor units come from the median of logged jobs for each task, and the sample units below are placeholders until a company has its own. Each row assumes accessible, serviceable conditions; corroded fittings, code upgrades and wall repair move the job to additional rows.
| Task | Plumber hours | Helper hours | Labor price |
|---|---|---|---|
| Kitchen faucet replacement | 1.25 | $143.75 | |
| Toilet reset with new wax ring | 1.00 | $115.00 | |
| Toilet replacement, fixture supplied separately | 1.50 | $172.50 | |
| Garbage disposal replacement | 1.25 | $143.75 | |
| Angle stop replacement, each | 0.50 | $57.50 | |
| Frost-free hose bib replacement | 1.25 | $143.75 | |
| Shower valve cartridge replacement | 1.00 | $115.00 | |
| Pressure-reducing valve replacement | 2.00 | $230.00 | |
| Main shutoff valve replacement | 2.50 | $287.50 | |
| Sump pump replacement | 2.00 | $230.00 | |
| Tank water heater replacement, basement carry | 2.50 | 1.00 | $331.50 |
| Minimum charge per visit | 1.00 | $115.00 |
Parts, permits, disposal and equipment such as a drain machine are lines of their own. In a city that requires a permit for a water heater or a valve replacement, the fee is a pass-through line keyed to the address, and the labor of pulling the permit and meeting the inspector is either a labor row or part of the overhead, stated once.
Thumbtack job totals against the labor list
Published plumbing prices measure a different thing from a labor list. Thumbtack states that its figures "reflect the total cost of a job, not an hourly rate," and lists national average ranges of $193 to $470 for sink or faucet installation or replacement, $198 to $431 for toilet installation or replacement, and $748 to $2,138 for water heater installation or replacement, with emergency plumbing at $215 to $665 (Thumbtack, plumber cost, last updated November 2, 2026, read November 13, 2026).
The comparison is made at the job total, after parts. The sample toilet replacement lists $172.50 of labor; with a sample $210 fixture marked up to $262.50 and a wax ring and supply line at $18, the job totals $453.00, above Thumbtack's average range and below its $768 high end. The gap is explained by scope, not rate: the sample row's scope includes removal and haul-away of the old toilet. A labor list that cannot explain its gap to a published range in one sentence about scope is checked against its logged hours. Calls that start from these comparisons are discussed in the plumbing marketing guide.
Sample Boise service call priced from the list
The call is hypothetical: a Boise homeowner asks for a new kitchen faucet, the two angle stops under the sink replaced, and the pressure-reducing valve replaced after a pressure reading of 95 psi. The labor comes from the list; the parts costs and the markup are sample inputs.
| Line | Basis | Amount |
|---|---|---|
| Kitchen faucet replacement | 1.25 h × $115 | $143.75 |
| Angle stops, two | 2 × 0.50 h × $115 | $115.00 |
| Pressure-reducing valve replacement | 2.00 h × $115 | $230.00 |
| **Labor** | 4.25 h | **$488.75** |
| Faucet, customer-chosen | Sample cost $240, 25% markup | $300.00 |
| Angle stops and supply lines | Sample cost $46, 25% markup | $57.50 |
| Pressure-reducing valve and fittings | Sample cost $165, 25% markup | $206.25 |
| **Parts** | **$563.75** | |
| **Estimate total** | **$1,052.50** |
The labor line is set before the visit and does not move if the faucet takes 50 minutes or 90. If the plumber logs 5.5 hours against a list of 4.25, the company absorbs $143.75 of labor at list rate; if the same overrun recurs on the valve row, the row's unit is wrong. The plumbing invoice template shows how labor rows and parts lines appear separately on the bill.
Plumbing labor price list checklist
- Take the plumber and helper wages from local data for the metro, not the national median.
- Load each wage with payroll taxes, federal unemployment and the workers' compensation rate.
- Measure the billable share from logged hours and spread overhead over billable hours only.
- Add a senior rate, or larger labor units, for tasks that need the most experienced plumber.
- Price after-hours labor twice, at overtime cost and at the chosen multiplier, and record the reason for the difference.
- Set one minimum charge per visit and decide whether travel sits in the rate or on a trip line.
- Set each task's labor unit from the median of logged jobs that matched the row's conditions.
- Keep parts, permits, disposal and equipment on their own lines.
- Verify: each month, compare logged hours with labor units by task and reset any row whose median has moved by a quarter-hour.
Labor units against logged hours in FieldRanger
FieldRanger keeps the estimate, the job and the hours it took on the same HubSpot records. An estimate is built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and kept tied to the deal; PandaDoc can send it for signature, and a won deal becomes a job with its context carried over. Technicians clock in and out with time logged against each job, which supplies the logged hours that test each labor unit, and parts and materials used on each job are logged for job costing.
The invoice is generated from the completed work order, and invoices can stay in FieldRanger or sync to HubSpot as HubSpot invoices; invoices and payments also sync with QuickBooks, and payment can be taken in the field through Stripe. Revenue reports show job revenue and margin by customer or service type. The labor list itself lives in the price book of services, parts and rates that estimates and invoices are built from, and an estimate writes the HubSpot deal's line items and amount, so each labor row and parts line lands on the deal; the estimating software page shows the estimate record. Plans are listed on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
What is a plumbing labor price list?
A list of common plumbing tasks with the labor hours assigned to each and an hourly rate, so labor is priced as hours times rate while parts, permits and disposal are priced separately. It differs from a flat-rate book, which combines labor and parts in one price per task.
How much should a plumber charge per hour for labor?
The rate follows from the company's own costs. In the Boise sample, the $27.38 median wage loaded with payroll taxes and workers' compensation, billed 65 percent of worked hours and carrying $40.38 of overhead per billable hour, costs $90.20 and lists at $115 an hour at a 20 percent margin.
How do plumbers estimate labor time?
From the median hours logged on past jobs of the same task under the same conditions, written as a labor unit per task. Jobs with unusual conditions are priced from additional rows rather than by stretching the standard unit.
How much more do plumbers charge after hours?
The overtime cost is set by law: hours over 40 in a workweek are paid at not less than one and one-half times the regular rate, which adds $15.56 an hour for the sample Boise plumber. The after-hours rate itself is a pricing decision; 1.5 times the $115 list rate is $172.50.
Do published plumbing prices show labor costs?
Not separately. Thumbtack states its figures reflect the total cost of a job, not an hourly rate, so a published range includes parts and is compared with the job total, not with the labor line.
On the Boise call, $488.75 of the $1,052.50 estimate is labor, and every dollar of it rests on two numbers the owner controls: the 65 percent billable share in the rate and the 4.25 hours in the units. Other quoting methods are collected in the pricing and quoting guides, and plans are on pricing.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo