Template
Free Plumbing Invoice Template:Every Field and a Filled Burst Pipe Repair Example
Plumbing invoice template with every field a plumber's bill needs, a filled after-hours burst pipe example from Spokane, and how Washington taxes the labor.
A plumbing invoice template is the bill a plumber sends when a job is done: the job site, the problem and the repair, labor hours at the regular or after-hours rate, each part by size and material, the service call fee, sales tax, payment terms and the warranty. The example fills every field for a burst pipe repair.
The field list is free and ungated, one of the free field service templates kept by FieldRanger, which makes plumbing software that runs inside HubSpot. An invoice template for plumbing services differs from a general invoice template in five places: the call type and its rate, the authorization for that rate, the location of the work in the building, the parts by size and material, and the test that proved the repair.
Plumbing invoice fields and what goes in each
The table lists the template's fields; the free .xlsx download, with no sign-up, carries them on its Template sheet. A Word, Google Docs or spreadsheet copy follows it row for row.
| Field | What goes in it |
|---|---|
| Business details | Name, address, phone and billing email of the plumbing business |
| License or registration number | The plumbing contractor license or registration number, where the state or city issues one |
| Invoice number and date | A unique number from one sequence, and the date issued |
| Customer | The person or company billed, with the billing address |
| Service address and access | The job site, and how the plumber reached the work: crawl space hatch, meter pit, shutoff location |
| Call type and times | Scheduled, same-day or after-hours; the time of the call and the time of arrival, which set the rate |
| Authorization | Who approved the rate and the work, when and how, for a call that began without an estimate |
| References | Estimate number, work order number, the customer's purchase order and any permit number |
| Problem reported | What the customer saw, in the customer's words |
| Work performed | The fixture or line, where it runs, what was removed, what was installed and the material |
| Test performed | How the repair was proved: leak check at working pressure, drain flow test or camera run |
| Service call fee | The flat charge for coming out, stated separately from labor |
| Labor lines | Hours, the rate that applies (regular or after-hours) and the line total |
| Parts lines | Each part with size, material, quantity, unit and unit price |
| Permit fee | The permit charge passed through at cost, where the jurisdiction requires a permit for the work |
| Subtotal | The sum of the fee, labor and parts lines |
| Sales tax | The rate, the jurisdiction or location code, and the lines it applies to |
| Total, amount paid and balance due | The total, any payment received and the amount still owed |
| Payment terms and method | Due on receipt or Net terms; card, bank payment or check |
| Warranty | Labor warranty and the manufacturer's warranty on parts |
| Recommendations | Work found and not done, with its quote number |
A plumbing invoice template free of entries is the master copy. A sample plumbing invoice is the same template filled for one job, as below.
Filled plumbing invoice example: burst pipe repair in Spokane, Washington
A supply line split in a crawl space after a night below freezing, and the plumber came out after hours. The business, the customer and the prices are illustrative, not market rates.
| Field | Example entry |
|---|---|
| Business details | Example Plumbing and Drain LLC, 300 Example Avenue, Spokane, WA 99201 · 509-555-0142 · billing@example.com |
| License or registration number | Contractor registration EXAMPPD000XX (example) |
| Invoice number and date | PL-2026-0833 · November 10, 2026 |
| Customer | Riley Chen, 410 Sample Lane, Spokane, WA 99203 · riley@example.com |
| Service address and access | Same as billing address; crawl space hatch in the garage; main shutoff at the street-side wall |
| Call type and times | After-hours emergency; called 9:05 PM, arrived 9:40 PM, November 10, 2026 |
| Authorization | Service call fee and after-hours rate approved by Riley Chen by phone at 9:08 PM |
| References | Work order WO-2026-1184; no estimate (emergency call) |
| Problem reported | Water spraying in the crawl space; main shut off by the customer |
| Work performed | Split found in the 3/4-inch copper supply to the north hose bib, 4 feet inside the foundation wall. Damaged section cut out; 6 feet of 3/4-inch PEX-A installed with two copper-to-PEX transition fittings; hose bib replaced with a 12-inch frost-free sillcock; new line insulated |
| Test performed | Water restored; joints and sillcock checked for leaks at working pressure for 15 minutes |
| Payment terms and method | Due on receipt; paid by card on site, November 10, 2026 |
| Warranty | Labor 1 year; parts under the manufacturer's warranty |
| Recommendations | 22 feet of uninsulated copper remain in the crawl space; insulation quoted on Q-2026-0410, declined for now |
| Line | Qty or hours | Rate or unit price | Line total |
|---|---|---|---|
| After-hours service call fee | 1 | $189.00 | $189.00 |
| Labor, after-hours rate | 2.5 h | $165.00 | $412.50 |
| PEX-A tubing, 3/4 inch | 6 ft | $2.10 | $12.60 |
| Copper-to-PEX transition fitting, 3/4 inch | 2 | $18.50 | $37.00 |
| Frost-free sillcock, 12 inch | 1 | $64.00 | $64.00 |
| Foam pipe insulation, 3/4 inch, 6-foot length | 2 | $4.75 | $9.50 |
| Subtotal | $724.60 | ||
| Sales tax, City of Spokane, location code 3210, at 9.1% | $65.94 | ||
| Total | $790.54 | ||
| Paid by card on site | $790.54 | ||
| Balance due | $0.00 |
A scheduled version of the same repair starts from a plumbing estimate template, and the accepted estimate number goes in the references row. An emergency call has no estimate, so the authorization row carries the approval instead: the rate, the approver and the time.
Washington sales tax on plumbing labor and parts
The tax row taxes the labor and the service call fee as well as the parts, and that follows from Washington's rule. A prime contractor repairing an existing building for a consumer collects retail sales tax measured by the full contract price, and stating a service charge separately does not take it out of the tax (WAC 458-20-170, checked November 2026).
The rate follows the job site. The City of Spokane, location code 3210, carries a combined rate of 9.1%: 6.5% state and 2.6% local, for October 1 to December 31, 2026 (Washington Department of Revenue, Local Sales and Use Tax Rates, Q4 2026). A job in Spokane Valley, location code 3213, is taxed at 9.0% in the same quarter. Other states draw the line between taxable parts and nontaxable labor differently, as the contractor invoice template shows for Texas, so the tax row follows the state of the job site.
The registration row has a Washington basis too. Advertising that shows a registered contractor's name or address must show the current registration number (RCW 18.27.100, checked November 2026). The statute does not name invoices; carrying the same number on the invoice lets the customer check the registration against the business that billed.
Plumbing invoice instructions: from the call to the balance due
The order follows the call as it happens, and it ends with a check.
- Record the call type, the time of the call and the time of arrival. These decide whether the regular or the after-hours rate applies.
- For a call without an estimate, record the authorization before work starts: the rate quoted, who approved it, the time and the method.
- Copy the customer and the service address from the work order, and note the access: hatch, shutoff and meter locations save the next plumber a search.
- Write the problem in the customer's words, then the work performed in the plumber's: the fixture or line, where it runs, what came out and what went in.
- Record the test that proved the repair, with its duration.
- Enter the service call fee on its own line, then labor as hours times the applicable rate.
- Enter one line per part with size and material. A line reading "fittings" cannot be checked against the van's stock; "3/4-inch copper-to-PEX transition, 2" can.
- Apply sales tax under the state's rule for the job site, with the rate and location code.
- Record any payment taken on site, and state the balance due, the warranty and any declined recommendation with its quote number.
- Before sending, check that the times on the invoice match the times on the work order, and that the lines add up to the subtotal.
Plumbing truck stock and the parts lines
A plumbing truck stock list is the inventory a van carries so that a call like the Spokane repair ends on the first visit: tubing and pipe in common sizes, transition and repair fittings, shutoff valves, sillcocks, supply lines, toilet repair parts, water heater parts and pipe insulation. The searched plumbing truck stock list PDF is that list on paper, counted by hand at the end of the week.
The invoice and the stock list are two views of the same parts. The invoice records what left the van on one job; the stock list records what should be on the van before the next one. Field service software treats the van as a stock location: Microsoft's documentation for its field service application lists inventory capabilities "to manage truck stock" (Microsoft Learn, Overview of Dynamics 365 Field Service, July 21, 2026). In FieldRanger, each technician's truck can be its own stock location, and technicians check parts and materials out of a specific warehouse, so stock is counted where it sits; parts used on each job are logged for job costing, and low-stock warnings prompt the reorder. The warehouse inventory management software page covers the checkout.
Plumbing invoicing software and the completed work order
A template invoice for a night call is typed the next morning from the plumber's notes. The arrival time, the authorization and the part sizes pass from a phone or a clipboard into a document, and a time remembered the next morning is a time estimated.
In FieldRanger, the invoice is generated from the completed work order. Time is logged against each job as the technician clocks in and out in the mobile app built for technicians in the field, so the after-hours hours on the invoice are the hours on the clock, and the call rate and parts prices come from the price book. Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Scheduled work follows the same path from the sale: a won HubSpot deal becomes a job with its context carried over, job status shows on the deal record, and job completions, notes and updates are logged to the HubSpot timeline. The contractor invoicing software page sets out the sequence from the last task on site to payment.
The template suits a plumber who answers the night calls personally and writes the invoice from memory of one job. A company with an on-call rotation needs the clock, the authorization and the parts recorded at the time, by whoever took the call.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a plumbing invoice include?
The business details and any license or registration number, the invoice number and date, the customer and service address, the call type and times, the authorization for the rate, the problem and the work performed, the test that proved the repair, the service call fee, labor at the applicable rate, parts by size and material, sales tax, the total and balance due, payment terms, the warranty and any declined recommendation.
Is the plumbing invoice template free?
Yes. The page offers a free .xlsx download with no sign-up: a Template sheet with every field and the labor and parts lines, and a Sample sheet with the filled Spokane invoice.
Do plumbers charge sales tax on labor?
It depends on the state. In Washington, a contractor repairing a building for a consumer collects retail sales tax on the full contract price, labor included, under WAC 458-20-170. Other states tax parts and exempt labor, or tax neither, depending on the work and the property.
How to bill an after-hours plumbing call?
Quote the service call fee and the after-hours rate before the work starts, record who approved them and when, record the call and arrival times, and bill the fee and the after-hours labor on separate lines.
What is a plumbing truck stock list?
The list of parts and materials a plumbing van should carry, with a target quantity for each, so common repairs can be finished on the first visit. The invoice's parts lines show what was used and needs restocking.
Records after the Spokane call
The paid invoice closes the night call, and the declined insulation quote stays on Riley Chen's record as the next job to offer before the following winter. The free field service templates hub holds the estimate and work order forms on either side of this invoice. FieldRanger is priced per technician on pricing; Start free trial gives 14 days without a card, enough to run one after-hours call from clock-in to card payment.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo