Guide

Flat Rate Pricing:Task Rows, Payroll-Loaded Labor Cost, Published Price Ranges, a Break-Even Against Hourly Billing and a Priced Dryer Repair

Flat rate pricing for service work: task rows, a payroll-loaded labor cost, published price ranges, the break-even against hourly billing and a priced repair.

By Published Updated

14 min read

Flat rate pricing is a method of charging one fixed price for a defined task, agreed before the work starts and kept whatever the job takes. In the service trades the price is the task's book hours times the cost of a billable hour, plus parts and a target margin. Technicians quote it from a price book.

A flat price fails without producing a visible error. A price built from the wage alone leaves payroll taxes and health cover to come out of the margin. A price built on paid hours rather than billable hours under-recovers every task by the same proportion. A price that folds diagnosis into each repair overcharges the customer who already knows the fault. FieldRanger, field service software that runs inside HubSpot, publishes this guide with its other pricing and quoting guides. It covers the general method across trades, in this order: the senses of the term, the task row, and the cost of a billable hour, built from a Provo, Utah, appliance technician's wage and the employer's payroll costs. Diagnostic and trip charges and published flat rate prices come next. A dryer heating element replacement is then priced line by line. A break-even test against hourly billing shows where each method wins, and a Utah sales tax rule shows why a flat price still needs itemized lines. A checklist and the software record close the guide.

Four terms carry the method. A task is a unit of work with a fixed scope, such as replacing the heating element in an electric dryer. Book hours are the hours the price assumes for that task, as distinct from the hours any one job takes. A billable hour is an hour spent on a customer's job; drive time, parts runs and training are paid but not billable. The cost per billable hour is the cost of the technicians and the overhead, divided by the billable hours they produce.

Flat rate pricing in service work and subscription billing

The search term covers two different businesses. In subscription billing, a flat rate is one recurring price for a service level. Stripe's documentation describes customers choosing a service tier and paying a flat rate for it (Stripe Docs, set up flat rate pricing, checked November 13, 2026). In field service, the fixed unit is a task, not a period of access. The price stays the same whether the task takes 40 minutes or 70.

Flat rate pricing also differs from its neighbours in field service. Time and materials bills the hours worked and the parts used, so the customer carries a slow job. A not-to-exceed price bills time and materials up to a ceiling, so the customer carries a slow job only up to the cap. A flat rate moves all of the time risk to the company, which recovers it across many jobs of the same task. The flat rate meaning entry sets the three side by side on one job.

The task row as the unit of a flat price

A flat price is only as fixed as its scope. Two technicians given the same row should sell the same job at the same price. A job that does not match the row moves to another row or carries a priced add-on; it is not absorbed on site. The row therefore states what is included and the condition that moves the job elsewhere.

Task definitions in three trades (sample rows)
TaskIncluded in the priceMoves to another row when
Replace heating element, electric dryerPower isolation, panel removal, element swap, continuity test of the thermal fuse, test run, haul-away of the old partThe fault is the control board or motor, or the unit is gas-fired
Replace torsion springs, single residential door (pair)Unwinding, removal, two new springs, rewinding, balance test, lubricationCables, drums or the door section are damaged
Rekey one pin-tumbler lock cylinderRemoval, repinning to a new key, two keys cut, reinstallationThe cylinder is high-security, damaged or needs replacement

The same structure carries into every trade, with trade-specific fields added. The plumbing flat rate pricing guide adds a permit line keyed to the job's city. The HVAC flat rate pricing guide adds parts multipliers, and the flat rate electrical pricing guide adds additional-device rows. The guide to handyman flat rate pricing covers mixed small tasks on one visit.

Cost of a billable hour from wage and payroll costs

The labor rate in a flat price starts from the technician's wage. It ends with the share of paid hours that customers pay for. The sample company employs three appliance repair technicians around Provo. The median wage for home appliance repairers in the Provo-Orem-Lehi area was $27.98 an hour in 2025 data, against $24.51 nationally (O*NET OnLine, Utah wages for Home Appliance Repairers, BLS 2025 wage data, checked November 13, 2026).

The wage is the first of several employer costs per paid hour. The employer pays 6.2% Social Security tax on wages up to the 2026 base of $184,500, and 1.45% Medicare tax with no base (IRS Topic 751, reviewed November 9, 2026). Federal unemployment tax is 6.0% on the first $7,000 of each employee's wages. After the full 5.4% state credit it is 0.6%, or $42 a year per employee (IRS Topic 759, reviewed November 9, 2026). Health cover is the largest benefit. The average annual premium for single coverage was $9,804 in 2026; covered workers contributed $1,672, leaving $8,132 to the employer (KFF 2026 Employer Health Benefits Survey, published October 22, 2026). State unemployment insurance and workers' compensation rates are set per employer, so the sample uses its own rates for both.

Cost of one billable appliance repair hour, Provo sample (published and sample inputs)
LineBasisPer hour
Median wage, Provo-Orem-LehiBLS 2025 wage data via O*NET$27.98
Social Security, employer share6.2% of wage, IRS$1.73
Medicare, employer share1.45% of wage, IRS$0.41
Federal unemployment tax$42 a year ÷ 2,080 paid hours, IRS$0.02
State unemployment insurance1.0% of wage (sample rate)$0.28
Workers' compensation2.0% of wage (sample rate)$0.56
Health cover, employer share$8,132 ÷ 2,080, KFF 2026$3.91
Loaded paid hourSum of the lines above$34.89
Compensation per billable hour$34.89 × 2,080 ÷ 1,248 (sample 60% billable)$58.15
Overhead per billable hour$96,000 ÷ 3,744 billable hours (sample)$25.64
Cost per billable hour$58.15 + $25.64$83.79
Book rate at a 25% margin$83.79 ÷ 0.75 (sample margin)$111.72

The billable share moves every price in the book at once. Appliance work is a day of short calls separated by driving, so the sample sets the share at 60%. At 55% billable, the cost per billable hour rises to $91.41; at 65%, it falls to $77.35. A book priced at 60% while the technicians bill 55% under-recovers cost on every row by 9.1%. The gap stays until the share is measured from logged hours and the rate corrected.

Diagnostic, trip and parts lines

A flat repair price assumes the fault is already known. Finding it belongs to a separate diagnostic row, charged whether or not the customer approves the repair. Thumbtack's dryer repair guide puts service fees at $30 to $100. It describes appliance technicians charging a flat fee once they have determined the repair and its parts (Thumbtack, dryer repair cost, last updated March 31, 2026). The same publisher's appliance repair guide gives $75 an hour as the national average for appliance repair labor (Thumbtack, appliance repair cost, last updated March 31, 2026). Flat and hourly billing coexist within one trade.

The $75 figure sits below the sample's $83.79 cost of a billable hour. A company billing $75 for each on-site hour, with no service fee, loses $8.79 on every billable hour before any margin. An hourly company recovers its drive time through the service fee. A flat-rate company has already spread drive time into the cost per billable hour, so its trip charge is a policy choice rather than a cost line.

Published itemizations show the same structure. Thumbtack's garage door guide cites a pro in Kaufman, Texas, who charges $185 for a spring repair: $40 for transportation, $65 for parts and $80 for labor. A pro in Plano, Texas, charges $99 for the same repair (Thumbtack, garage door repair cost, last updated July 1, 2026). Both are flat prices to the customer; the first shows its lines.

Parts enter the task row at the supplier's current cost and leave at the book's margin. A 25% margin on price is a 33.3% markup on cost. A book that applies 25% as a markup earns 20% on its parts instead.

Flat rate prices in published cost guides

Published flat rate prices are a market check, not a source for the book. Each publisher measures something different. Thumbtack reports what customers paid professionals on its platform, including parts, labor and service fees. Homewyse builds an estimate from labor, materials and allowances, with a minimum labor charge.

Published prices for appliance and garage door repairs (checked November 13, 2026)
WorkPublished figureSource and date
Dryer repair, national average$127 to $324, with $203 the typical total; low end $66, high end $637Thumbtack, March 31, 2026
Dryer heating element replacement$30 to $200, depending on the partThumbtack, March 31, 2026
Minor appliance repair, national average$129 to $329, with $206 the typical totalThumbtack, March 31, 2026
Appliance repair labor$75 an hour, national averageThumbtack, March 31, 2026
Dryer repair, basic$412 to $583 per repairHomewyse, May 2026
Garage door repair, national average$235 to $695, with $403 the typical totalThumbtack, July 1, 2026

Sources: Thumbtack, dryer repair cost; Thumbtack, appliance repair cost; Homewyse, cost to repair a dryer; Thumbtack, garage door repair cost.

The two dryer figures differ by a factor of about two because they price different jobs. The Homewyse estimate includes a two-hour minimum labor charge, parts up to $25, planning, setup and cleanup. It excludes sales tax. The Thumbtack range is what customers paid in total. A book price outside one range is not wrong on that ground; the quote then states the scope that explains the gap.

Dryer heating element replacement in Provo: a priced sample task

The sample job is a failed heating element in an electric dryer at a house in Provo. The visit carries two rows. The diagnostic row is paid whatever the outcome; the repair row is quoted once the fault is found. The cost per billable hour comes from the table above. The book hours, part cost and margin are sample inputs.

Sample price book rows, dryer diagnosis and heating element replacement, Provo (sample inputs, published rates)
LineCalculationAmount
Diagnostic row: labor and overhead0.5 book hours × $83.79$41.90
Diagnostic row: calculated price$41.90 ÷ 0.75$55.86
Diagnostic row: book priceRounded up$59.00
Repair row: labor and overhead0.75 book hours × $83.79$62.84
Heating elementSample supplier cost$45.00
Terminals, wire and connectorsSample supplier cost$5.00
Repair row: costSum of the three lines above$112.84
Repair row: calculated price$112.84 ÷ 0.75$150.46
Repair row: book priceRounded up$155.00
Customer total before sales tax$59.00 + $155.00$214.00

At the book price, the repair row returns $42.16 on $155, or 27.2%. The customer's $214 sits inside Thumbtack's $127 to $324 range for dryer repair, $11 above its typical total. It sits well below the Homewyse estimate, whose two-hour minimum the visit's 1.25 book hours do not reach.

The diagnostic row can be credited against the repair as a sales policy. Credited in full, the customer pays $155 for 1.25 book hours that cost $154.74. The credit costs the company the diagnostic row's entire margin. A partial credit, or a credit only on repairs above a set amount, is priced into the book on purpose rather than granted on site.

Break-even between flat rate and hourly billing

The same repair can be billed hourly at the book rate of $111.72 an hour, with parts at the same 25% margin. The table follows the repair row at five actual durations. The book price stays at $155, with $50 of parts.

Profit on the sample element replacement, flat rate against hourly billing (sample inputs)
Actual hoursJob costFlat rate profitFlat rate marginHourly billHourly profit
0.50$91.90$63.1040.7%$122.53$30.63
0.75$112.84$42.1627.2%$150.46$37.61
1.00$133.79$21.2113.7%$178.39$44.60
1.25$154.74$0.260.2%$206.32$51.58
1.50$175.69−$20.69−13.3%$234.25$58.56

The two methods earn the same profit at 0.79 hours, just above the book time. Below it, the flat rate earns more, and the customer pays more than an hourly bill would have charged. Above it, the hourly method earns more and the customer carries the overrun. The flat row reaches zero profit at 1.25 hours, 67% above book time, and loses money on every minute past that.

Flat rate beats hourly billing for the company under three conditions. The task's scope is repeatable, so the row describes the job. The logged times cluster near book hours, so slow jobs past the zero-profit time are few and the fast ones pay for them. A row whose slowest tenth of jobs runs past 1.25 hours is priced wrong, whatever its median. Diagnosis is a separate row, so the repair price does not carry the uncertainty of finding the fault.

Hourly billing remains the better method for concealed conditions, first-of-a-kind work and repairs whose scope cannot be fixed in advance. A book can carry both: flat rows for defined tasks and an hourly line for the rest.

Sales tax on a flat price: the Utah itemization rule

A flat price is one number to the customer and several lines on the invoice. Utah's sales tax rules show why. Publication 42 exempts labor to repair tangible personal property attached to real property only if the labor is separately stated on the invoice. If it is not, the entire charge for labor and parts is taxable. The publication treats a dishwasher, freezer, refrigerator, stove, washer or dryer as not permanently attached, even when affixed; all repair charges on them are subject to tax. It also exempts diagnostics, testing or inspection that do not result in a repair (Utah State Tax Commission, Publication 42, Rev. 07/26, checked November 13, 2026).

For the Provo sample, the whole $214 is taxable, because the work is a dryer repair. A $59 diagnostic row billed alone, when the customer declines the repair, falls under the exemption for diagnostics. A Utah company doing flat-rate repairs on equipment attached to the house loses the labor exemption by showing one bundled line. The rule is Utah's. Other states draw the line elsewhere, so the invoice layout is checked against each state's own publication.

Flat rate pricing checklist

  1. Define each task with what the price includes and the condition that moves a job to another row.
  2. Set book hours from the median of logged jobs that matched the row, and check the slowest tenth against the zero-profit time.
  3. Build the loaded paid hour from the wage plus every employer cost: Social Security, Medicare, federal and state unemployment, workers' compensation and benefits.
  4. Divide by the measured billable share, then add overhead per billable hour, not per paid hour.
  5. Keep diagnosis as its own row and decide in advance whether, and how far, it is credited against the repair.
  6. Price parts at the book's margin from dated supplier costs; a 25% margin is a 33.3% markup.
  7. Compare book prices with published ranges, and state the scope on any quote that sits outside them.
  8. Lay out the invoice to meet the state's sales tax rules on separately stated labor.
  9. Re-run the cost per billable hour when wages, benefit premiums or the billable share change.

Flat-rate quoting with FieldRanger

FieldRanger holds the price book and the records the flat-rate method checks against. The price book carries the services, parts and rates that estimates and invoices are built from, so each task row above can sit in it at its flat price. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and kept tied to the HubSpot deal it belongs to, and the estimate writes the HubSpot deal's line items and amount. Estimates and agreements can go out for signature through PandaDoc, and a won HubSpot deal becomes a job with its context carried over. Estimating covers the quote side.

On the job, technicians clock in and out with time logged against each job: these are the logged hours a break-even review compares with book hours. Parts and materials used on each job are logged for job costing. The invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Revenue reports show job revenue and margin by customer or service type, so a row whose margin is falling shows up by service type. Contractor invoicing covers the billing side.

Frequently asked questions

What is flat rate pricing?

Flat rate pricing charges one fixed price for a defined task, agreed before the work starts and kept whatever the job takes. In service trades the price is book hours times the cost of a billable hour, plus parts and a target margin.

How are flat rate prices calculated?

Multiply the task's book hours by the cost per billable hour, add parts and sundries, then divide by one minus the target margin and round. The cost per billable hour is the loaded paid hour divided by the billable share, plus overhead per billable hour. The Provo sample element replacement calculates at $150.46 and books at $155.

Is flat rate pricing better than hourly billing?

For repeatable tasks whose logged times cluster near book hours, flat rate earns more and gives the customer a known price. For concealed conditions and work whose scope cannot be fixed in advance, hourly billing protects the company better. A price book can carry both.

Does a flat rate price include the service call fee?

It can, but a separate diagnostic row prices the two kinds of work correctly. Thumbtack puts appliance service fees at $30 to $100, checked November 13, 2026. Crediting the fee against the repair is a policy priced into the book.

How frequently should flat rate prices be updated?

Book hours whenever the logged median for a task moves, parts whenever a supplier changes a major price, and the cost per billable hour whenever wages, benefit premiums or the billable share change.

What is a flat rate price book?

A list of defined tasks, each with its scope, book hours, parts, price and the condition that moves a job to another row. Technicians quote from the book on site rather than pricing each job as it is done.

The $155 element replacement keeps its $42.16 only while the work stays near 45 minutes. At an hour and a quarter the same price earns $0.26, a loss of margin that a logged clock-out shows and a price list cannot. Start free trial, 14 days with no card, from pricing. The pricing and quoting guides carry the method through estimates and quotes, and the plumbing flat rate pricing guide applies it with permits in two cities.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo