Guide
House Pressure Washing Prices:Per Square Foot and per Story Rates, Soft Wash Pricing, Published Ranges and a Cost Build
House pressure washing prices: per square foot and per story rates, soft wash vs pressure, Thumbtack and Fixr ranges, and a sourced cost build for a house.
House pressure washing prices run $241 to $418 for an average house in Thumbtack's data (Thumbtack, updated January 5, 2026) and $500 to $900 in Fixr's (Fixr, updated January 31, 2025). Operators price a house by the square foot of home size or by the story, and price a soft wash apart from a pressure wash.
A house wash quote goes wrong in three places. A per-square-foot rate from a cost page is applied to floor area, though a two-story house of the same floor area has more wall. The quote assumes a pressure wash on fiber cement siding with a manufacturer's pressure limit, and the job becomes a soft wash with an unpriced chemical line. The price lands inside a published range but below the crew's own cost. FieldRanger makes power washing software that runs inside HubSpot, and this guide is one of its pricing and quoting guides. It sets out the published ranges, prices by square foot and by story, separates soft washing from pressure washing, lists the cost inputs, and builds a sample price for a two-story house in Georgia, with a checklist and the software record.
Four terms recur. A pressure wash cleans with the force of water from the pump. A soft wash applies a cleaning mix at low pressure, lets it dwell and rinses it off, so the chemistry does the cleaning. SH is sodium hypochlorite, sold to the trade at 12.5 percent. Downstreaming draws the mix into the water line after the pump, so the chemical never passes through it.
Published house washing price ranges: Thumbtack and Fixr
Two consumer cost pages, read on November 12, 2026, publish house washing prices by home size.
| Home size | Thumbtack, updated January 5, 2026 | Fixr, updated January 31, 2025, labor included |
|---|---|---|
| 1,000 square feet or less | $190 to $291 | $300 to $800 at 1,000 square feet |
| 1,000 to 2,000 square feet | $273 to $408 | $450 to $1,200 at 1,500; $600 to $1,600 at 2,000 |
| 2,000 to 3,000 square feet | $331 to $488 | $750 to $2,000 at 2,500; $900 to $2,400 at 3,000 |
| 3,000 to 4,000 square feet | $414 to $599 | Not listed |
| 4,000 to 5,000 square feet | $550 to $834 | Not listed |
The two pages differ by a factor of two to three at every size. They describe different things. Thumbtack's ranges are "according to Thumbtack data", the prices its customers paid. Fixr's are stated as labor included, with a national average of $700 and a high end of $2,000. Neither page states its sample size, so the pair works as a floor and a ceiling for a market, not as a price for a given house.
Average pressure washing prices also depend on the minimum charge. Fixr states that companies charge $50 to $150 per hour and that "many companies have minimums of $100-$350", which sets the price of a small house regardless of its area (Fixr). The pressure washing prices guide covers rates for driveways, decks and roofs alongside the house.
Pressure washing house prices by the square foot
Per-square-foot rates on the two pages run from 8 cents to 80 cents. Thumbtack gives $0.08 to $0.47 per square foot. Fixr gives $0.30 to $0.80 for pressure washing, $0.35 to $0.70 for power washing and $0.25 to $0.35 for soft washing, labor included, and by siding $0.30 to $0.40 for vinyl, $0.30 to $0.50 for wood and $0.33 to $0.45 for stucco.
Both pages band by home size, which is floor area, and the wash covers wall area. The two diverge with the number of stories. A sample comparison of two 2,400-square-foot houses with 9-foot stories shows how far:
| Item | One story, 40 by 60 feet | Two stories, 30 by 40 feet |
|---|---|---|
| Floor area | 2,400 square feet | 2,400 square feet |
| Perimeter | 200 feet | 140 feet |
| Wall height | 9 feet | 18 feet |
| Wall area to wash | 1,800 square feet | 2,520 square feet |
The two-story house has 40 percent more wall to wash at the same floor area, and the top half is reached by ladder or extension wand. A rate per square foot of floor area underprices it unless the rate changes with the stories.
House washing prices by story: one, two and three stories
Thumbtack publishes the story effect directly: $218 to $363 for one story, $279 to $472 for two and $286 to $509 for three (Thumbtack). The midpoint rises from $290.50 for one story to $375.50 for two. That 29 percent step is smaller than the 40 percent wall-area step in the sample geometry above.
Fixr's story table runs wider, $72 to $1,000 for one story, $120 to $1,600 for two and $200 to $2,800 for three, and the same section's text gives "$300 to $600" on average without reconciling the two (Fixr).
Two pricing methods follow from those figures:
- A rate per square foot of wall area, measured from the perimeter and the wall height, which carries the story effect inside the measurement.
- A base price per story, with a step for each story above the first, which is faster to quote from the street and needs the step set from the crew's own time on two-story jobs.
Soft wash and pressure wash: siding rules and price
The siding manufacturer decides the method before the price does. The Polymeric Exterior Products Association, which speaks for vinyl siding makers, states that "a power washer can be used, but with caution", that the stream is not aimed upward because that "can force water behind the siding panels", and that "Some siding manufacturers do not recommend power washing" (PEPA, How to Clean Vinyl Siding, read November 12, 2026). James Hardie's homeowner care guide for fiber cement siding says that "Acid and high pressure washing can damage the fiber cement surface and is not recommended". Where a pressure washer is used, the guide calls for "a wide fan tip, keep a minimum of 6 feet from the wall and keep the pressure below 1500 psi" (James Hardie, Homeowner Care and Maintenance Guide, 2015).
A soft wash meets those limits by moving the work to the mix. The cleaning supplier Racenstein recommends "a 1% mix on most siding" and "no more than a 3% mix" on roofs, from 12.5 percent bleach (Racenstein, What Mix Should I Use for Soft Washing, January 1, 2020).
The price follows the method. Fixr's typical job figures are $300 to $600 for pressure washing and $375 to $525 for soft washing, with soft washing per square foot at $0.25 to $0.35 against $0.30 to $0.80 for pressure washing. A soft wash spends less crew time at the wall. It adds a chemical cost the pressure wash does not carry, which the sample below prices.
Cost inputs for a house wash in Georgia
The cost build uses published inputs, each read on November 12, 2026.
| Input | Figure | Source |
|---|---|---|
| Crew lead wage | $17.99 an hour, 75th percentile, Cleaners of Vehicles and Equipment, Georgia | [O*NET OnLine, local wages 53-7061](https://www.onetonline.org/link/localwages/53-7061.00?st=GA), BLS OEWS 2025 wage data |
| Crew member wage | $14.72 an hour, median, same occupation and state | Same |
| Employer Social Security and Medicare | 6.2 percent plus 1.45 percent, 7.65 percent of wages | [IRS, Topic 751](https://www.irs.gov/taxtopics/tc751), reviewed November 9, 2026 |
| Sodium hypochlorite, 12.5 percent | $35.99 per 4-gallon case, $9.00 a gallon | [Simplified Pools, HASA 4 gallon case](https://simplifiedpools.com/products/hasa-hasachlor-4-gallon-chlorine-case) |
| Surfactant dose | 10 ounces per gallon of SH for a 1 percent downstream house mix | [Racenstein, ProTool Stick](https://jracenstein.com/protool-stick/?sku=83-01) |
| Water | About $2 an hour | [Fixr](https://www.fixr.com/costs/pressure-wash-house) |
| Gasoline, Lower Atlantic | $3.609 a gallon, week of November 9, 2026 | [EIA, Gasoline and Diesel Fuel Update](https://www.eia.gov/petroleum/gasdiesel/) |
| Vehicle | 76 cents a mile, July through December 2026 | [IRS, Standard mileage rates](https://www.irs.gov/tax-professionals/standard-mileage-rates) |
The surfactant's price is left out of the build: the supplier's page lists $35.20 with two container sizes and does not state which one the price applies to. The dose is kept so the line can be priced from an invoice.
Sample cost build: two-story vinyl house in Gwinnett County, Georgia
The sample is a hypothetical soft wash of a 2,400-square-foot, two-story vinyl house in Gwinnett County, Georgia, not a client's job. The inputs in the table above are published; the house geometry, hours, miles, mix volume, engine fuel, overhead and margin are sample inputs, labelled as such.
| Line | Basis | Amount |
|---|---|---|
| Labor | 2-person crew, $17.99 plus $14.72 an hour, 2.5 hours on site and 1.0 hour driving (sample) | $114.49 |
| Employer payroll taxes | 7.65 percent of labor | $8.76 |
| Sodium hypochlorite | 30 gallons of 1 percent mix (sample) takes 2.4 gallons of 12.5 percent SH at $9.00 | $21.59 |
| Water | 2.5 hours at about $2 an hour | $5.00 |
| Pump engine fuel | 0.75 gallon (sample) at $3.609 | $2.71 |
| Vehicle | 24 miles round trip (sample) at 76 cents | $18.24 |
| Direct cost | Sum | $170.79 |
| Overhead | Insurance, phone, software and marketing, $45 per job (sample) | $45.00 |
| Full cost | Sum | $215.79 |
| Price at a 40 percent margin (sample) | Full cost divided by 0.60, rounded | $360.00 |
The price lands inside Thumbtack's two-story band of $279 to $472 and its 2,000-to-3,000-square-foot band of $331 to $488. It sits below Fixr's soft wash rate, which at $0.25 to $0.35 a square foot gives $600 to $840 for the same floor area. At $360 the job earns 15 cents per square foot of floor area and 14.3 cents per square foot of the 2,520 square feet of wall.
Three lines carry the result. Labor and payroll taxes are 57 percent of full cost. The sodium hypochlorite, $21.59, is the line a pressure wash quote leaves out. The surfactant, 24 ounces at the supplier's dose, adds a cost the sample cannot price from the listing. The same method prices commercial buildings, where the measurement and the access equipment change, as the commercial pressure washing prices guide sets out.
House wash quote checklist
- Identify the siding material, and read the manufacturer's cleaning guidance before choosing pressure or soft wash.
- Count the stories, and measure the perimeter and wall height or apply a per-story step.
- Price labor from the crew's actual wages plus employer payroll taxes, for time on site and time driving.
- Price the SH from the mix strength and the gallons of mix the house needs, and add the surfactant at its label dose.
- Add water, engine fuel and vehicle cost per job.
- Allocate overhead per job, then apply the margin.
- Compare the result with the published ranges and the minimum charge, and investigate any price outside them before sending it.
- Verify after the job: log actual hours, gallons of SH and miles against the estimate, and adjust the inputs for the next quote.
The pressure washing business plan template carries these inputs into a full year's plan.
House wash estimates, job costs and invoices in FieldRanger
The cost build becomes the estimate. In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and tied to the HubSpot deal it belongs to. Once the deal is won, it becomes a job with its context carried over, scheduled by dragging it on the calendar, and FieldRanger builds each technician's route for the day automatically.
On site, clock-ins and clock-outs log time against each job, which is item 8 of the checklist, and before and after photos attach to the work order. The invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Revenue reports show job revenue and margin by customer or service type, so house washes and soft washes can be compared with the 40 percent the sample set. The estimating page shows the estimate setup, plans are on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
How much to charge for pressure washing a house?
Price it from cost: crew wages and payroll taxes for time on site and driving, chemicals, water, fuel, vehicle and overhead, then a margin. The sample on this page prices a two-story vinyl soft wash in Georgia at $360, inside Thumbtack's two-story range of $279 to $472.
What are average pressure washing prices for a house?
Thumbtack's data gives $241 to $418 for an average house, updated January 5, 2026, and Fixr gives an average range of $500 to $900 with a $700 national average, updated January 31, 2025.
Are pressure washing services prices set per square foot or per story?
Both methods are used. Thumbtack gives $0.08 to $0.47 per square foot and story bands of $218 to $363 for one story and $279 to $472 for two. A per-square-foot rate on floor area underprices a two-story house unless it changes with the stories.
Is soft washing a house more expensive than pressure washing?
Fixr gives $375 to $525 for a typical soft wash and $300 to $600 for a pressure wash. A soft wash adds a chemical cost, about $21.59 of sodium hypochlorite in this page's sample, and spends less crew time at the wall.
What pressure is safe for washing fiber cement siding?
James Hardie's care guide calls for a wide fan tip, at least 6 feet from the wall and under 1,500 psi where a pressure washer is used, and recommends low-pressure water and a soft brush.
What minimum charge do pressure washing companies set?
Fixr states that many companies have minimums of $100 to $350, which sets the price of a small house regardless of its area.
At $360, the Gwinnett sample sits inside Thumbtack's two-story band and $240 below the bottom of Fixr's soft wash range for the same floor area; the $21.59 of sodium hypochlorite is the line a rate copied from either page does not show.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo