Guide
Pressure Washing Prices:Rates per Square Foot, per Hour and per Job, Built From Cost
Pressure washing prices for operators: 2026 published rates by surface and job, the labor, fuel and overhead behind each quote, and a priced house wash.
Pressure washing prices are set by the square foot for flatwork and siding, by the job for houses, decks and roofs, and by the hour or visit for commercial work. Taskrabbit's November 2026 data puts the typical rate at $0.08 to $0.50 per square foot, and an operator's own price comes from crew hours, fuel, chemicals, drive time and overhead.
Two pricing errors recur in this trade, and both are arithmetic rather than marketing. A per-square-foot rate copied from a competitor leaves out the drive, the set-up and the second worker; a house wash and a driveway quoted separately for the same visit charge the customer twice for one trip. This guide belongs to the pricing and quoting guides from FieldRanger, the maker of power washing software that runs inside HubSpot. It starts with the published rates, then the per-square-foot and per-hour units, the sourced cost inputs, a priced residential job, roof and apartment complex pricing, and minimum charges and add-ons. A quote checklist and the estimating software come last.
Three terms recur. Flatwork is horizontal concrete or pavers: driveways, patios, walkways and pool decks, cleaned with a rotary surface cleaner. A house wash cleans vertical siding, on vinyl and painted surfaces by soft washing, which applies a cleaning solution at low pressure and lets the chemistry do the work. Production rate is the square footage a crew cleans per hour on a given surface, measured by the operator on its own jobs; it is the number that converts a cost per hour into a price per square foot.
Pressure washing prices published for 2026
Two sources publish national rates with a stated date. Taskrabbit reports figures from its own platform; Homewyse builds a unit-cost estimate from labor, supplies and an equipment rental allowance.
| Item | Published range | Source |
|---|---|---|
| Typical rate, all surfaces | $0.08 to $0.50 per square foot | Taskrabbit, updated November 1, 2026 |
| Vinyl siding | $0.30 to $0.40 per square foot | Taskrabbit |
| Brick / stucco | $0.31 to $0.37 / $0.33 to $0.45 per square foot | Taskrabbit |
| Wood decks or fences / composite decks | $0.35 to $0.50 / $0.50 to $2.00 per square foot | Taskrabbit |
| Siding, house wash | $300 to $600 per job | Taskrabbit |
| Driveway | $180 to $240 per job | Taskrabbit |
| Deck / fence | $100 to $200 / $125 to $235 per job | Taskrabbit |
| Roof washing | $450 to $700 per job | Taskrabbit |
| Average Tasker rate | $52 an hour; $35 to $65 in most states with data | Taskrabbit |
| Unit-cost estimate | $0.42 to $0.52 per square foot, January 2026 | Homewyse |
Sources: Taskrabbit, pressure washing cost; Homewyse, cost to pressure wash per square foot.
The two sources measure different things. Taskrabbit's rates are what its customers paid individual Taskers, who may bring no truck or commercial insurance. Homewyse includes labor, supplies, set-up and a daily rental allowance for a 3,000 PSI, 4 GPM washer, with a two-hour labor minimum, and it excludes contractor markup of 13% to 22%. An insured company with its own rig prices from its own costs and uses these ranges as a market check.
Pressure washing prices per square foot
A price per square foot is a cost per hour divided by a production rate. In illustrative figures, a crew whose full cost is $90 an hour and which cleans 900 square feet of driveway an hour has a cost of $0.10 a square foot before margin; the same crew cleaning 300 square feet of painted fence an hour has a cost of $0.30. The surface sets the production rate, and that is the reason the published per-square-foot ranges differ by surface.
The production rate belongs to the operator. A surface cleaner, a wand and a soft wash pump each clean at a different speed, and heavy staining, oil spots and algae slow all three. Timing the first ten jobs of each surface type, square footage against minutes on site, gives a rate the price list can rely on; a rate borrowed from a forum does not.
Pressure washing prices per hour
Hourly pricing suits commercial work, unknown conditions and jobs that cannot be measured in advance. The rate is the crew's full cost per hour divided by one minus the target margin, and it must carry drive time and set-up, which the hourly count on site does not include.
Taskrabbit's city data shows the spread in hourly rates for individual workers: $50 an hour in Austin, $59 in Chicago, $70 in Denver and $74 in New York City, with average invoice totals of $181, $200, $250 and $321 in the same cities (Taskrabbit, updated November 1, 2026). Those are rates for one person. A two-person crew with a truck, a commercial rig and insurance has a cost per hour above them before any margin, as the sample job below shows.
Cost inputs for a pressure washing price
Each input below has a federal or manufacturer source; the job measurements in the next section are sample figures.
Labor starts from a wage. The Bureau of Labor Statistics publishes no pressure washing occupation; the closest is cleaners of vehicles and equipment, whose median wage was $35,830 a year in May 2025 (BLS Occupational Outlook Handbook, hand laborers and material movers, page modified August 27, 2026). At 2,080 hours that is $17.23 an hour. Wages are 70.0% of total employer compensation cost in private industry (BLS Employer Costs for Employee Compensation, June 2026, released September 9, 2026), so the loaded cost is $24.61 an hour.
Fuel follows the engine. Honda lists the GX390, the engine on the 4,200 PSI washer priced in the business guide below, at 3.5 liters an hour at continuous rated power and 3,600 rpm (Honda, GX390 specifications, checked November 12, 2026), or 0.92 gallons an hour. Regular gasoline averaged $3.995 a gallon in the week of November 9, 2026 (EIA, gasoline and diesel fuel update, released November 10, 2026). The truck uses the IRS business standard mileage rate of 76 cents a mile from July 1, 2026 (IRS standard mileage rates, updated July 28, 2026).
Overhead comes from the first-year budget. The guide to starting a pressure washing business costs insurance and permits at $27.15 a job and the washer at $12.97 a job for a 150-job first year, $40.12 a job in total. A business with a different job count recalculates the share from its own pressure washing business plan template.
Residential pressure washing prices: a priced house wash and driveway
The job is a two-story vinyl house with 2,200 square feet of siding and an 800-square-foot driveway, 20 feet by 40, cleaned in one visit by two workers in 3.0 hours on site, with a 24-mile round trip taking 0.6 hours. The washer runs for 2.5 of those hours. The areas, times and chemical cost are sample figures; the rates are the sourced ones above.
| Line | Calculation | Amount |
|---|---|---|
| Labor on site and driving | 2 workers × 3.6 hours × $24.61 | $177.19 |
| Washer fuel | 2.5 hours × 0.92 gallons × $3.995 | $9.23 |
| Soft wash solution and surfactant | Sample cost | $18.00 |
| Truck | 24 miles × $0.76 | $18.24 |
| Insurance, permits and washer share | From the 150-job first-year budget | $40.12 |
| Full cost of the job | Sum of the five lines | $262.78 |
| Price at a 40% margin | $262.78 ÷ 0.60 | $437.97 |
| Price per square foot | $437.97 ÷ 3,000 square feet | $0.15 |
| Price per crew hour on site | $437.97 ÷ 3.0 hours | $145.99 |
Two findings come out of the table. Labor is 67% of the cost, so the production rate, not the chemical, decides the price. The built price for both services, $437.97, sits below the sum of Taskrabbit's separate ranges, $300 to $600 for siding and $180 to $240 for a driveway, because one visit carries one drive, one set-up and one overhead share. At a 50% margin the same job prices at $525.56, inside the combined range. Bundling the driveway into the house wash is where the margin is, and pricing them as two jobs hands that margin back or loses the sale.
The house pressure washing prices guide applies the same build to house washes by size and story.
Roof pressure washing prices and soft washing
A roof is priced as a soft wash, not as a pressure wash. The Asphalt Roofing Manufacturers Association states: "Never use a pressure washer to clean an asphalt shingle roof," and recommends a bleach and water solution applied with a sprayer and rinsed at low pressure (ARMA, February 22, 2012). Searches for roof pressure washing prices therefore describe a service the shingle makers advise against, and the quote should name the method.
Taskrabbit lists roof washing at $450 to $700 a job and asphalt shingles at $0.50 to $1.00 per square foot (Taskrabbit, updated November 1, 2026). The cost build adds three lines a house wash does not carry: roof access and fall protection time, more solution per square foot, and plant protection below the eaves. The chemistry can also bring a state pesticide question, which the pressure washing business guide covers.
Pressure washing apartment complex pricing
Apartment and multi-building work is priced by the building, the breezeway or the visit, on a schedule. The buyer is a property manager who compares bids per building, asks for a certificate of insurance and may require work before residents leave for the day. Wash water rules weigh more here: large paved areas send large volumes toward storm drains, and cities such as Portland and Fort Worth require capture or discharge permits, as the business guide sets out.
The cost build is the same, with a measured production rate for breezeways, stairwells and parking areas, and with the visit frequency written into the agreement. A recurring contract lowers the price per visit because the walkthrough, the access arrangements and the bid are paid for once. The guide to commercial pressure washing prices covers storefronts, fleets and parking decks.
Minimum charges, add-ons and seasonal rates
A minimum charge covers the visit before any square foot is cleaned: loading the rig, the drive, set-up and breakdown. Homewyse builds a two-hour labor minimum into its unit-cost estimate for the same reason. In the sample job, drive time alone is 0.6 crew hours, $29.53 of labor before the washer starts.
Add-ons are priced as their own lines: oil stain treatment, gum removal, sealing after cleaning, gutter brightening and rust removal. Each has its own chemical cost and production rate, and a separate line keeps the base price comparable with the published ranges. Seasonal rates follow demand: where residential bookings fall in the off-season, a lower rate on recurring commercial visits keeps crews working.
Pressure washing quote checklist
- Measure each surface in square feet and note its material and condition.
- Apply the business's own production rate for each surface to get hours on site.
- Add drive time and set-up, with two workers wherever the job needs them.
- Load the wage: hourly wage ÷ 0.700 for payroll taxes and benefits.
- Add washer fuel from engine hours, solution cost, the truck at the IRS rate and the overhead share per job.
- Divide the full cost by one minus the target margin, and apply the minimum charge.
- Convert the result to a price per square foot and a price per crew hour, and compare both with the published ranges.
- Test the price list against finished jobs each month: measured square feet per hour should match the production rates it assumes.
Estimates, invoices and margin reports in FieldRanger
A price list only holds if the estimate uses it and the job records show whether it held. In FieldRanger, an estimate is built from the HubSpot deal or contact record, or in FieldRanger and kept tied to the deal, and PandaDoc sends it for signature; the estimating page shows the estimate builder. A won deal becomes a job with its context carried over, and recurring job templates hold commercial visits on a schedule.
In the field, technicians clock in and out with time logged against each job, which supplies the measured hours for step 8 of the checklist. FieldRanger builds each technician's route for the day automatically, the invoice is generated from the completed work order, and payment can be taken in the field through Stripe, with invoices and payments syncing to QuickBooks. Revenue reports show job revenue and margin by customer or service type, so a house wash priced below cost shows up by service line. Plan prices are on the pricing page, and Start free trial gives 14 days with no card required.
Frequently asked questions
How much to charge for pressure washing?
Build the price from cost: crew hours on site and driving at a loaded wage, washer fuel, solution, the truck at the IRS mileage rate and an overhead share, divided by one minus the target margin. The sample house wash and driveway in this guide cost $262.78 and priced at $437.97 at a 40% margin.
What are pressure washing prices per square foot?
Taskrabbit's November 2026 data puts the typical rate at $0.08 to $0.50 per square foot, with vinyl siding at $0.30 to $0.40 and composite decks at $0.50 to $2.00. Homewyse's January 2026 unit-cost estimate is $0.42 to $0.52.
What are pressure washing prices per hour?
Taskrabbit reports an average rate of $52 an hour for individual Taskers, from $50 in Austin to $74 in New York City. A two-person crew with a commercial rig prices higher: the sample job in this guide works out at $145.99 per crew hour on site.
How much does it cost to pressure wash a house?
Taskrabbit lists a siding house wash at $300 to $600. The price rises with siding area, stories, material and condition, and a driveway cleaned on the same visit adds less than its separate price because the drive and set-up are already paid for.
How much does roof pressure washing cost?
Taskrabbit lists roof washing at $450 to $700 a job and asphalt shingles at $0.50 to $1.00 a square foot. The Asphalt Roofing Manufacturers Association advises never pressure washing an asphalt shingle roof, so the service is priced and performed as a soft wash.
How is apartment complex pressure washing priced?
By the building, breezeway or visit, on a recurring schedule written into the agreement. The cost build uses measured production rates for breezeways and paving, after-hours timing where required, wash water capture where the city requires it, and the insurance certificate the property manager asks for.
Priced as two jobs, a house wash and a driveway carry two drives and two set-ups; priced as one visit at $437.97, they carry one, and the difference stays with the operator.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo