Guide
How Much Does It Cost to Start an HVAC Business:Nevada License Fees, EPA 608, Van, Tools, Insurance and a Sample Budget
How much does it cost to start an HVAC business: Nevada C-21 license fees and bond, EPA 608, a service van, refrigerant tools, insurance and a sample budget.
How much does it cost to start an HVAC business: in Nevada, an owner-operator with one new van needs about $73,300 at prices published on November 12, 2026. A new cargo van accounts for $61,499 of that. License fees, a bond premium, a refrigerant tool kit and the first year of insurance make up the remaining $11,800.
A start-up budget built from round numbers fails at the first purchase order. The license board asks for a bond whose size it sets itself, the insurer asks for payroll the owner has not yet decided, the van costs more than its sticker, and the tool kit an owner priced last spring is sold out. FieldRanger builds HVAC software for companies that run on HubSpot. This guide prices each start-up line from a named source: Nevada's contractor license fees and bond range, EPA Section 608 certification, a van from a public purchase, a refrigerant tool kit, and first-year insurance premiums. It then assembles them into a sample budget, shows the lines that move it, and closes with a checklist.
Three terms recur. A license bond is a surety bond the state requires before it issues a contractor's license; the business pays a premium for it, and the bond amount is what a harmed customer can claim. A classification is the scope of work a contractor's license allows. A premium is the annual price of an insurance policy, as distinct from its limit.
How much to start an HVAC business: costs by category
The table sets each category against its source. Every figure was read on the source's own page or document on November 12, 2026; lines without a published price are marked and left out of the totals.
| Category | Figure | Source |
|---|---|---|
| Contractor license application and issue fees | $900 | Nevada State Contractors' Board fees, NAC 624.130 |
| License bond amount | $1,000 to $500,000, set by the Board | NRS 624.270 |
| License bond premium | $112 a year, median | Insureon, HVAC installation |
| EPA 608 reference manual | $57 | Mainstream Engineering store |
| EPA 608 proctored exam | Not published on the pages read | Certifying organization |
| New cargo van | $61,499 plus taxes and fees | City of Little Rock award, June 2, 2026 |
| Refrigerant tool kit | $6,010.99 listed | TruTech Tools |
| First-year insurance, no employees | $4,734 | NEXT Insurance and Insureon |
The van is 84 percent of the sample total. Every other decision in this guide moves the budget by hundreds or a few thousand dollars; the van decision moves it by tens of thousands.
Nevada C-21 contractor license fees, bond and financial requirements
Nevada licenses heating and cooling work under classification C-21, refrigeration and air-conditioning. Its subclassification C-21b covers "the installation, repair, service and maintenance of equipment, devices, machinery, units and related ductwork which use evaporation, refrigeration, boilers or combustion for the control of air temperatures in structures" (NAC 624.380, revised June 7, 2026). A narrower subclassification, C-21d maintenance, covers repair and replacement of parts in existing systems but not the replacement of complete condenser assemblies on remote systems or air handlers.
The Board's fees are set in regulation. NAC 624.130 lists $300 "to consider an application for the issuance of a license for a classification in which the applicant is not licensed" and $600 "to issue or renew a license" (NAC 624.130). A first license therefore costs $900 in Board fees, before examination fees, which are not included here.
The bond is sized by the Board. Before issuing a license the Board requires a surety bond or a cash deposit, in an amount "not less than $1,000 or more than $500,000", set from the applicant's financial and professional responsibility and the magnitude of its operations (NRS 624.270, revised April 15, 2026). The premium on a small bond is a fraction of its face value; Insureon reports a median surety bond premium of $112 a year for installation businesses including HVAC contractors (Insureon, updated August 24, 2026). A cash deposit ties up the full amount instead, and NAC 624.130 adds a $200 administrative fee where the applicant has established a cash deposit with the Board.
Two further conditions bear on cost. The Board requires an applicant to show financial responsibility, with proof of financial solvency, under NRS 624.260 and 624.262 (NRS chapter 624). Before granting a license, the Board also requires proof of industrial insurance covering the applicant's employees, or a signed affidavit from an applicant with no employees who does not subcontract (NRS 624.256). An owner-operator files the affidavit and buys workers' compensation with the first hire.
EPA Section 608 certification costs and types
Refrigerant work needs a federal certification before the first service call. EPA requires certification for technicians who maintain, service, repair or dispose of equipment that could release refrigerants, and divides it into Type I for small appliances, Type II for high- and very high-pressure appliances, Type III for low-pressure appliances, and Universal for all three (EPA, Section 608 technician certification requirements, updated July 15, 2026). The credentials "do not expire", tests "must be administered by an EPA-approved certifying organization", and the core test must be taken proctored to attain Universal certification.
Type I covers small appliances only, so a technician servicing larger systems needs Type II, Type III or Universal. Mainstream Engineering, which runs EPATest.com, lists its open-book Type I exam at $24.95 for the first attempt and states that Type II, III or Universal requires the core section as a closed-book proctored exam (EPATest.com, exam procedures and rules); its store lists the English Universal reference manual at $57 (EPATest.com store, checked November 12, 2026). Neither page publishes the proctored exam fee, so the sample includes the manual and leaves the exam fee out.
Service van purchase price from a public award
A public purchase is a price paid, recorded with the bid behind it. On June 2, 2026, the City of Little Rock's Board of Directors authorized a contract with Mark McLarty Ford "in the amount of Sixty-One Thousand, Four Hundred Ninety-Nine Dollars ($61,499.00), plus applicable taxes" for one 2026 Ford Transit-350 cargo van, the lowest of two responsive bids under Bid No. 228351 (City of Little Rock, resolution).
That van went to a police tactical unit, so the price is a reference for a new full-size cargo van rather than a quote for a shelved HVAC service van. Shelving, a ladder rack, lettering and Nevada sales tax and registration are additional. A used van, a lease or a van financed over five years changes the cash needed at start-up, and none of those prices is published in a comparable form, so the sample shows the budget with the new van and without it.
Refrigerant tools and the evacuation kit
The tools that separate HVAC work from general handyman work are the refrigerant set: recovery machine, vacuum pump, micron gauge, digital manifold, refrigerant scale, leak detector and the hoses and cylinder that connect them. TruTech Tools lists "The Complete Fieldpiece Advanced HVAC Kit" at $6,010.99, against an MSRP of $6,072.02, with twelve line items: a Fieldpiece VPX7 10 CFM vacuum pump, MR45 recovery machine, MG44 wireless vacuum gauge, SM482V digital manifold, SC680 clamp meter, DR82 infrared leak detector, SR47 refrigerant scale, two Job Link probe kits, an AccuTools evacuation hose kit, hoses and charging tees (TruTech Tools, checked November 12, 2026). The same page marks the kit as no longer available, so the figure is a listed price for a defined kit rather than an order that can be placed today.
The kit omits what every trade van carries: hand and power tools, a brazing outfit, ladders, a recovery cylinder beyond the first and personal protective equipment. Those vary with the work an owner plans to take, and a first-year van stock of capacitors, contactors, motors and filters is set by the service mix. The tasks on an HVAC maintenance checklist are a reasonable way to test that the kit and the van stock cover a standard visit.
HVAC insurance premiums for a new company
Insurance is the one recurring cost large enough to sit beside the fixed start-up purchases. NEXT Insurance reports, for its HVAC customers, general liability at $76 a month on average for 79% of customers, with most between $53 and $196, at limits from $300,000 to $1 million per occurrence; workers' compensation at a median of $119 a month; and tools and equipment at $32 a month on average (NEXT Insurance, HVAC insurance cost, premium data as of April 1, 2026). NEXT publishes no commercial auto figure on that page; Insureon reports a median of $3,438 a year for HVAC installation companies (Insureon, updated August 24, 2026).
| Policy | Annual figure | Basis |
|---|---|---|
| General liability | $912 | NEXT average, $76 × 12 |
| Commercial auto, one van | $3,438 | Insureon median |
| Tools and equipment | $384 | NEXT average, $32 × 12 |
| Workers' compensation | $0 until the first employee; $1,428 after | NEXT median, $119 × 12 |
| Total without employees | $4,734 |
The general liability average covers a range of limits, and a commercial customer who requires $1 million per occurrence will be quoted at that limit. Coverage types, state minimums and the exposures specific to refrigerant and completed installs are covered in the guide to HVAC contractor insurance.
Sample start-up budget for a Nevada owner-operator
The sample is a hypothetical owner-operator opening a C-21 company in Nevada with no employees and one van. Every figure is from the sources above; nothing is estimated, and the lines without a published price are listed below the table as exclusions.
| Line | With a new van | Without a van purchase |
|---|---|---|
| Board fees: application and license | $900.00 | $900.00 |
| License bond premium | $112.00 | $112.00 |
| EPA 608 Universal reference manual | $57.00 | $57.00 |
| New cargo van | $61,499.00 | Not purchased |
| Refrigerant tool kit | $6,010.99 | $6,010.99 |
| First-year insurance, no employees | $4,734.00 | $4,734.00 |
| Total | $73,312.99 | $11,813.99 |
| Total after a first employee's workers' compensation | $74,740.99 | $13,241.99 |
Excluded from both columns: the EPA proctored exam fee, the license examination fees, sales tax and registration on the van, shelving and lettering, hand tools, parts stock, business registration fees, and the working capital that carries the company until customers pay. Each of those belongs in the owner's own budget at the price actually quoted. The steps behind the budget, from certification to registration, are set out in how to start an HVAC business, and the HVAC business plan guide shows how a lender reads the same lines.
Variables in the start-up budget
Four decisions move the sample by more than its smaller lines combined.
- The van. Buying used, leasing or financing replaces a $61,499 outlay with a smaller deposit and a monthly payment, which moves cost from start-up into the first year's operating budget.
- The first hire. A technician adds wages, the $1,428 workers' compensation median and the payroll the insurer prices it on, and in Nevada the affidavit is replaced by proof of coverage.
- The bond. The Board sets the amount from the applicant's finances and operations, so a larger planned volume can mean a larger bond, or a cash deposit that ties up the full amount.
- The insurance limits. A commercial maintenance contract that requires $1 million per occurrence, or an umbrella above it, raises the liability line above the average.
Growth decisions after the first season, such as a second van or a maintenance agreement program, are covered in how to grow HVAC business.
Starting an HVAC business: checklist before the first call
- Confirm the classification needed, C-21 or a narrower subclassification, against the work planned.
- Hold EPA Section 608 Type II or Universal certification before touching a refrigerant circuit.
- Apply to the Board, pay the $300 application and $600 license fees, and budget for the bond amount the Board sets.
- File the no-employee affidavit, or buy workers' compensation before the first hire.
- Price the van three ways, new, used and leased, and record the cash each needs at start-up.
- Price the refrigerant kit item by item at a supplier that has it in stock.
- Quote general liability, commercial auto and tools coverage at the limits the first commercial customer will require.
- Verify the budget: every line has a quote or a published price dated within the month, and the exclusions are priced or deliberately carried as working capital.
Estimates, jobs and invoices in FieldRanger from the first call
A new HVAC company's first records are its first estimates. In FieldRanger an estimate can be built from the HubSpot deal or contact record, or in FieldRanger and tied to the deal, as described on the estimating software page, and estimates and agreements can go out for signature through PandaDoc. A won deal becomes a job with its context carried over, the job goes on a drag-and-drop calendar, and recurring job templates hold maintenance agreements and their visits. Clock-ins and clock-outs log time against each job, the invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Revenue reports show job revenue and margin by customer or service type, which is how the start-up budget is checked against the first year's work. Each plan is listed on pricing, with a 14-day Start free trial that needs no card.
Frequently asked questions
How much does it cost to start an HVAC business?
In the Nevada sample built from prices published on November 12, 2026, about $73,300 with a new cargo van and about $11,800 without one. The van is $61,499; Board fees, a bond premium, an EPA 608 manual, a refrigerant tool kit and first-year insurance make up the rest.
How much to start an HVAC business without buying a van?
About $11,800 in the sample: $900 in Nevada Board fees, a $112 bond premium, a $57 EPA 608 manual, a $6,010.99 refrigerant tool kit and $4,734 of first-year insurance, before exam fees, hand tools, parts stock and working capital.
How much does a Nevada HVAC contractor license cost?
NAC 624.130 sets $300 to consider an application for a classification the applicant does not hold and $600 to issue or renew a license. The Board also sets a bond or cash deposit between $1,000 and $500,000, and examination fees are paid separately.
How much does EPA 608 certification cost?
The fee depends on the certifying organization and the type. Mainstream Engineering lists its open-book Type I exam at $24.95 for the first attempt and its Universal reference manual at $57; Type II and Universal require a proctored core exam, whose fee its pages do not publish.
What is the largest cost of starting an HVAC business?
The service van. A 2026 Ford Transit-350 cargo van cost the City of Little Rock $61,499 plus taxes in June 2026, which is 84 percent of the sample budget.
Does an HVAC business need workers' compensation from the start?
In Nevada, an applicant with no employees who does not subcontract may file an affidavit instead of proof of industrial insurance. The first employee brings the requirement, and NEXT Insurance reports a median HVAC workers' compensation premium of $119 a month.
The Nevada sample opens for $11,813.99 with a van already in the driveway and for $73,312.99 without one, so the first quote an HVAC owner collects is the one with wheels on it. The visits, agreements and invoices after that purchase run on HubSpot records through HVAC software.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo