Guide
How Much to Charge for Pressure Washing a Driveway:Price per Square Foot, Hourly Rate, Sidewalks, Stain Treatment and Sealing
How much to charge for pressure washing a driveway: published prices, a price per square foot built from cost, sidewalks, oil stain treatment and sealing.
How much to charge for pressure washing a driveway depends on two costs: a fixed cost for the visit and a cost for each square foot the surface cleaner covers. In this guide's sample, a two-car concrete driveway with its front walk and sidewalk, 1,214 square feet in all, prices at $220, or 18 cents a square foot.
Driveway quotes go wrong in two directions. A published per-square-foot rate built on a small driveway has a minimum charge folded into it, and applied to a large driveway it overprices the job. A rate taken from a large job, applied to a small one, loses the drive and the set-up. This guide is one of the pricing and quoting guides from FieldRanger, which makes power washing software that runs inside HubSpot. It reads three published driveway prices, then sets out flatwork measurement, the price per square foot, the hourly rate and sidewalk pricing. Oil stain treatment and sealing are priced as add-ons, and a costed driveway quote, a checklist and the software record follow.
Three measurements decide the price. Flatwork area is the horizontal concrete or paver surface in square feet, measured as rectangles. Cleaning rate is the square footage the operator's surface cleaner finishes in an hour, edges and rinse included, timed on the operator's own jobs. Visit cost is everything a job costs before the first square foot is cleaned: the drive, set-up, pack-up and the job's share of insurance and equipment. House washes, roofs and apartment work are priced in the guide to pressure washing prices; this page covers flatwork.
Driveway pressure washing prices on three published pages
Three sources publish driveway figures with a date, and each measures something different.
| Source | Published figure | What it measures |
|---|---|---|
| Thumbtack, updated June 4, 2026 | $220 to $473 national average; $128 low end, $844 high end | Prices paid for driveway jobs on the platform |
| Taskrabbit, updated November 1, 2026 | $180 to $240 per driveway; patios and walkways $50 to $75; $52 an hour on average | Prices paid to individual Taskers |
| Homewyse, January 2026 | $0.42 to $0.52 per square foot, for a 534-square-foot example | A unit-cost estimate with a rented 3,000 psi, 4 gpm washer and a two-hour labor minimum |
Sources: Thumbtack, cost to pressure wash a driveway; Taskrabbit, pressure washing cost guide; Homewyse, cost to pressure wash a driveway. Homewyse excludes general contractor markup of 13 to 22 percent and sales tax.
The Homewyse figure shows how a minimum hides inside a per-square-foot rate. Applied to its own 534-square-foot example, $0.42 to $0.52 gives $224 to $278, close to Thumbtack's low end. Applied to an 864-square-foot two-car driveway, the same rate gives $363 to $449, and to the sample's 1,214 square feet it gives $510 to $631. The two-hour labor minimum is spread over 534 square feet, so the rate is a small-driveway rate, and the price per square foot of a larger driveway has to come from a cost build.
Driveway measurement and flatwork area
A driveway is measured as rectangles, each length times width, and the rectangles are added together. The apron at the street, a parking pad beside the garage and the turn into a side-entry garage are separate rectangles. Walks and the public sidewalk are measured the same way and listed as their own lines, because a customer may take the driveway and decline the sidewalk.
The sample job is a broom-finished concrete driveway of 24 by 36 feet, 864 square feet, with a front walk of 4 by 25 feet, 100 square feet, and 50 feet of public sidewalk 5 feet wide, 250 square feet. Those dimensions are sample figures; a measuring wheel or a satellite-image measurement checked on site replaces them for a real quote. Photographs of oil stains, rust marks and gum taken at measurement go on the quote, because each is priced as its own line below.
Price per square foot for flatwork
A price per square foot has two parts: the visit cost divided by the area, and the cost of cleaning each square foot. The first part falls as the driveway grows; the second does not. The inputs below are published rates and sample quantities.
Labor is one technician at the national median wage for cleaners of vehicles and equipment, $17.23 an hour in BLS 2025 data (O*NET OnLine, national wages, site updated October 6, 2026). Wages were 70.0 percent of employer compensation cost in private industry in June 2026 (BLS Employer Costs for Employee Compensation, Table 4, modified September 9, 2026), so the loaded rate is $17.23 ÷ 0.700 = $24.61 an hour. The washer's Honda GX390 engine burns 3.5 liters an hour at continuous rated output (Honda, GX390 specifications, checked November 12, 2026), or 0.92 gallons, and regular gasoline averaged $3.995 a gallon in the week of November 9, 2026 (EIA, gasoline and diesel fuel update, released November 10, 2026). An engine hour costs 0.92 × $3.995 = $3.68 in fuel.
The visit cost in the sample is $61.94: one hour of travel, set-up and pack-up at $24.61, a 20-mile round trip at the IRS rate of 76 cents a mile, $15.20 (IRS standard mileage rates, updated July 28, 2026), $10.13 of insurance and equipment and $12.00 of office, phone and marketing. The insurance share uses NEXT's average pressure washing premiums of $75 a month for general liability and $30 a month for tools and equipment (NEXT Insurance, pressure washing insurance cost, data updated October 2026); with the entry rig costed in startup costs for a pressure washing business written off over three years, the two come to $2,532.97 a year, spread over 250 sample jobs. Cleaning costs $24.61 of labor and $3.68 of fuel per hour, and at a sample cleaning rate of 1,000 square feet an hour that is $0.02829 a square foot.
| Flatwork area | Cleaning hours | Full cost: $61.94 + area × $0.02829 | Price | Price per square foot |
|---|---|---|---|---|
| 400 sq ft | 0.40 | $73.26 | $146.51 | $0.37 |
| 864 sq ft | 0.86 | $86.38 | $172.77 | $0.20 |
| 1,214 sq ft | 1.21 | $96.28 | $192.57 | $0.16 |
| 2,000 sq ft | 2.00 | $118.52 | $237.04 | $0.12 |
| 3,000 sq ft | 3.00 | $146.81 | $293.62 | $0.10 |
The price per square foot falls from 37 cents to 10 cents across the table while the price per visit doubles. A single per-square-foot rate can only be right for one size of job, so a price list for flatwork states a visit charge and a rate per square foot, or a rate for each size band. The 50 percent margin is the owner's choice and carries the business's profit and its unpaid time.
Pressure washing price per hour
An hourly rate suits flatwork that cannot be measured in advance: a job with unknown staining, a commercial lot cleaned around parked cars, or a customer who wants work done until a budget runs out. The rate is the cost of a paid hour divided by one minus the margin.
In the sample, a paid hour costs $24.61 of labor, $3.68 of fuel and $9.00 of insurance, equipment and office cost, which is the $5,532.97 annual total for those three lines spread over 250 jobs of 2.46 paid hours. The hour costs $37.29 and prices at $74.58 at a 50 percent margin, with the truck charged per trip on top. Taskrabbit's $52 average is a rate for an individual Tasker; the sample's rate is higher because it carries a commercial rig, insurance and a margin. An hourly job still carries the visit cost, so the quote states a minimum number of hours.
Sidewalk pressure washing price
A sidewalk is priced as flatwork on the same visit and as its own job when sold alone, and the two prices differ by a factor of ten. The sample's 50 feet of public sidewalk, 5 feet wide, is 250 square feet. Added to the driveway visit, it costs 250 × $0.02829 = $7.07 to clean and prices at $14.14, or 28 cents a linear foot. Sold alone, it carries the full visit cost: ($61.94 + $7.07) ÷ 0.50 = $138.02, or $2.76 a linear foot.
The minimum charge follows from the visit cost: $61.94 ÷ 0.50 = $123.88, rounded to $125. Homewyse builds a two-hour labor minimum into its estimate for the same reason. A sidewalk, a small patio or a single walkway sold on its own carries the whole visit cost and never prices below the minimum, and the quote for a driveway offers the walks at their add-on price on the same visit.
Oil stain, rust and gum treatment pricing
Stains are priced per stain, so that two driveways of the same area, one with eight stains and one with none, carry different prices. Taskrabbit notes that driveways may require pre-treatment for oil stains. Each degreaser, rust remover and gum treatment has its own label dilution and dwell time, and the chemical cost per stain comes from the product the operator uses.
In the sample, an oil stain takes $2.00 of degreaser, a sample figure, and five minutes of labor, $2.05, for a cost of $4.05 and a price of $8.10 at a 50 percent margin, quoted at $10 a stain. A stain the treatment does not lift is recorded with a before-and-after photograph and stated on the invoice as treated, not removed, so that the customer is not told to expect a clean slab where the oil has soaked in.
Concrete sealing after pressure washing
Sealing is a second visit, not a longer first one. Ghostshield's instructions for its Siloxa-Tek 8500 sealer state: "It is recommended to wait at least 24-48 hours after rain and pressure washing before sealing." The same page lists coverage of 150 to 400 square feet per gallon for one coat and states that treated surfaces are ready for vehicle traffic within 24 hours (Ghostshield, Siloxa-Tek 8500, checked November 12, 2026).
Material is the largest cost of the sealing visit. Proline's Dura Eco-Seal concrete sealer lists at $467.50 for a 5-gallon bucket, $93.50 a gallon, with coverage of 200 to 400 square feet per gallon (Kuhlman, Proline Dura Eco-Seal 5-gallon, checked November 12, 2026).
| Line | At 300 sq ft per gallon | At 200 sq ft per gallon |
|---|---|---|
| Sealer | 2.88 gallons × $93.50 = $269.28 | 4.32 gallons × $93.50 = $403.92 |
| Labor, 0.5 hours travel and 1.5 hours applying | $49.22 | $49.22 |
| Truck, 20 miles × $0.76 | $15.20 | $15.20 |
| Insurance, equipment and office share | $22.13 | $22.13 |
| Full cost | $355.83 | $490.47 |
| Price | $593.05 | $817.45 |
| Price per square foot | $0.69 | $0.95 |
Sealer is 76 percent of the cost at the midpoint coverage, so the sample prices sealing at a 40 percent margin rather than the 50 percent used for cleaning. The coverage range alone moves the price by $224.40, so the quote states the coverage assumed and the operator tests a patch on a porous or weathered slab before committing to a price. A 5-gallon bucket opened for this driveway leaves 2.12 gallons at the midpoint coverage, which belongs to the next sealing job rather than to this customer's invoice.
Sample driveway quote: two-car driveway, front walk and sidewalk
The sample job puts the pieces together: the 864-square-foot driveway, the 100-square-foot front walk and the 250-square-foot sidewalk, three oil stains and no sealing. The quantities and the margin are sample inputs; the rates are the published ones above.
| Line | Calculation | Amount |
|---|---|---|
| Travel, set-up and pack-up | 1.0 hour × $24.61 | $24.61 |
| Truck | 20 miles × $0.76 | $15.20 |
| Insurance and equipment share | $2,532.97 ÷ 250 jobs | $10.13 |
| Office, phone and marketing | Sample | $12.00 |
| Cleaning | 1,214 sq ft ÷ 1,000 sq ft per hour = 1.21 hours × ($24.61 + $3.68) | $34.23 |
| Oil stain treatment | 3 stains × ($2.00 + $2.05) | $12.15 |
| Full cost | Sum of the lines | $108.32 |
| Price at a 50% margin | $108.32 ÷ 0.50 | $216.64 |
| Quoted price | Rounded | $220 |
At $220 the job earns 18 cents a square foot and $112.24 per on-site hour across its 1.96 hours on site. The price sits at Thumbtack's national low end and inside Taskrabbit's $180 to $240 for a driveway alone, while covering a walk and a sidewalk as well. Offered with sealing at $595 on a second visit, the same customer's total is $815, and the sealer, not the washing, is the larger part of it.
Driveway quote checklist
- Measure each rectangle of driveway, apron, walk and sidewalk, and list each area as its own line.
- Photograph and count oil stains, rust marks and gum before quoting.
- Calculate the visit cost from travel, set-up, truck mileage, insurance, equipment and office cost.
- Add cleaning cost per square foot from the business's own cleaning rate, labor rate and engine fuel.
- Divide by one minus the target margin, and apply the minimum charge to any area sold alone.
- Price stains per stain and sealing as a separate visit, with the sealer coverage stated on the quote.
- Compare the result with at least two dated published prices for the same job size.
- After the job, compare the recorded on-site minutes with the quoted cleaning hours, and correct the cleaning rate when the two differ.
Driveway estimates and job records in FieldRanger
FieldRanger keeps the measurements, the quote and the job on the customer's HubSpot records. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and kept tied to the deal, with each area, the stain count and the sealing visit as separate lines; estimating shows the estimate builder. Estimates and agreements can be sent for signature through PandaDoc, and a won deal becomes a job with its context carried over.
Technicians clock in and out with time logged against each job, which supplies the on-site minutes that step 8 of the checklist compares with the quote. A sealing visit is scheduled on the drag-and-drop calendar at least two days after the wash. The invoice is generated from the completed work order, payment can be taken in the field through Stripe, and revenue reports show job revenue and margin by service type, so washing and sealing can be compared on margin. The yearly figures behind the visit cost, from insurance to the job count, belong in a pressure washing business plan template, and the policies behind the insurance share are priced in how much is insurance for a pressure washing business.
Frequently asked questions
How much to charge for pressure washing a driveway?
Build the price from a visit cost plus a cost per square foot, then apply a margin. The sample two-car driveway, front walk and sidewalk, 1,214 square feet with three oil stains, cost $108.32 and was quoted at $220. Thumbtack's national average for driveways is $220 to $473, updated June 4, 2026.
How much to charge for pressure washing per square foot?
Enough to cover the visit cost spread over the area plus the cleaning cost of each square foot. In the sample, that is 37 cents a square foot for 400 square feet and 10 cents for 3,000, at a 50% margin. Homewyse's January 2026 estimate of $0.42 to $0.52 includes a two-hour labor minimum.
How much to charge for pressure washing per hour?
The cost of a paid hour divided by one minus the margin, with the truck charged per trip. In the sample, an hour costs $37.29 and prices at $74.58. Taskrabbit's national average for individual Taskers is $52 an hour, updated November 1, 2026.
How much to charge for pressure washing a sidewalk?
On the same visit as a driveway, the sample's 50-foot sidewalk adds $14.14, or 28 cents a linear foot. Sold alone, it carries the full visit cost and prices at $138.02, or $2.76 a linear foot.
How much does sealing add to a driveway price?
In the sample, sealing an 864-square-foot driveway is a second visit priced at $593.05 at a sealer coverage of 300 square feet per gallon and $817.45 at 200. Ghostshield advises waiting at least 24 to 48 hours after pressure washing before sealing.
How are oil stains priced on a driveway?
Per stain, as a separate line. In the sample, each stain takes $2.00 of degreaser and five minutes of labor and is quoted at $10; a stain that does not lift is recorded as treated, not removed.
A 1,214-square-foot quote at 18 cents and a lone sidewalk at $2.76 a linear foot come from the same two inputs, the $61.94 visit and the $0.02829 square foot. The power washing software page shows the job record that holds both, and the earnings side of the same arithmetic is in pressure washing business profit margins; plans and Start free trial, 14 days with no card, are on pricing.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo