Guide
HVAC Business Profit Margins:Gross and Net Margin by Job Type, Technician Hours, a Four-Technician Sample Year and IRS Benchmarks
HVAC business profit margins: gross and net margin for repairs, maintenance and replacements, a sourced four-technician sample year and IRS benchmarks.
HVAC business profit margins are measured as gross margin, the share of revenue left after the direct cost of each job, and net margin, the share left after overhead. IRS data for plumbing, heating and air-conditioning corporations put them at 36.34% and 6.93% for tax year 2023; a sourced four-technician sample year earns 48.82% and 14.18%.
Each job type earns a different margin, and the company's figure is the blend. In the sample year below, a maintenance visit sold inside an agreement earns under a third of its price and a repair call over half, while a system replacement turns on what the equipment cost and how the customer paid. Technician hours that reach no job sit in overhead, so a company can price every call well and still report a thin net margin. FieldRanger makes HVAC software that runs inside HubSpot, and this guide belongs to the running and managing guides. It costs the three job types from published wages, equipment prices, mileage rates and card fees, separates applied from unapplied technician hours, builds overhead and a sample income statement, sets the result beside IRS data, and tests price, job mix, payment method and job length.
The general formulas, and how each margin differs from operating margin, are in the guides to gross profit margin and net profit margin. Here the terms are applied to one trade, and two of them decide the result. Direct costs are the costs that exist because a job was done: technician hours on the job and driving to it, equipment, parts, permits, van miles, the payment fee and any tax on the goods installed. Overhead is everything paid whether or not a job runs that day, including the technician hours that reach no job.
HVAC revenue by job type: repair calls, maintenance agreements and replacements
An HVAC company sells three kinds of work, and each has its own price and cost structure. Repair calls are priced per visit or from a flat-rate book and carry a small parts cost against a few technician hours. Maintenance visits are sold inside agreements, two visits a year in the sample, at a price chosen to keep the customer on the schedule rather than to earn on the visit. System replacements carry a large equipment cost against a high ticket and a full day of two technicians.
The sample year below is a hypothetical company with four technicians, and its job counts and prices are sample inputs: 1,600 repair calls at $425, 1,200 maintenance visits at $110 from 600 agreements at $220 a year, and 70 replacements of a 3-ton split air conditioner at $9,500. Agreement visits follow the tasks in the HVAC maintenance checklist.
Direct cost per HVAC job
Every rate in the table has a published source; the quantities per job are sample inputs.
Technician hours. The BLS median wage for heating, air conditioning and refrigeration mechanics and installers was $29.33 an hour in May 2025 (BLS Occupational Outlook Handbook, modified October 29, 2026). Wages were 70.0% of private industry employer compensation costs in June 2026 (BLS, Employer Costs for Employee Compensation, released September 9, 2026), so a loaded technician hour costs $41.90. The loading covers employer-paid benefits, including legally required ones such as workers' compensation, so no separate premium is added.
Equipment. HVACDirect listed the Goodman GLXS4BA3610, a 3-ton 14.3 SEER2 R-32 condenser, at $2,276.00, and the matching CAPTA3626B3 cased evaporator coil at $872.00 (HVACDirect, Goodman 3-ton condenser and cased coil, checked November 12, 2026): $3,148.00 for the pair. The condenser page states that the unit requires a refrigerant leakage detection system and must be paired with an R-32 air handler or coil that has one. A contractor's distributor price may differ from a retail listing.
Tax on equipment. The sample applies California's 7.25% statewide rate to the equipment and materials, following the lump sum treatment in CDTFA Publication 9: tax applies to the contractor's cost of materials and, for fixtures such as air-conditioning units with no separately stated price, to the fixture's cost (CDTFA Publication 9, February 2025). The same rules, applied to plumbing fixtures, are worked through in the guide to bookkeeping for plumbing business owners. Other states tax contractors differently.
Van and payment. The IRS business mileage rate is 76 cents a mile from July 1, 2026 (IRS, standard mileage rates, reviewed July 28, 2026), treated here as the van's whole cost. Stripe lists in-person card payments at 2.7% plus 5 cents and ACH Direct Debit at 0.8% capped at $5.00 (Stripe pricing, checked November 12, 2026); repairs and visits are paid by card, replacements by ACH.
| Line | Repair call, $425 | Maintenance visit, $110 | Replacement, $9,500 |
|---|---|---|---|
| Technician hours | 2.0 h × $41.90 = $83.80 | 1.25 h × $41.90 = $52.38 | 18 h (2 technicians × 9) × $41.90 = $754.20 |
| Equipment | None | None | $3,148.00 |
| Parts and materials | $85.00 (sample) | $12.00 filter and supplies (sample) | $650.00 line set, pad, disconnect and thermostat (sample) |
| Tax on equipment and materials | Not applied | Not applied | 7.25% × $3,798.00 = $275.36 |
| Permit | None | None | $150.00 (sample) |
| Van | 18 miles × $0.76 = $13.68 | 15 miles × $0.76 = $11.40 | 40 miles × $0.76 = $30.40 |
| Payment fee | Card, $11.53 | Card, $3.02 | ACH, capped at $5.00 |
| Direct cost per job | $194.01 | $78.80 | $5,012.96 |
| Gross profit per job | $230.99 | $31.20 | $4,487.04 |
| Gross margin | 54.35% | 28.36% | 47.23% |
The maintenance visit earns $31.20 on $110, a 28.36% margin, so an agreement is priced as a route to repairs and replacements rather than as profit on the visit. Equipment is 62.80% of a replacement's direct cost, so the price of the condenser and coil moves the replacement margin more than the two technicians' day does. Flat-rate prices built from the same inputs are set out in the HVAC flat rate pricing guide.
Technician hours: paid, applied and unapplied
Four technicians paid for 2,080 hours each give the company 8,320 paid hours, and the sample's jobs use 5,960 of them: 3,200 on repair calls, 1,500 on maintenance visits and 1,260 on replacements. The other 2,360 hours, 28.37% of the paid total, are unapplied: shop time, supply house runs, training, waiting for parts and gaps in the schedule. At $41.90 they cost $98,884.00, which the sample books as overhead.
Where those hours are booked changes the gross margin and leaves net margin alone. A company that costs jobs at a full day per technician, rather than at the hours clocked on each job, reports a lower gross margin and a lower overhead for the same year. Two companies' gross margins are comparable only when both book unapplied hours the same way. The share itself, 71.63% applied, is the productivity ratio defined in the guide to technician productivity.
Overhead for a four-technician HVAC company
Two overhead lines have published figures: Insureon reports median premiums for HVAC installation companies of $101 a month, or $1,213 a year, for general liability at $1 million per occurrence and $2 million aggregate with a $500 deductible, and $41 a month, or $495 a year, for tools and equipment coverage (Insureon, HVAC contractor insurance cost, updated August 24, 2026). The same page lists workers' compensation at $2,189 and commercial auto at $3,438 a year; the sample leaves both out because the labor loading already covers legally required benefits and the mileage rate covers the vans. The office staff are costed at the BLS median for customer service representatives, $21.53 an hour in May 2025 (BLS Occupational Outlook Handbook, modified October 29, 2026), loaded to $30.76.
The remaining overhead lines are sample inputs: the owner's salary as general manager, rent, marketing, software, warranty and callback work, accounting, tool depreciation and training. A plan built line by line for a new company is in the HVAC business plan guide.
Sample year for a four-technician HVAC company
| Line | Annual figure | Share of revenue | Basis |
|---|---|---|---|
| Repair call revenue | $680,000.00 | 46.04% | 1,600 × $425 |
| Maintenance revenue | $132,000.00 | 8.94% | 1,200 visits × $110 |
| Replacement revenue | $665,000.00 | 45.02% | 70 × $9,500 |
| Revenue | $1,477,000.00 | 100.00% | Sum |
| Direct costs | $755,883.20 | 51.18% | Job counts × direct cost per job |
| Gross profit | $721,116.80 | 48.82% | Gross margin |
| Unapplied technician hours | $98,884.00 | 6.69% | 2,360 hours × $41.90 |
| Office staff | $127,961.60 | 8.66% | 2 × 2,080 hours × $30.76 |
| Owner as general manager | $110,000.00 | 7.45% | Sample salary |
| General liability and tools coverage | $1,708.00 | 0.12% | Insureon medians |
| Miles not tied to a job | $9,120.00 | 0.62% | 4 vans × 3,000 miles (sample) × $0.76 |
| Rent and utilities | $36,000.00 | 2.44% | Sample input |
| Marketing | $74,000.00 | 5.01% | Sample input |
| Software, phones and office | $18,000.00 | 1.22% | Sample input |
| Warranty labor and callbacks | $15,000.00 | 1.02% | Sample input |
| Accounting, licenses and legal | $9,000.00 | 0.61% | Sample input |
| Tool and equipment depreciation | $8,000.00 | 0.54% | Sample input |
| Training and certification | $4,000.00 | 0.27% | Sample input |
| Overhead | $511,673.60 | 34.64% | Sum of the overhead lines |
| Net income before income tax | $209,443.20 | 14.18% | Net margin |
Repair calls earn $369,584.00 of the $721,116.80 gross profit, replacements $314,092.80 and maintenance $37,440.00. Replacements bring in almost as much revenue as repairs and earn $55,491.20 less gross profit, because $4,073.36 of each replacement's cost is equipment, materials and tax that carry no margin of their own. The office and the owner together cost $237,961.60, more than twice the unapplied technician hours. A buyer valuing this company would start from the same statement, with the owner's salary added back, as the guide to sell an HVAC business explains.
IRS benchmarks for plumbing, heating and air-conditioning contractors
No federal source publishes a margin for HVAC companies alone. The IRS Statistics of Income tables combine plumbing, heating and air-conditioning contractors, and the sole proprietorship table stops at specialty trade contractors as a whole.
| Group | Business receipts | Gross margin | Net margin |
|---|---|---|---|
| Corporations, plumbing, heating and air-conditioning contractors (86,269 returns) | $252.11 billion | 36.34% | 6.93% |
| Sole proprietorships, specialty trade contractors, all returns | $257.75 billion | Not published | 15.71% |
| Same group, returns with net income only | $229.36 billion | Not published | 21.20% |
Sources: IRS Statistics of Income, Returns of Active Corporations, Table 5.1, tax year 2023; IRS Statistics of Income, Nonfarm Sole Proprietorships, Table 1, March 2026. Corporate gross margin is business receipts less cost of goods sold; net margin is net income less deficit over business receipts. Sole proprietorship net margin is net income less deficit for all returns and net income for profitable returns.
The corporate figures deduct officers' compensation, 3.36% of receipts, and include interest, larger firms and commercial contractors; the full corporate income statement, scaled to one company, is laid out in the net profit margin guide. The sole proprietorship figures include the owner's pay, because an owner's draw is not an expense on Schedule C, and cover every specialty trade from roofing to electrical. The sample's 14.18% sits between the two: it pays the owner a $110,000 salary, which the corporate measure would also deduct, and carries no interest, no financing fees on replacements and no bad debt, each of which a real company's return can include.
The gross margins differ for a reason of bookkeeping as much as of work. The sample's 48.82% puts unapplied technician hours in overhead; the corporate 36.34% depends on how each firm split labor between cost of goods sold and salaries, a choice the table cannot show.
Margin effects of price, job mix, payment method and job length
Each change below is applied alone to the sample year, with every other input held where the income statement put it.
| Change | Gross margin | Net income | Net margin |
|---|---|---|---|
| Sample year as built | 48.82% | $209,443.20 | 14.18% |
| Replacement price 10% lower, $8,550 | 46.41% | $142,943.20 | 10.13% |
| 50 replacements instead of 70 | 49.06% | $104,618.40 | 8.13% |
| 1,400 repair calls instead of 1,600 | 48.49% | $146,485.20 | 10.52% |
| Replacements paid by card at 2.7% plus 5 cents instead of ACH | 47.63% | $191,834.70 | 12.99% |
| Repair calls taking 2.5 hours instead of 2.0, paid hours unchanged | 46.55% | $209,443.20 | 14.18% |
Losing 20 replacements costs $104,824.80 of net income and raises gross margin, because the lost jobs carried lower margins than repairs while overhead stayed the same; a falling replacement count can therefore look like an improving gross margin. Losing 200 repair calls costs $62,958.00, since the 400 technician hours they used become unapplied and are paid anyway. Card payment on replacements costs $256.55 a job against $5.00 by ACH, or $17,608.50 a year.
The last row is the measurement point: longer repair calls move 800 hours from unapplied overhead into direct cost, so gross margin falls 2.27 points and net margin does not move at all, while the schedule still has room. Once the board is full, the same extra half hour displaces calls, and the year starts to look like the 1,400-call row.
HVAC profit margin checklist
- Cost each job type separately: repair calls, maintenance visits and replacements.
- Cost technician hours at the loaded rate and record them against each job.
- Record equipment, materials, permits and tax on the goods installed as direct costs of the replacement.
- Book unapplied technician hours as their own overhead line, and keep the treatment the same every year.
- Record the payment method on each job and compare card fees with ACH on large tickets.
- Price maintenance agreements for the schedule they hold, and track the repairs and replacements that come from them.
- Compare the company's margins with IRS data only after matching how owner pay is treated.
- Verify the year: direct costs plus overhead plus net income equal revenue, and applied plus unapplied hours equal paid hours.
Job revenue, margin and technician time in FieldRanger
FieldRanger records the figures this guide is built from. Technicians clock in and out with time logged against each job, parts and materials used on each job are logged for job costing, and revenue reports show job revenue and margin by customer or service type, so repair calls, maintenance visits and replacements can be read as separate margins rather than one blend. Recurring job templates create the visits for maintenance agreements, and time window management sets arrival windows and tracks on-time performance.
Applied hours depend on the schedule, which is set by dispatch: the dispatcher assigns and reschedules jobs on a drag-and-drop calendar with every technician side by side, capacity planning prevents overbooking, skill-based assignment matches jobs to technicians by certification, and FieldRanger builds each technician's route for the day automatically. Estimates are built from the HubSpot deal or contact record or in FieldRanger, a won deal becomes a job with its context carried over, the invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Plans are listed on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
What is a good profit margin for an HVAC business?
IRS data for plumbing, heating and air-conditioning corporations show 36.34% gross and 6.93% net for tax year 2023. The four-technician sample in this guide, built from published wages, equipment prices and fees, earns 48.82% gross and 14.18% net with the owner paid a $110,000 salary.
What is the average HVAC business profit margin?
Federal data publish no figure for HVAC alone; corporations in the combined plumbing, heating and air-conditioning group reported 6.93% net income on business receipts for tax year 2023, and sole proprietorships in all specialty trades 15.71%, a figure that includes the owner's pay.
What is the gross margin on an HVAC system replacement?
In the sample, a 3-ton air conditioner replacement at $9,500 with $3,148 of equipment listed by HVACDirect, materials, tax, a permit and 18 technician hours costs $5,012.96, a 47.23% gross margin, and equipment is 62.80% of that direct cost.
Do HVAC maintenance agreements make money?
The sample's $110 maintenance visit earns $31.20, a 28.36% gross margin, the lowest of the three job types. Agreements are priced to hold customers on the schedule; their return comes from the repairs and replacements that follow.
What lowers an HVAC company's net margin fastest?
In the sample, losing 20 of 70 replacements takes net margin from 14.18% to 8.13%, and a 10% lower replacement price takes it to 10.13%. Losing 200 repair calls takes it to 10.52%, because the technicians are paid for the hours either way.
The sample's maintenance visit earns $31.20, the least of any job on the board, and it is the visit that puts a technician in front of the condenser a later $9,500 replacement removes.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo