Guide

Plumbing Business Expenses:Materials, Payroll, Vans, Tools, Insurance, Licenses, Software and Marketing, With IRS Deduction Rules and a Minnesota Sample Year

Plumbing business expenses by category: materials, payroll, vans, tools, insurance, licenses, software and marketing, with IRS rules and a Minnesota sample.

By Published Updated

14 min read

Plumbing business expenses fall into ten categories: materials and fixtures, labor and payroll taxes, vans, tools, insurance, licenses and bonds, software, marketing, premises and professional fees. In a sourced two-person Minnesota sample year, materials and labor are 62.87% of $170,283.72 of spending, and every line except half of the meals is deductible on Schedule C.

Expense records fail a plumbing company in two directions. Costs are missed: the employer half of Social Security on a helper's wages, the bond premium the license depends on, the parking at a downtown job. Costs are also deducted where the IRS does not allow them: the owner's draw, half of a supplier lunch, a van claimed at the mileage rate after it was depreciated. FieldRanger makes plumbing software that runs inside HubSpot, and this guide sets out the spending behind the jobs it schedules. It starts with the categories and their Schedule C lines and the IRS test every deduction must meet. It then takes each category in turn with published prices and rules, builds a sample year for an owner and one helper in Minnesota, lists the costs that are not deductible, and closes with a checklist.

Three terms carry the guide. An expense is money the business spends to operate; a deduction is the part of it the tax return may subtract from income; and the two differ by timing and by rule. Cost of goods sold is the materials and labor that go into the work itself, reported in Part III of Schedule C rather than among the operating expense lines. Overhead is the spending that continues whether or not a job runs that day.

Plumbing business expense categories and their Schedule C lines

A sole proprietor or single-member LLC reports plumbing business expenses on Schedule C, and each category has a line. A plumbing corporation files a different return with its own lines, but the categories are the same.

Plumbing expense categories and where each is reported on the 2025 Schedule C
CategoryWhat it includesSchedule C line
Materials and fixturesPipe, fittings, valves, water heaters and fixtures installedPart III, cost of goods sold
Labor and payroll taxesEmployee wages; employer Social Security, Medicare and unemployment taxLine 26 wages; line 23 taxes
VansStandard mileage, or fuel, repairs, insurance and depreciation; parking and tollsLine 9; line 13 for depreciation
Tools and equipmentDrain machines, press tools, cameras, hand toolsLine 13, line 22 or the de minimis safe harbor
InsuranceGeneral liability, workers' compensation, tools coverageLine 15
Licenses and bondsState contractor license, bond premium, permitsLine 23
Software and phonesAccounting, field service, CRM, phones and dataLine 18; line 25
MarketingSearch ads, listings, van lettering, printLine 8
PremisesShop rent, storage, utilitiesLine 20b; line 25
Professional feesAccountant, attorneyLine 17

The line matters for two reasons. Materials in Part III reduce gross profit, while the same dollars on line 22 reduce net profit only, so the choice changes the margin a lender reads. And the lines are where the IRS rules attach: line 9 carries the vehicle election, line 13 the depreciation elections, line 23 the license and payroll tax rules.

IRS deduction rules: ordinary and necessary expenses

The general test comes from Publication 334, the IRS tax guide for small business. "To be deductible, a business expense must be both ordinary and necessary." An ordinary expense is one common and accepted in the trade, a necessary expense is one helpful and appropriate for the business, and a necessary expense "does not have to be indispensable" (IRS Publication 334 (2025)). Drain cable, a press tool and a plumbing license all pass that test for a plumber in a way they would not for a bookkeeper.

The older reference has moved. The IRS states that it has "discontinued Publication 535, Business Expenses; the last revision was for 2022", and points readers to Publication 334 for most business expense topics, Publication 463 for vehicles and Publication 946 for depreciation (IRS, Publication 535 notice, reviewed June 27, 2026). Line-by-line rules are in the 2025 Instructions for Schedule C. The rules quoted below come from those three sources; a plumbing company's own accountant applies them to its facts.

Materials, fixtures and cost of goods sold

Materials are the largest single expense in the sample year, 35.82% of spending. Pipe, fittings, valves, water heaters and fixtures installed on jobs belong in cost of goods sold, Part III of Schedule C. The 2025 instructions allow a small business taxpayer to "choose not to keep an inventory", and under the approach for non-incidental materials and supplies, to deduct the cost "in the year in which they are first used or consumed" (Instructions for Schedule C). Fittings bought in December for a January job are therefore deducted in January.

The invoice is where materials meet revenue. A plumbing invoice that lists parts separately from labor, as the plumbing invoice template does, gives the books the figure to match against the supply house bill, and shows whether the markup covered the cost. Sales tax on materials follows state rules; the guide to bookkeeping for plumbing business records works through California's.

Helper wages and employer payroll taxes

Labor is the second category, 27.05% of the sample's spending. The helper is costed at the 2025 median for helpers of pipelayers, plumbers, pipefitters and steamfitters, $20.36 an hour, as reported by O*NET OnLine from BLS wage data: $42,348.80 for 2,080 hours. Wages go on line 26, which excludes "amounts paid to yourself" (Instructions for Schedule C).

Payroll taxes sit on top of the wage and go on line 23. The employer pays Social Security at 6.2% on wages up to the 2026 base of $184,500 and Medicare at 1.45% (IRS, Topic 751, reviewed November 9, 2026), $3,239.68 on the sample wage. Federal unemployment tax is 6.0% of the first $7,000 of each employee's wages, or 0.6% after the full credit for state unemployment tax paid on time (IRS, Topic 759, reviewed November 9, 2026), which is $42.00. Minnesota's own unemployment insurance rate depends on the employer's history; the sample carries 1% as a placeholder.

Van costs: standard mileage rate or actual expenses

The van can be deducted two ways, and the choice is made in its first year. The IRS business standard mileage rate is 72.5 cents a mile from January 1 to June 30, 2026, and 76 cents from July 1 (IRS, standard mileage rates, reviewed July 28, 2026). The sample van drives 11,000 business miles in each half of the year, a deduction of $16,335.00. The alternative is actual expenses: "gas, oil, repairs, tires, insurance, registration fees, licenses, and depreciation (or lease payments)", limited to the business share of miles (IRS, Topic 510, reviewed November 9, 2026).

Three conditions in Topic 510 decide whether the mileage rate is available. It must be chosen in the first year the vehicle is available for business use; the owner must not have used MACRS, a section 179 deduction or the special depreciation allowance on that vehicle; and the business must not operate five or more vehicles at the same time. Parking fees and tolls on business trips are separately deductible under either method, $420.00 in the sample. A shop that expects to reach five vans should plan for actual expenses from the start.

Tools and equipment: de minimis safe harbor, section 179 and bonus depreciation

Tools are deducted by price. The de minimis safe harbor lets a business without an audited financial statement deduct tangible property "up to $2,500 per item or invoice" in the year paid, rather than depreciating it, when the election is made on the return (Instructions for Schedule C). Core & Main's listing for the RIDGID K-400 drum machine with 75 feet of 3/8-inch cable, part 52363, showed $815.75 each, with a lower price of $665.06 also displayed (Core & Main, RIDGID K-400, checked November 2026); the sample budgets the higher figure, well inside the limit.

Larger items have their own elections. For tax years beginning in 2026, the maximum section 179 deduction is $2,560,000, reduced once qualifying property placed in service exceeds $4,090,000, and P.L. 119-21 "reinstated the 100% special depreciation allowance" for qualified property acquired and placed in service after January 19, 2025 (IRS Publication 946 (2025)). A $3,900 press tool kit, a sample price, can therefore be deducted in full in its first year on line 13. The same elections apply to a van on actual expenses, and they close the mileage-rate route for that van under the Topic 510 conditions above.

Insurance premiums for a plumbing contractor

Business insurance premiums are deductible on line 15. Publication 334 lists liability insurance and workers' compensation among the deductible kinds, and rules out self-insurance reserves and policies that replace lost earnings (IRS Publication 334). The owner's own health insurance is not a line 15 item; the Schedule C instructions point to Schedule 1, line 17, instead.

Insureon reports medians for plumbing contractors of $1,768 a year for general liability and $505 for tools and equipment coverage (Insureon, plumbing insurance cost, updated November 4, 2026). NEXT reports a workers' compensation median for plumbers of $209 a month, from its active customers over the previous 12 months (NEXT, plumbers insurance cost, data updated October 2026), or $2,508 a year. What each policy pays after a leak appears months later is covered in the guide to plumbing business insurance.

Minnesota plumbing contractor license, bond and insurance minimums

Licenses and regulatory fees paid to state or local governments are deductible on line 23 (Instructions for Schedule C). In Minnesota the license brings three further costs with it. A plumbing contractor must hold a plumbing contractor license or a restricted license, with a responsible individual who holds "an active master plumber license" (Minnesota DLI, plumbing contractor licensing basics, checked November 2026). "The initial license application and license renewal fee is $188," and licenses "expire on December 31 of odd-numbered years."

The same page requires a $25,000 surety bond on a DLI-approved form, proof of workers' compensation, and liability insurance with products liability limits "of at least $50,000 per person and $100,000 per occurrence" and property damage of at least $10,000. Those minimums are far below the $1 million per occurrence a commercial general liability policy carries, so the insurance line above already meets them. The bond premium is a license cost: Insureon's median for plumbing surety bonds is about $100 a year.

Software, phones and marketing

Software is a small category with a long list. QuickBooks lists Online Plus at $140 a month, with job and project profitability tracking and five users, and shows a promotional 50% discount for the first three months (QuickBooks pricing, checked November 2026). The sample budgets the list price, $1,680 a year, on line 18, beside a sample $2,400 for field service and CRM software and $1,560 for phones and data on line 25.

Marketing goes on line 8 and is a sample $9,000 in this guide: search ads, directory listings and van lettering. No published source gives a cost per booked plumbing job that applies across markets, so the figure is the owner's choice rather than a benchmark. Marketing is 5.29% of the sample's spending and 3.36% of its revenue.

Sample year of plumbing business expenses in Minnesota

The company is hypothetical: an owner who holds the master license and runs calls, one full-time helper, one van and a rented shop in the Twin Cities, filing Schedule C as a single-member LLC. Revenue is a sample $268,000. Published prices and rates are cited above; every line marked sample is a sample input.

Sample plumbing business expenses for one year, owner and helper, Minnesota (published rates and sample inputs)
ExpenseAmountBasisSchedule C
Materials and fixtures installed$61,000.00SamplePart III
Helper wages$42,348.802,080 h × $20.36Line 26
Employer Social Security and Medicare$3,239.687.65% of wagesLine 23
Federal unemployment tax$42.000.6% of $7,000Line 23
Minnesota unemployment insurance$423.491% of wages, sampleLine 23
Van, standard mileage$16,335.0011,000 mi × $0.725 + 11,000 mi × $0.76Line 9
Parking and tolls$420.00SampleLine 9
RIDGID K-400 drum machine$815.75Core & Main listingDe minimis safe harbor
Press tool kit$3,900.00SampleLine 13, section 179 or bonus
Hand tools, blades and bits$1,300.00SampleLine 22
General liability and tools coverage$2,273.00Insureon mediansLine 15
Workers' compensation$2,508.00NEXT medianLine 15
Plumbing contractor license and bond$288.00$188 DLI fee and $100 bondLine 23
Continuing education and code books$450.00SampleLine 27a
QuickBooks Online Plus$1,680.00$140 a month list priceLine 18
Field service and CRM software$2,400.00SampleLine 18
Phones and data$1,560.00SampleLine 25
Search ads, listings and van lettering$9,000.00SampleLine 8
Shop and storage rent$14,400.00SampleLine 20b
Shop utilities$2,400.00SampleLine 25
Accounting and legal$2,600.00SampleLine 17
Meals with suppliers and customers$900.00Sample, $450.00 deductibleLine 24b
Total spending$170,283.72Sum
Total deductible$169,833.72Meals at 50%
Net profit on Schedule C$98,166.28$268,000 less deductionsLine 31

Materials and labor together are $107,053.97, 62.87% of spending, and the van is the third-largest category at $16,755.00. Insurance, the license, the bond and continuing education together are $5,519.00, less than four months of the van's cost. The $98,166.28 of net profit is the owner's pay as well as the company's profit, because a sole proprietor's draw is not an expense; that same figure, with personal costs run through the business added back, is where a buyer starts, as the guide to sell plumbing business owners explains.

Costs that are not deductible on Schedule C

Five costs a plumbing owner pays fall outside Schedule C or are limited on it.

  1. The owner's draw. Money taken out by the owner is not wages; line 26 excludes amounts paid to the owner.
  2. Federal income tax and self-employment tax. The instructions for line 23 exclude federal income taxes, self-employment tax included (Instructions for Schedule C).
  3. The owner's health insurance. It may be deductible on Schedule 1, line 17, not on line 15.
  4. Half of business meals. Publication 334 states that meal deductions "generally remain limited to 50% of such expenses", which takes $450.00 off the sample's $900.00.
  5. Start-up costs above the first $5,000. A new company may elect to deduct up to $5,000 of start-up costs, reduced dollar for dollar once total start-up costs pass $50,000, and amortize the rest over 180 months (Instructions for Schedule C). The start-up budget itself is laid out in the plumbing business plan guide.

Plumbing expense checklist

  1. Post every expense to a category with its Schedule C line, and keep materials in Part III.
  2. Record the employer share of Social Security, Medicare and unemployment tax with each payroll.
  3. Choose the van method in the van's first year, and log miles by date and job either way.
  4. Record parking and tolls separately; they are deductible under both van methods.
  5. Make the de minimis safe harbor election on the return, and keep invoices for each tool under $2,500.
  6. Decide section 179 or bonus depreciation for larger tools with the accountant before year end.
  7. Keep license, bond and insurance certificates with their payment records.
  8. Exclude the owner's draw, income tax and the owner's health insurance from Schedule C.
  9. Verify the year: Schedule C deductions plus net profit equal revenue, and payroll tax lines match the payroll reports.

Job costs and expense records in FieldRanger

FieldRanger holds the job-level half of the expense record. Parts and materials used on each job are logged for job costing, plumbers clock in and out with time logged against each job, and odometer logging supports expense reports and IRS mileage records. Revenue reports show job revenue and margin by customer or service type, which is where the materials line meets the invoices it was spent on. The full margin picture for a three-plumber shop is worked through in the guide to plumbing business profitability.

The schedule and the books sit on the same records. Recurring job templates hold repeat service calls, the dispatcher assigns and reschedules jobs on a drag-and-drop calendar, and FieldRanger builds each technician's route for the day automatically. Estimates are built from the HubSpot deal or contact record or in FieldRanger, a won deal becomes a job with its context carried over, the invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Payroll is not built, so the helper's wages and payroll taxes run through a payroll service. Plans are listed on pricing, and Start free trial runs 14 days with no card.

Frequently asked questions

What are the biggest expenses for a plumbing business?

In the Minnesota sample, materials and fixtures are $61,000 and labor with payroll taxes $46,053.97, together 62.87% of $170,283.72 of spending. The van is next at $16,755.00 under the IRS standard mileage rate, and shop rent and utilities follow at $16,800.00.

What plumbing business expenses are tax deductible?

Expenses that are ordinary and necessary for the business, in Publication 334's words: materials, employee wages and payroll taxes, vehicle costs, tools, insurance premiums, license fees, software, marketing, rent and professional fees. Business meals are limited to 50%, and the owner's draw and income taxes are not deductible.

Can a plumber deduct tools in the year they are bought?

Yes, in the cases the IRS allows. The de minimis safe harbor covers items up to $2,500 per item or invoice, and section 179 or the 100% special depreciation allowance, reinstated for property acquired after January 19, 2025, covers larger tools when elected.

Should a plumbing van use the standard mileage rate or actual expenses?

The mileage rate, 76 cents a mile from July 1, 2026, must be chosen in the van's first business year and is unavailable once MACRS, section 179 or bonus depreciation has been claimed on that van, or for a business running five or more vehicles at once. Actual expenses suit a van with high costs per mile or a fleet.

How much does a Minnesota plumbing contractor license cost?

The Minnesota Department of Labor and Industry lists $188 for the initial license and each renewal, with licenses expiring on December 31 of odd-numbered years. The license also requires a $25,000 bond, workers' compensation and a master plumber as the responsible individual.

The Minnesota year spends $5,519 on the insurance, license, bond and training that let the owner work at all and $16,755 on the van that reaches the jobs, and only the van's figure depends on an election made in the van's first year.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo