Guide

Plumbing Invoice:Labor, Parts, Permit and Warranty Lines, Texas Sales Tax on Plumbing Repair and License Requirements

Plumbing invoice contents line by line: labor, parts, permit and warranty terms, how Texas taxes plumbing repair at homes and businesses, and license rules.

By Published Updated

11 min read

A plumbing invoice is the bill a plumbing company issues for completed work. It names the business and its license, the customer and the job site, and lists labor, parts, the service call fee, any permit fee and the warranty. Sales tax follows the state's rule for the property, and the invoice closes with the total and payment terms.

A plumbing invoice that is wrong in one line costs more than that line. In Texas, a drain repair at an office billed with no tax still owes tax on the whole charge; the same repair at a house billed with tax on the labor overcharges the homeowner; an invoice missing the master plumber's license number on its first page breaks a state board rule; a warranty written as "parts and labor, one year" brings a federal warranty law into play. FieldRanger makes plumbing software that runs inside HubSpot, and this guide is one of its invoicing and getting paid guides. It sets out the lines of a plumbing invoice, explains why tax follows the building, and covers Texas sales tax on residential and nonresidential repair. Three versions of one Houston invoice follow, then the Texas license requirements, warranty terms, batches of plumbing invoices, a checklist and the software record. The field-by-field layout, with a filled Washington example, is on the plumbing invoice template and is not repeated here.

Two Texas contract types decide the tax, as the Comptroller defines them. Under a lump-sum contract, the plumber charges one price for labor and materials, pays tax on the materials when buying them, and charges the customer no tax. Under a separated contract, the plumber charges separately for materials and labor, buys the materials with a resale certificate, and collects tax from the customer on the materials (Texas Comptroller Publication 94-116, real property repair and remodeling, checked November 12, 2026).

Plumbing invoice lines: labor, parts, service call, permit and warranty

Each line of a plumbing invoice answers a question the customer, the bookkeeper or the tax authority will ask:

  • Labor. Hours, the rate that applied, the plumber, and the work: the fixture or line, where it runs, what was removed and what was installed. Regular and after-hours hours go on separate lines when their rates differ.
  • Parts. Each part by size, material and quantity, at a unit price. "2-inch PVC, 10 feet" can be checked against the job; "materials, $77" cannot.
  • Service call fee. The charge for coming out, on its own line, so the customer sees it was quoted and not added.
  • Permit fee. The amount the city charged, with the permit number, passed through as its own line. In Texas, a separately stated building permit fee paid for the customer is excluded from the taxable total on a nonresidential repair (Publication 94-116).
  • Tax. The rate, the jurisdiction and the lines it applies to.
  • Warranty. What is covered, for how long, and who honors it: the company for its workmanship, the manufacturer for its product.
  • References. The estimate and work order numbers, so each price traces to the accepted estimate and each quantity to the completed work order.

The general fields every invoice carries, such as the invoice number, dates and payment terms, are listed on the invoice template.

Plumbing invoices and real property: why tax follows the building

Plumbing work is work on real property. Pipes, drains, fixtures and water heaters become part of the building, and many states tax work on a building differently from work on a movable item such as a washing machine. Texas draws two lines: residential against nonresidential property, and repair against new construction. A plumbing invoice cannot apply the right tax until the invoice records which kind of property the job was on.

The Comptroller defines residential real property as family dwellings, including apartment complexes, nursing homes, condominiums and retirement homes; hotels and residential property rented for less than 30 days are excluded, and the property need not be the owner's residence (Publication 94-116). An office, a restaurant, a store and a hotel are nonresidential. The job record therefore needs a property type field, filled at booking, not guessed at billing.

Texas sales tax on residential plumbing repair

"Labor to repair, remodel, or restore residential real property is not taxable" in Texas (Publication 94-116, checked November 12, 2026). The materials are taxed once, and the contract type decides who pays.

Under a lump-sum contract, the plumber pays tax on supplies, materials and equipment when buying them and charges the homeowner no tax. The invoice shows one price for the job and no tax line.

Under a separated contract, the plumber gives suppliers a resale certificate for materials incorporated into the property and collects state and local tax from the homeowner on the materials charge. The Comptroller adds that the charge for the materials must be at least what the plumber paid for them (Publication 94-116), so a separated invoice cannot move value out of the taxed materials line into the untaxed labor line.

Texas sales tax on nonresidential plumbing repair

Repair of nonresidential property is a taxable service in Texas. The Comptroller lists as taxable "all charges for labor and materials to rebuild, replace, alter, modify or upgrade existing nonresidential realty", and excludes from that category the addition of new usable square footage and scheduled and periodic maintenance (Texas Comptroller Publication 96-259, taxable services, January 2026). Tax is collected on the total charge for the job, including costs passed on to the customer, except a separately stated building permit fee paid for the customer; the plumber may give suppliers a resale certificate instead of paying tax on materials incorporated into the property (Publication 94-116).

The rate is the state's 6.25 percent plus local taxes of up to 2 percent, for a combined maximum of 8.25 percent (Texas Comptroller, sales and use tax, checked November 12, 2026). The Comptroller's city list shows Houston at 8.25 percent, made up of 1.00 percent city tax and 1.00 percent transit authority tax on top of the state rate (Texas Comptroller, city sales and use tax rates, checked November 12, 2026).

Sample invoices: one Houston drain repair billed three ways

The job is a sample: a cracked section of 2-inch cast-iron kitchen drain, cut out and replaced with PVC, at a house and, separately, at a dental office, both in Houston. The labor rate, hours, part prices, service call fee and permit fee are sample entries. The tax treatment and the 8.25 percent rate come from the Comptroller pages cited above.

Line items for the sample drain repair (sample prices)
LineQuantityUnit priceAmount
Service call fee1$89.00$89.00
Labor: locate, cut out cracked cast iron, install PVC, test3.5 hours$135.00$472.50
2-inch PVC pipe, 10 feet1$22.00$22.00
No-hub transition couplings, 2-inch2$16.50$33.00
PVC 45-degree elbows, 2-inch2$6.25$12.50
Primer and cement1$9.50$9.50
Plumbing permit, number shown (sample fee)1$65.00$65.00
Subtotal$703.50
Tax and total on the same job under three Texas treatments
InvoiceTaxable baseTax at 8.25%Total
House, lump-sum contractNone charged to the customer$0.00$703.50
House, separated contractMaterials, $77.00$6.35$709.85
Dental office, nonresidential repairEverything except the permit, $638.50$52.68$756.18

On the house, the lump-sum invoice shows one job price and no tax, and the plumber has already paid tax on the $77.00 of materials at the supply house. The separated invoice lists materials and labor apart and adds $6.35 of tax on the materials only. On the dental office, the service call, the labor and the parts are all part of the taxable charge, and only the separately stated permit fee is left out.

The errors run both ways. If the dental office invoice goes out with no tax line, $52.68 of tax is still due on the charge, and the plumber collects it later or pays it. If the house is billed the way the office is, the homeowner pays $52.68 on a repair Texas does not tax, against $6.35 on a correct separated invoice. Recording the property type at booking fixes both errors before the invoice exists.

License details on Texas plumbing invoices

Texas puts the license on the invoice itself. The first page of each written or electronic proposal, invoice or contract for plumbing services shows, in at least twelve-point type, the Responsible Master Plumber's first and last name, the license number, the phrase "regulated by the Texas State Board of Plumbing Examiners", and the Board's mailing address, phone number and website. The rule covers written estimates, service and billing invoices, receipts and any document that describes the services and charges (22 Tex. Admin. Code § 367.10, via Cornell LII, amended effective August 16, 2020, checked November 12, 2026).

The rule places those items on page one, so an invoice layout with the license in a page-two footer, or in nine-point type under the logo, does not meet it. The same section governs license numbers in advertising and on trucks, which the guide to plumbing marketing covers. Other states set their own requirements; the invoice template's license field holds whatever number the state or city issues.

Warranty terms on a plumbing invoice

A warranty line on a plumbing invoice can fall under federal law, depending on what it covers. The FTC's guide to the Magnuson-Moss Warranty Act states that "the Act does not apply to warranties on services", but that the Act does apply to a warranty covering "both the parts provided for a repair and the workmanship in making that repair". The Act covers consumer products, including property attached to or installed on real property, and its disclosure and pre-sale availability rules apply to written warranties on consumer products costing more than $15 (FTC, Businessperson's Guide to Federal Warranty Law, checked November 12, 2026).

Three warranty forms follow from that:

  • Workmanship only. "Labor warranted for one year on the repaired section" warrants a service and sits outside the Act.
  • Parts and workmanship. "Parts and labor warranted for one year" brings the Act's requirements into play for the consumer products installed, so its terms are written out in full: what is covered, for how long, what the customer must do to claim, and what is excluded.
  • Manufacturer's warranty passed through. On a water heater or a fixture, the invoice names the manufacturer, the model and serial numbers, and the installation date, which the manufacturer's claim process will ask for.

Plumbing invoices in batches: numbering, commercial accounts and changes from the estimate

Plumbing invoices for a busy company share three needs that a single bill does not show. Numbers come from one unbroken sequence, so the books account for every invoice issued, including voided ones. Commercial accounts with recurring drain or backflow work receive one invoice per visit, each referencing the account's service agreement and purchase order. Work added on site, such as a corroded shut-off replaced during a drain call, appears as its own line with the customer's approval noted, rather than inside a revised total.

A paid invoice that turns out wrong is corrected with a credit memo and a new invoice, not edited, so the record shows what the customer was billed and when. The plumbing invoice template has every field and a filled burst-pipe example.

Plumbing invoice checklist

  1. Record the property type, residential or nonresidential, at booking.
  2. In Texas, choose lump-sum or separated billing for residential work before buying the materials, since the choice decides whether tax is paid at purchase or collected from the customer.
  3. List labor, parts, the service call and the permit fee on separate lines, with the permit number.
  4. Apply tax by the state's rule for the property and the location rate, and show the base it applies to.
  5. Put the Texas license details on page one in at least twelve-point type.
  6. Write the warranty out: workmanship only, or parts and workmanship with full terms, and any manufacturer's warranty with model and serial numbers.
  7. Reference the estimate and work order numbers, and show approved extra work as its own line.
  8. Before sending, check that the hours match the work order and that the tax base matches the property type.

Labor hours, parts and payment on the FieldRanger job record

A plumbing invoice copies the job record, and each copy by hand is a chance to drop an hour or a coupling. FieldRanger builds the invoice from the record instead. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and tied to the deal it belongs to, and a won deal becomes a job with its context carried over. The plumber clocks in and out with time logged against the job, and the invoice is generated from the completed work order, so the labor line carries the hours on the clock.

Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks, where the books and the tax return are kept. Revenue reports show job revenue and margin by customer or service type, which separates residential repairs from commercial accounts. The contractor invoicing software page shows the step from the last task on site to a paid invoice.

Frequently asked questions

What should a plumbing invoice include?

The business name and any license number the state requires, the invoice number and dates, the customer and job site, labor with hours and rate, parts by size and quantity, the service call fee, any permit fee with its number, sales tax by the state's rule for the property, the total, payment terms and the warranty.

Do plumbers charge sales tax in Texas?

It depends on the property. Labor to repair residential property is not taxable, and materials are taxed at purchase under a lump-sum contract or collected from the customer under a separated contract. Repair of nonresidential property is taxable on the total charge, except a separately stated permit fee.

Is plumbing labor taxable on a commercial building in Texas?

Yes. The Texas Comptroller lists labor and materials to repair, replace or upgrade existing nonresidential real property as taxable, so the tax applies to the full repair charge.

Does a Texas plumbing invoice need a license number?

Yes. 22 Tex. Admin. Code § 367.10 requires the Responsible Master Plumber's name and license number, the phrase "regulated by the Texas State Board of Plumbing Examiners" and the Board's contact details on the first page of each invoice, in at least twelve-point type.

Should a plumbing invoice include a warranty?

It should state whatever warranty the company gives. A workmanship-only warranty is a service warranty outside the Magnuson-Moss Warranty Act; a warranty on parts and workmanship falls under the Act for the products installed, so its terms are written out in full.

How should plumbing invoices be numbered?

From one unbroken sequence, never reused, with voided invoices kept. A paid invoice that needs correcting is reversed with a credit memo and reissued, so the record shows what was billed and when.

The Houston drain repair costs the dental office $756.18 and the homeowner $703.50 or $709.85 for the same 3.5 hours and the same $77.00 of PVC, and the difference is decided by one field filled in when the call was booked. Billing terms, deposits and late payments are covered in the invoicing and getting paid guides, the plumbing invoice template lays out every field, and FieldRanger's pricing page lists the plans, with Start free trial for 14 days and no card.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo